e and assumed the biblionumber that I assigned.
Steve SowderSystems Librarian
sow...@andrews.edu Andrews University
On 10/29/2015 2:15 PM, Chris Cormack wrote:
Hi Tim
You could edit either the .tt file or make a custom XSLT file to do that.
But please do
-PMH compliance isn't about the database. It is the interface. The
interface receives a request from a computer (or a human via a browser),
queries the database and send the appropriate response to the requester.
[In theory the database could be a flat file if not too large. Less than
about
Just compare the clock speeds and the amount of RAM available.
The raspberry pi 2 is a fast single board computer but is slow compared
to a low level desktop.
Steve
sow...@andrews.edu
On 8/25/2015 12:40 PM, King, Fred wrote:
> Just curious--why do you think a low level desktop would be better t
Try Halifax Public Library
catalogue.halifaxpubliclibraries.ca
Port 210
Database: Horizon
Location: CAN
Syntax USMARC
Steve Sowder
BTW: I don't know what you use but I find BibDataZu client to be very
useful and it free.
On 8/20/2015 10:52 AM, Paul A wrote:
> At 12:51 AM 8/20/2015 +0
I am also interested in that script.
Thanks
Steve
sow...@andrews.edu
On 8/19/2015 4:03 AM, Jerwyn wrote:
Hi Nick,
I'm interested with your script, I might be needing this sometime in the
future.
Kind regards,
On Wed, Aug 19, 2015 at 3:26 AM, Nick Clemens [via Koha] <
ml-node+s1045719n584985
o make all
records new instead of overlaying any existing records.
We have to revert and try reloading one or more times before it
recognizes the matched records and overlays them.
I have noted this problem twice before on this listserv but there was no
response. Its a deal killer.
St
How about a list of providers that is recommended by _customers_?
With a provider being removed one year after the last recommendation.
Steve
sow...@andrews.edu
On 7/1/2015 1:44 PM, Mark Tompsett wrote:
> Greetings,
>
>> It would be nice if people could find out I am contributing
>> stuff witho
s since then are done "automatically" when a clean
update is available.
Thanks for any help.
Steve Sowder Systems Librarian
sow...@andrews.edu Andrews University
Steve
___
Koha mailing list http://koha-community.or
Other than the scores I have the same setup that you show.
However, I also have problems matching on records in this matching rules
and in others.
I can load 5,000 records with a mix of updates and new records. It will
show me records that match in the display. But, it treats all 5,000 as
ne
for upload settings in your Apache configuration.
Hope this helps.
Fabio
2014-08-12 19:58 GMT+02:00 Steve Sowder mailto:sow...@andrews.edu>>:
> I can't get past 0% when more than about 500 records being loaded.
> Sometimes even as few as 200 records it
ity on the
job complete. It is still at 0%.
I have not checked timeout.
I will look for that and try it on my next load.
Steve
Hope this helps.
Fabio
2014-08-12 19:58 GMT+02:00 Steve Sowder mailto:sow...@andrews.edu>>:
I can't get past 0% when more than about 500 records b
s if it is the latter. If it is the former, you might want
to have a look at the documentation for that script:
http://perldoc.koha-community.org/misc/migration_tools/build_oai_sets.html
Best regards,
Magnus
On 30 July 2014 17:36, Steve Sowder wrote:
This is what I know.
I have read again the in
I can't get past 0% when more than about 500 records being loaded.
Sometimes even as few as 200 records it is stuck at 0%. (Even after
waiting 24 hours.)
So, I open another instance and look a Staged record Management.
It tells me that the load is Staged so I click on the file name and then
on
I have discovered that if you have a record that is in multiple OAI Sets
you cannot use the same MARC tag for mapping them.
Thus, if you have two sets with mapping as
590a is equal to TOM
590a is equal to MARY
And a record with
...
590a TOM
590a MARY
...
This record will be in the OA
We have an instance of Koha running on VMWare.
OS is Ubuntu.
It is a test system and is used to discover quirks, tweaks, and problems
with Koha. We are planning to go live to support Discovery platforms
with the OAI-PMH database. Still grappling with issues with the OAI
datasets.
Steve
sow.
a list with an invalid SetSpec (i.e. "joke") gives you all
of the records. Same as no SetSpec at all. It probably should give an
error. No such "set".
