Re: KR> KR-2 hydraulic brake upgrade for the original Kr retracting landing ear

Save yourself a lot of aggravation and get a set of Matco 5X5. You will love them and will probably never have to ask this question again. My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC ___ Search the KRnet

Re: KR> WunderBird

Not working, no pic. Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Mark Jones via KRnet Sent: Monday, February 8, 2021 5:59 PM To: KRnet Cc: Mark Jones Subject: KR> WunderBird Just had a visit from two awesome folks. Bernie and Dee Wunder. I am attempting

Re: KR> Auto Pilot comment

Dynon, driven by the Dynon D10A, at the time with GPS fed from an Ifly 720.. I have since upgraded to the complete Dynon Skyview system using that same AP. As far as I know, Joe Horton was the first one to put an AP in a KR and it was the Dynon. I asked him to show me his installation at a KR

Re: KR> Auto Pilot comment

Just need to make one comment on this about auto pilot in a KR. I had one in my KR2, and definitely could have filled out my log book while on AP. Daniel R. Heath - Lexington, SC -Original Message- I once flew with a guy that filled out his log book while on autopilot. You are not go

Re: KR> KR2 wheels / brakes

What size tubing are you using and what brand of brake? Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Flesner via KRnet Sent: Saturday, January 30, 2021 9:37 AM To: krnet@list.krnet.org Cc: Flesner Subject: KR> KR2 wheels / brakes On 1/29/2021 10:52 PM, Dr.

Re: KR> Cowling?

Just FYI. I had a WW Cowl on my KR2. I do not believe that it was made for a KR2, and it was sold to me as a KR2S and was built for a KR2S. I had to make some modification to the cowl to make it fit my KR2. It was definitely better than starting from scratch. My Panther Building Documentation

Re: KR> invitation to fly

Yes, looking at that photo makes me wish I had a 2S with my current engine and instruments. My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Flesner via KRnet Sent: Saturday, November 28, 2020 7:13 PM T

Re: KR> Sport aviation article

I don't mean to be contrary here, but what was significant about the Taylor Monoplane to our industry? Yes, RR basically copied the design, but proved that foam and fiberglass construction could be used in full scale aircraft. Daniel R. Heath - Lexington, SC -Original Message- From: KRn

KR> EAA's ignorance of the significance of Ken and Stu's design of the KR.

Larry, I am sure that all KR builders appreciate your staying tuned in to this issue, I know that I do. I remember how the EAA treated (mis-treated) the acknowledgement of the KR at the 25 anniversary in Oshkosh. It was shameful and embarrassing to me, at that time. My Panther Building Docum

Re: KR> "Opera windows

Try 3M 5300 You can get it at your West Marine store. It wipes clean with denatured alcohol, before it is cured. It is what my canopy bubble is installed with. It remains flexible but your window will not come out without destructing it. I used clecos to hold the bubble in place and after it w

Re: KR> Panther YouTube

Phil, Congratulations on your retirement. Here is the completed flight video on UTube: https://youtu.be/ssPYk8ELApY My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Phillip Matheson via KRnet Sent: Fri

Re: KR> First Flight

, September 4, 2020 8:39 PM To: krnet@list.krnet.org Cc: Flesner Subject: Re: KR> First Flight On 9/4/2020 6:56 PM, Daniel Heath via KRnet wrote: > Yes, I am sure of that and may try it one day. I have heard that they > are heavier than the ones we us

Re: KR> First Flight

It seems that the first submission to UTube cut off the front of the video. This one seems to have it all. https://www.youtube.com/watch?v=4pC4WnR9nBI&t=6s My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC ___

Re: KR> First Flight

Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Flesner via KRnet Sent: Friday, September 4, 2020 7:13 PM To: Daniel Heath via KRnet Cc: Flesner Subject: Re: KR> First Flight Dan, A Matco pneumatic tail wh

KR> First Flight

This is not KR related other than the engine I am flying behind that I think would be perfect for the KR2S Click on this link to the U-Tube video. There is no music because I prefer airplane noise. I hope you do as well. https://youtu.be/QFmGPZUMLvQ

KR> Tricycles drive better. Tailwheels fly better.

