.
Victor
On Jul 21, 2022, at 16:27, Harold Wagenknecht via KRnet
wrote:
When I was started to take my first glider lesson…. I weighted about 130 lbs
and before each flight I had to install a 25 lbs “lead cushion” under the seat
of our trusting ASK13 to bring the cg into an acceptable range.
Years
When I was started to take my first glider lesson…. I weighted about 130 lbs
and before each flight I had to install a 25 lbs “lead cushion” under the seat
of our trusting ASK13 to bring the cg into an acceptable range.
Years later I didn’t head my own advise and flew another glider with an aft
https://youtu.be/qhJ1tVTtfPw
link didn't like the
On Sat, 1/13/18, Harold Wagenknecht via KRnet wrote:
Subject: Re: KR> KR-2 Flutter
To: "KRnet"
Cc: "Harold Wagenknecht" , laser...@juno.com
Date: Saturda
https://youtu.be/qhJ1tVTtfPw actual flutter test of a sailplane.
Sent from my iPhone
> On Jan 12, 2018, at 11:20 PM, Mike Stirewalt via KRnet
> wrote:
>
> Holy Cow . . . what a thing to happen, and what a great description.
>
> I wonder if the top of the wing can come off like that with
Doran,
I will call you tomorrow Stay away from wankels Very hot exhaust
Loud Sealing issues.
Sent from my iPhone
> On Aug 25, 2016, at 2:40 PM, Doran Jaffas via KRnet
> wrote:
>
> Has there been a successful installation of a Wankel rotary in a KR2? I
> have a chance to pick
http://kr2seafury.com/resources/1988_01_05.pdf
Here is one.
Regards,
Harold
--- On Sun, 7/1/12, Brian and Sue Deveson wrote:
From: Brian and Sue Deveson
Subject: Re: KR> Structural Analysis
To: "KRnet"
List-Post: krnet@list.krnet.org
Date: Sunday, July 1, 2012, 7:07 AM
Hi guys,
So wi
You cannot just call it a Motorglider as tempting as it might be there is a
definition out there regarding what qualifies... the more stringent being "the
maximum weight to wing span squared can not exceed 3.0 kg/m2 (0.62 lb./ft2)".
All details are outlined in Advisory Circular 21.17-2A.
No
The 4 in 1 exhaust system from Great Plains works if the exhaust flange on
cylinder 2/4 are moved (i.e. straight pipe section cut off) by about 3 inches.
I use the Great Plains tri-gear engine mount. In addition, my engine is moved
forward via spacers by about 2 inches as well.
Harold
Scot
I sell compressed air systems for a living and there is only one way to get rid
of water, which is installing a compressed air dryer. It works like a
refrigerator as it cools the air down to 38 degrees and vapor turns into
condensate (water) and is removed. Now the air has to cool down to 38 bef
Yes, there were quite a few analysis done on the KR and references and part
excerpts can be found in the KR newsletter. I also know that the plans in the
past have been slightly updated to reflect the "weak" points (as found in the
analysis) in the design, which were a reinforced web structure a
10 matches
Mail list logo
