KR> Tail Addition and fuselage lengths

My dimensions are 116.5" (9' 8.5") from L.E. Of fwd spar to lowest connection point of Aft Vert Spar. And from aft side of Firewall to L.E of Fwd spar is 24.25". (2' 1/2")

KR> aileron Bell crank AS5048 airfoil

I apologize, I did leave a lot of the question out. My specific question should have been" With the pulley that you see in the video, do you believe that the bell crank will have enough travel to effectively move the aileron to full recommended deflection? Yes the other cable will be as

KR> aileron Bell crank AS5048 airfoil

I was able to keep the everything the same on my installation except I swapped the pulleys. This allowed me to have the cable higher since the rear spar is raised up on the New airfoil. You can see how I did it at mykitlog.com/vr6chris. Chris Pryce Burlington, NJ

KR> Tail Addition and fuselage lengths

As you can see most every KR is different. My KR is stock KR2 with fuselage extended 24 inches behind the forward spar. My dimensions are: 154 3/4 inches from forward face of firewall to rear of vertical tail post, and 23 inches from rear face of firewall 1/4" ply to forward face of front

KR> aileron Bell crank AS5048 airfoil

At 11:12 AM 2/18/2016, you wrote: >Please check this video and tell me if you think it will work. +++ Can't really tell without seeing how you intend to close the "loop" on the system. What is the system from the stick to the bellcrank? Also,

KR> aileron Bell crank AS5048 airfoil

Yes on the sarcasm. Lol. I prefer aluminum tube to side of bell crank next to spar. Or "pull-pull" cable. You will probably get several better ideas before long. I don't see how it would work as shown on video. Good luck. On Feb 18, 2016 12:54 PM, "Adam via KRnet" wrote: > Via Cable? Yes, or

KR> aileron Bell crank AS5048 airfoil

Via Cable? Yes, or was I supposed to read the sarcasm in that statement? Adam Tippin A KR2S builder > On Feb 18, 2016, at 1:17 PM, Mike Arnold via KRnet > wrote: > > Adam can you reach the bell crank from the cockpit??? >

KR> aileron Bell crank AS5048 airfoil

Adam can you reach the bell crank from the cockpit??? On Feb 18, 2016 11:14 AM, "Adam Tippin via KRnet" wrote: > Please check this video and tell me if you think it will work. If not > think of some recommendations to make it work please and thank you.Youtube > Link

KR> aileron Bell crank AS5048 airfoil

Please check this video and tell me if you think it will work. If not think of some recommendations to make it work please and thank you.Youtube Link