Regarding this subject, I must disagree on both accounts. It is more up to the configuration of the plane. Steering with brakes cannot be as good as steering with rudder pedals. But some trikes do steer with rudder pedals. The KR however, trike steers with brake and the conventional steers with

Re: KR> first flight

>> On 9/3/2020 6:13 PM, Daniel Heath via KRnet wrote: >> My first flight in the Panther was today and it was great. > > > > Congratulations, Dan. We better see you at the next Gathering o

Re: KR> first flight

On Behalf Of Flesner via KRnet Sent: Thursday, September 3, 2020 7:24 PM To: Daniel Heath via KRnet Cc: Flesner Subject: KR> first flight On 9/3/2020 6:13 PM, Daniel Heath via KRnet wrote: > My first flight in the Panther was today and it was

Re: KR> PNW Mini FlyIn #2

Mike, Jim was one of my very best KR friends. What happened to him, should happen to no one. Thanks for writing this. PS: I think you could fly anything, not to take anything away from Jim's plane. And, PPS: My first flight in the Panther was today and it was great. My Panther Building D

KR> Wing Gap Covers

I made a post on the PantherBuilder site, using what used to be on KRBuilder.org, which no longer exists. This post will show how I made the wing gap covers for the Black Bird. This is my "green glass" method of making wing gap covers. You should make these where you can monitor the progress o

KR> Paint Protection Film

Check this out. https://www.flyboyaccessories.com/searchresults.asp?Search=paint+protection &Submit= My Panther Building Documentation at PantherBuilder.org Daniel R.

Re: KR> cht / egt instrument

I have many friends at our airport who are RV builders and many are flying. For me, from what I have heard and seen, I would go with Garmin or Dynon all the way. You won't regret it, either way. The price is about the same, but even though, I am Dynon all the way, I believe your resale value will

Re: KR> Dan Heath

danrh...@gmail.com My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Phillip Matheson via KRnet Sent: Monday, July 27, 2020 4:45 PM To: KRnet Cc: Phillip Matheson Subject: KR> Dan Heath Sorry guys. Dan

Re: KR> trip home

My favorite kind of flying. On the way to the KR Gathering in 2013, I was at a GPS ALT of 14,000 and was splitting clouts like that. Awesome. My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Flesner via

Re: KR> cht / egt instrument

Larry, Looks very nice for a "steam gauge" panel. Just wondering if you will ever consider going to a "Glass" panel. My Panther Building Documentation at PantherBuilder.org Daniel R. Heath - Lexington, SC -Original Message- Cc: Flesner Subject: KR> cht / egt instrument Aircraft Spru

Re: KR> Propeller

I have been intending to post about Props for some time now. I decided on a 3 blade Ground Adjustable 60" Whirlwind prop for my Panther 130HP engine. It was mostly just for the WOW factor. I understand that 2 blade are supposed to be faster. However, several things have come to mind since I h

Re: KR> Carbs - KRNet rule violation

This is a violation of KRNet rules. Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of John Martindale via KRnet Sent: Thursday, March 26, 2020 10:02 PM To: 'KRnet' Cc: John Martindale Subject: Re: KR> Carbs Well, I know that most Americans on this site are

Re: KR> Windshield

Plexiglas. Do not use Lexan. If you need more information on this let me know. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Flesner via KRnet Sent: Sunday, March 8, 2020 5:53 PM To: victor taylo

KR> Avgas - UL94

What experiences have been had by KR pilots, with UL94? My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST

Re: KR> Engine Selection

Given the vote for the Rotax, I can only assume that you are amenable to the more expensive engines. For the same weight and cost of a Rotax, you can get a UL Power. You should at least look into it. It is a more conventional configuration like the O-200, than is the Rotax. I am using the UL

