Re: [j-nsp] srx cluster - control and data link throuigh cisco nexus switches

Le 30/05/2013 07:28, Andrew Jones a écrit : There is a hidden command you can use which is show chassis cluster information detail which will give you a lot more information about how the cluster is set up on each node and if there are any errors in regards to the control link and fabric link.

[j-nsp] srx cluster - control and data link throuigh cisco nexus switches

Hi all, I'm currently trying to setup a cluster of srx3400 using a pair of cisco nexus to connect control and data link for redundancy. Junos Version is 11.4r7. Each SRX3400 uses one RE, one CRM, one SPC and one NPC. The first node from the cluster is fine but the second node doesn't come

Re: [j-nsp] srx cluster - control and data link throuigh cisco nexus switches

Le 30/05/2013 02:53, Nicholas Oas a écrit : Is igmp snoop disabled on the Ethernet ports which connect the data and control links? Yes it is. I forgot to mention that. ___ juniper-nsp mailing list juniper-nsp@puck.nether.net

Re: [j-nsp] srx cluster - control and data link throuigh cisco nexus switches

Hi all, some questions this morning : - can I use the same vlan for both control links ? (em0 and em1 use the same ip address). - can I use the same vlan for control and data link ? thanks ___ juniper-nsp mailing list juniper-nsp@puck.nether.net

Re: [j-nsp] srx cluster - control and data link throuigh cisco nexus switches

There is a hidden command you can use which is show chassis cluster information detail which will give you a lot more information about how the cluster is set up on each node and if there are any errors in regards to the control link and fabric link. In particular check that the control port