I have successfully designed a few boards using Atmel processors in an
MLF32 package. This has a 0.5mm pin pitch and it causes a few problems
(search for my OPs for details), but they are not totally insurmountable
as you will see from the OPs and follow-up posts.
Obviously one needs to
Hi,
We have used Kicad in all our designs since 2005.
For example, Altera FPGA 484 pins BGA, 0.0060 Clearance, 0.0039 mask
clearance, 6 layers, 0402 capacitors, through vias.
All routings are hand made and boards are in production.
Regards,
Pedro.
I am doing a small research if KICAD will
Hi,
is there any resource for success stories about using KICAD?
Not only what company but also what circuit / application and what
package density / types used.
I am asking again, because I would wish to see some projects about
targeting mobile phone / smart phone
or PDA like complexity.
Lothar:
I use KICAD to design all of my boards. They vary from DIP parts
down to fine pitch (.020 pitch) parts. A PDF of the schematic and
board layout for each of my boards is available on my website.
Dave - WB6DHW
http://wb6dhw.com
Lothar Behrens wrote:
Hi,
is there any
Thanks.
If comparing the Samsung 2442 chip pin distance of 0.8 millimeter,
creating a module in KICAD would be doable.
(http://www.opatnet.cz/elektronika/datasheet/U/um_s3c2442b_rev12.pdf)
Here are the other components that are used in the FreeRunner:
Do a Google search on DG8SAQ or/and the VNWA2 Vector Analyzer.
The pcb is visible on some photo's.
The pcb and all the schematics where done with KiCad.
//Dan, M0DFI
On Monday 20 April 2009 15:24:42 Lothar Behrens wrote:
Hi,
is there any resource for success stories about using KICAD?
On Mon, Apr 20, 2009 at 11:56 AM, Dave - WB6DHW brain...@wildblue.netwrote:
Lothar Behrens wrote:
Hi,
is there any resource for success stories about using KICAD?
Not only what company but also what circuit / application and what
package density / types used.
I am asking again,
Am 20.04.2009 um 20:34 schrieb Steve Weigold:
On Mon, Apr 20, 2009 at 11:56 AM, Dave - WB6DHW
brain...@wildblue.netwrote:
Lothar Behrens wrote:
Hi,
is there any resource for success stories about using KICAD?
Not only what company but also what circuit / application and what