Re: KR> 'Oh God it's going to crash' light plane slams into ferris wheel

Are you saying that it is NOT a Sierra? My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Phillip Matheson via KRnet Sent: Thursday, January 9, 2020 7:45 PM To: KRnet Cc: Phillip Matheson Subject: KR

Re: KR> wildfires down under

Thinking of you Phil, as I see continuing reports of the devastation down under. While it hurts to see what is happening to Australia, I am specially concerned for you and your family and hope that this disaster has been kept away from you. My Panther Building Documentation at PantherBuilder Web

KR> KRBuilder.org

I have been considering the eventual demise of KRBuilder.org. There several reasons for this, one is that I am now building a Panther. Another, virtually made the decision for me. The HTML GODS that be, eliminated the use of Frames and Framesets, which is the main architecture for KRBuilder, and

Re: KR> Fwd: [The Pulse of Aviation] Welcome to the cusp of yet another new age

Is there a link somewhate? Daniel R. Heath - Lexington, SC -Original Message- From: KRnet On Behalf Of Chris Gardiner via KRnet Sent: Wednesday, November 27, 2019 8:31 PM To: krnet@list.krnet.org Cc: Chris Gardiner Subject: KR> Fwd: [The Pulse of Aviation] Welcome to the cusp of yet ano

Re: KR> propellers

Interesting. It made me think of all the concern that I had back in the day, about the length(exceeding the speed of sound), and Ground clearance(Prop destruction), for choosing the right prop for my KR. I never really considered the 3 blade prop, which would have solved both of those issues. Yo

Re: KR> Battery for Revmaster 2100D

Odyssey PC 680. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2019/ KMVN/ Sept 26-28 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best Interior at 2013 - KR Ga

KR> Jim Moorehead

I am sad to have to let you know that Jim Moorehead has died. The family is trying to get in touch with Jack Daughority to let him know. Jack has called him and me often, but I have not heard from Jack in several months and the number I have for Jack has been disconnected. If anyone kno

Re: KR> High speed taxi

I just read a report from a Panther builder about his first flight. It started out as a "high speed taxi test". I assume that because it was only to be a test, he must have not followed his pre-flight check list. Thus, the flaps were full down. The plane jumped up off the runway, and he then ha

Re: KR> Props

I will second that. No one stands behind their product any better than Ed. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2019/ KMVN/ Sept 26-28 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gather

Re: KR> Weighing your airplane

On the Black Bird, I borrowed a set of scales used to weigh race cars. I just got lucky finding someone willing to lend them to me. Tried bathroom scales in many different configurations and for me, that was a joke. For now, I have gone in with several others in our EAA Chapter and purchased a s

Re: KR> Tail Wheel Spring

Don't know, but you could try this. http://krbuilder.org/MakingTailWheelSpring/index.html See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2019/ KMVN/ Sept 26-28 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best

Re: KR> get-together in the South

Wheel land. The stick is bottomed out in my lap and then the mains hit, the tail goes down, and it's flying again, momentarily, then repeat about three times and finally gives it up.

Re: KR> fuel flow sensors

I have a Dynon ( don't think it is made by Dynon ) "Red Cube" for sale, half price of the new rate and only used for a couple hours. Don't need it now as the new engine comes with the capability built in. If interested, I will look up the price. It is way less than $349. See N64KR at

Re: KR> Glue for foam.

Mark, I used hot glue. I like it because it is easy to remove below the surface with a zip knife, then fill in with micro. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- I am just curious. What glue have y’all used for

KR> Wing leveler

Using my newly acquired wing leveler to visit an old friend, Bob Lee. A poignant memory from a long time ago. http://krbuilder.org/Adventures/index.html See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2019/ KMVN/ Sept 26-28 People

Re: KR> 2019

Mt. Vernon? See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2019/ KMVN/ Sept 26-28 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior at 2013 - KR Gatheri

Re: KR> Plane Photos from Arrival day

I have always found in whether or not we do those things that we say we want to do, is simply a matter of priorities. And, this applies very much to whether or not we get our plane finished. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 20

Re: KR> Plane Photos from Arrival day

Who owns that plane? Looks really nice. Sure would rather be there than here, still building. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2018/ KMVN/ Sept 13-15 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best

Re: KR> Great Plains Aircraft?