Steve
sow...@andres.edu
On 7/30/2014 11:36 AM, Steve Sowder wrote:
This is what I know.
I have read again the info
This is what I know.
I have read again the info at
http://www.openarchives.org/OAI/openarchivesprotocol.html#Set
It now makes more sense to me.
OAI databases are created with the full records of the database.
In our case that is about 190,000 records.
SetSpecs are subsets of the database (for
On 7/25/2014 12:08 PM, Galen Charlton wrote:
Hi,
On Thu, Jul 24, 2014 at 11:26 AM, Steve Sowder wrote:
I have defined an OAI Data set.
In my set mapping I have
"595s matches SDAPI" (but in the nomenclature of Koha)
Could you reply with the exact mappings you've defin
I have defined an OAI Data set.
In my set mapping I have
"595s matches SDAPI" (but in the nomenclature of Koha)
After running the program to build the set, the resulting OAI file has
_all_ records the database. Not just the ones that matches the map.
What am I not doing correctly?
Note: We ar
Does the program build_oai_sets.pl need to know which setname to build?
Without a setname does it build an OAI-PMH file with the entire database
as content?
Steve
sow...@andrews.edu
___
Koha mailing list http://koha-community.org
Koha@lists.katipo.c
controls under Advanced constraints. in 3.14 or
later, it's a matter of ticking the correct boxes.
Earlier versions you need to enter the correct number for the
display you
want - http://manual.koha-community.org/3.2/en/catadmin.html
On Wed, Jul 23, 2014 at 4:35 PM, Steve
admin.html
On Wed, Jul 23, 2014 at 4:35 PM, Steve Sowder mailto:sow...@andrews.edu>> wrote:
Responding with more data to my own question.
The MARC tag 595 is not displayed anywhere in Koha.
However, if the record is exported (buy bib number range) the 595
tags are present
ran the program to create an OAI-PMH file but none of the records
defined by the map were included. Just about everything else was however.
Still wondering how to display _all_ of the contents of the record when
editing?
Steve
On 7/23/2014 10:45 AM, Steve Sowder wrote:
I have altered the
nor the 595 is included in the
list of the tags. What do I do to get the editor to include all of the
tags that are in the framework?
Thanks
Steve Sowder Systems Librarian
sow...@andrews.edu Andrews University
___
Koha mailing list
I tried Ramiro's link and got an "OAI-PMH service not enabled".
Which reminded me that I had turned on "OAI-PMH".
I did that and now it responds to the link.
I still need to snoop around but I think I am pointing in the right
direction now.
Thanks
Steve
On 7/22/2014 4:31 PM, ramirouvia .
4 x86_64 x86_64 x86_64 GNU/Linux
MySQL version: mysql Ver 14.14 Distrib 5.5.38, for debian-linux-gnu
(x86_64) using readline 6.2
If any of that helps.
Thanks
Steve Sowder Systems Librarian
sow...@andrews.edu Andrews University
__
For someone trying to make up their mind choosing between Evergreen and
Koha the website would send them to Evergreen.
Just because you are a Koha true believer (this is the Koha listserv!)
doesn't mean that everyone else will choose Koha.
There is nothing in the comparison to indicate versio
alhost' (using password: YES)
at /usr/share/koha/lib/C4/Context.pm line 802.
I need to know (or where it is set) what the DBC_DBUSERS and password
for it are set.
>>>
Where do we go from here?
Thanks for any help.
Steve Sowder Systems Librarian
sow...@andrews.edu
cords with a tag 024 than begins with '030'.
(Regex would be really nice.)
Then I want to export the records in the list.
Is this possible in Koha?
Thanks
Steve Sowder Systems Librarian
sow...@andrews.edu Andrews University
_
because some just don't hang during the load process.
Thanks again.
Steve
On 3/10/2014 6:42 PM, Chris Cormack wrote:
On 11 March 2014 11:38, Steve Sowder wrote:
I am new to Koha.
I am exploring Koha for possible use on future projects.
I have Koha running with 52,000+ bib records loade
number.
It has also reloaded on marc tag 035 but I haven't been able to do that
for the past week.
Please point me in the right direction.
Thanks
Steve Sowder Systems Librarian
sow...@andrews.eduAndrews University
___
31 matches
Mail list logo