Web site says it is available for some to take it over. GPASC.com My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Terence Teer via KRnet Sent: Monday, Septemb

Re: KR> Great Plains Aircraft?

Marty Roberts has or had it. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of tinyauto--- via KRnet Sent: Monday, September 3, 2018 1:35 PM To: krnet@list.krnet.

Re: KR> tail wheel

Here is how I did it and would not do it any other way nor would I use any other Vendor. I would use more laminates when building the spring, on the first go-round. http://krbuilder.org/MakingTailWheelSpring/index.html I am now building a different plane and using a same tail wheel from Av

Re: KR> Fixed Landing Gear Nvaero

nel at 2008 - KR Gathering in Mt. Vernon, Il - MVN Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Daniel Heath via KRnet Sent: Tuesday, July 31, 2018 7:24 PM To: 'KRnet' Cc: Daniel Heath Subject: Re: KR>

Re: KR> Fixed Landing Gear Nvaero

The last information I have on NVaero is that they are no longer in business. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2018/ KMVN/ Sept 13-15 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gath

KR> KR Gathering

This looks like a great place for a KR Gathering. https://generalaviationnews.com/2018/07/19/wautoma-airport-waypoint-to-oshko sh/?utm_source=ActiveCampaign

Re: KR> Gear legs - G loading

YOU MAY Be able to use this: http://krbuilder.org/WeightAndBalance/WB_Documents.html Scroll down. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Rllanning v

Re: KR> Progress

Lookin good Mark. When I sold my first one, I also regretted it, big time. But you are right, I think if a person had time to build 3, they might actually get it right, in their eyes. My Panther Building Documentation at PantherBuilder Web Site Daniel R. H

Re: KR> Airplane Plastics

Jeff, Looks like good stuff. I could not find Joe. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- https://www.airplaneplastics.com/ --- In

Re: KR> New KR2S

Congratulations, looks really nice and I hope to get to the gathering this year to see it in person. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2018/ KMVN/ Sept 13-15 Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Be

Re: KR> yesterdays flight.

Screwed up landing? Seems to me that you did all the right things other than failing to check the wind sock. Pat yourself on the back. Great story. See N64KR at http://KRBuilder.org - Then click on the pics KRGathering 2018/ KMVN/ Sept 13-15 Peoples Choice a

KR> Found it. Piano Hinge undersized pins

Expensive is not the word for it, but if you need it, check it out. I got it from supp...@homebuilthelp.com https://www.mcmaster.com/#ptfe-coated-wire/=1a5xl4b My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC

KR> Hinge pins

Anybody know where you can get undersized hinge pins. I want to use pins to attach cowling where possible and undersized work better where there are curved surfaces being joined. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath -

Re: KR> Procedure

There are several documents at: http://krbuilder.org/WeightAndBalance/WB_Documents.html You are welcome to use any that suit your purpose as long as you assume responsibility for your final product. See N64KR at http://KRBuilder.org - Then click on the pics

Re: KR> Aileron Counter balance

Certainly this may not add much to the conversation and Mark's comments. But in the interest of sharing, this is how I built mine. I probably hit 180 MPH a few times in a dive, but my usual flying speed was around 155MPH. The aileron balance stuff is about 3/4 down the thumbnail list. Sorry,

Re: KR> Aircraft inspection Canada

Saw the fireworks from New Zealand on the news this morning. Happy New Year to all our friends down under. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list

Re: KR> fuel flow meter

I have a Red Cube. I used it on my Dynon system. Not sure what they sell for, but if anyone is interested, I will settle on a price. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- Subject: KR> fuel flow meter I recall

Re: KR> aileron balancing

Check out near of the bottom of the thumbnails on this page: http://krbuilder.org/Aileron/index.html See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR Gathering – KLXT Lee’s Summit, Missouri Peoples Choice at 2013 - KR Gathering in Mt.

Re: KR> BasicMed - it's easier than you think!

I also had a NON EVENT basic med. One of our EAA groups set up a doctor and a date for anyone to come get the Basic Med. I did the paperwork and took it to the location. I went right in, as they were right on schedule. 10 minutes later, I walked out with my Basic Med. I have the color issue an

KR> For Sale

Airspeed has been sold. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC ___ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see

KR> Steam Gauges For Sale

http://pantherbuilder.org/for-sale/ Mail me at da...@windstream.net if interested. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC ___ Search the KRnet Archives at

KR> KR too small?

I have a friend who built a KR1 to fit himself. He is 6'10". My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of tinyauto--- via KRnet Sent: Sunday, November 5, 201

Re: KR> 2017 KR Gathering...Thanks

I have a friend who has a partially complete KR1 for sale. If anyone is interested, let me know and I will get you in touch with him. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- We need some KR-1's also!

KR> KR Gathering Location

All this talk about the KR Gathering, makes me wish that my third airplane was going to be another KR. This is not so much that it is a great little airplane, but that it has a long tradition of family that comes with it. I hope that when I finish this new airplane, that I will make many more

Re: KR> Seat Pans

Sure, look here for how I built mine. http://krbuilder.org/seats/index.html See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR Gathering - KLXT Lee's Summit, Missouri Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best K

Re: KR> Tail versus nose dragger

Hennie, I am curious about the previous plane you were building. It seems that it was a long time ago and I had thought that you had finished it. To answer your questions. Yes, on the KR, I do believe that the nose wheel induces significant drag (opinion without fact), and No, I would NEV

Re: KR> progress finally

WOW, I think you went to the Continental store and bought a new one, you can't fool me. See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR Gathering - KLXT Lee's Summit, Missouri Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN B

krnet@list.krnet.org

Several of us in our EAA Chapter went in and bought a set of real scales. We share them among the investors and charge a $50 for others in the chapter. The money goes into the chapter bank account. See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR

Re: KR> Dynon Duel Band ADS-B

Jeff, Any reason to upgrade from my current Dynon ADSB in/out with Mode S XPDR? My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of Jeff Scott via KRnet Sent: Frida

Re: KR> OneDrive pics

It is requiring a password? Daniel R. Heath - Lexington, SC -Original Message- Okay, I have the pics in OneDrive , here is the link. Hopefully this will work for all. https://onedrive.live.com/?id=31FB47F180802952%21510&cid=31FB47F180802952 __

KR> Instrumentation on your Tablet

https://www.youtube.com/watch?v=5EyxTI8fL34 Very neat for a small price. My Panther Building Documentation at PantherBuilder Web Site Daniel R. Heath - Lexington, SC ___ Search the KRnet Archives at https://ww

Re: KR> 4-into-1 exhaust system help?

Have you checked with Revmaster? See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR Gathering – KLXT Lee’s Summit, Missouri Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il – MVN Best Interior at 2013 - KR Gatherin

Re: KR> New Years day flight

Sorry, the thing about email is that you need to read it FIFO and it presented as LIFO, so I did not see the flight report first. My bad. Thanks. As I continue to build, I long to fly. See N64KR at http://KRBuilder.org - Then click on the pics 2017 KR Ga

Re: KR> New Years day flight

Happy New Year, now tell us about the flight. Daniel R. Heath - Lexington, SC -Original Message- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of bjoenunley via KRnet Sent: Monday, January 2, 2017 12:45 AM To: KRnet Cc: bjoenunley Subject: Re: KR> New Years day flight