KRnetters,
I will be printing the name tags next week for the Gathering. I have to
do it this early because of taking a trip between now and the
KRGathering. If you want your very own personalized, pre-printed,
*valuable (a relative term), commemorative name tag just Pre-register
this week a
Is this a written regulation or a bureaucrat making up his own
rules? Or can you just follow what is suggested in FAA Advisory
Circular 90-89A ? I have not been able to find any requirements.
Rich Hartwig
Re: "My FAA inspector stated that I had to have a satisfactory flight
test plan for
Trim!!! No...not as in airplane, but in your messages. We are getting
a lot of one sentence posts followed by 40 lines of repeated garbage.
It only takes a couple of seconds to highlight the un-needed repeats and
delete them before sending your post to the list. It is a KRnet rule
and makes
Please be sure to pre-register within the next two days..that
is...if you want to proudly wear a personalized name tag at the
gathering. I will be making tags using the names that are registered by
Aug 30. Hoping to see you at MVN!!!
Rich Hartwig
Waunakee WI
"However, the percentage of deaths per mile driven happening because of
vehicle accidents has remained fairly constant over the years."
Todd, the automobile safety guy who gave you this information was way
off base. Deaths per mile driven have decreased greatly over the years
and the trend cont
A router with a trammel base and using a 1/4 inch bit will cut perfect
holes of any size quickly in aluminum. You can buy a trammel base or
make an acrylic base for the router and drill a 1/8 inch pivot hole in
the base at the proper radius. A trim router is a perfect size to use
and you can
Please...please...trim the message you are responding to so that we
don't have to keep scrolling through the repeated messages. If you
don't know how or don't know what I'm talking about I'm sure someone on
the list will give you tech supportand...uh...let's talk about
airplanes.
Dick Hart
Joe wrote:
"I may have in the past gave it a shot of WD-40 thinking that it was
good for it."
Joe,
You are correct in considering that the WD-40 used in your throttle
cable could possibly be the problem. WD-40 was originally designed to
prevent surface corrosion, but also has limited use as a
Enough repeats of all the Hoover messages.Please trim messages you are
replying to.
Rich Hartwig
Waunakee WI
Joe,
For information concerning cracking of HAPI flywheels, check the archives at:
http://www.maddyhome.com/krsrch/search
and search "HAPI flywheels"
Rich Hartwig
Waunakee WI
Joe,
For information concerning cracking of HAPI flywheels, check the archives at:
http://www.maddyhome.com/krsrch/search
and search "HAPI flywheels"
Rich Hartwig
Waunakee WI
A few years ago Mark L had a link on his website about quick detach wing
fittings from a builder in the UK. The link was from Willie Wilson and I
believe the builder was a K. Atkinson on his KR2 G-BVIA. The link no longer
works, but maybe someone has a copy of it. The system looked simple eno
A few years ago Mark L had a link on his website about quick detach wing
fittings from a builder in the UK. The link was from Willie Wilson and I
believe the builder was a K. Atkinson on his KR2 G-BVIA. The link no longer
works, but maybe someone has a copy of it. The system looked simple eno
Edward,
You may be able to find 1088 spec. marine plywood locally.
Rich Hartwig
Waunakee WI
Larry,
Maybe Old Blue can't be resurrected, but I bet she could inspire another
Flesner song.
Rich Hartwig
Waunakee WI
Dan,
When I read your first post about the tail wheel it was quite clear to me that
you were not blaming the tail wheel setup for the accident..and I admire
you for not responding in anger to some of the caustic comments. Thanks for
getting the tail wheel discussion started. We have not ha
My five digit membership number attests to the fact that I have been an EAA
member since about 1974. Do I like everything about itNo! Am I happy to
be a member..Yes! I really enjoyed the laid back atmosphere of "Oshkosh"
during the early years, but still heard some complain that "It's
If you registered for the Gathering before this month, you may have to register
again. Check the pre registration page at krgathering.org
So far only 12 people are listed. It would be a shame if you arrived at the
Gathering and your new hat and shirt weren't there.
Rich Hartwig
Waunakee WI
Here is the question and answer directly from the EAA's website:
EAA Young Eagle Pilot Guidelines.
"Can I fly in my licensed "Experimental" aircraft? Yes. All aircraft are
eligible provided they are properly licensed and flown in accordance with
appropriate FARs (or the country's equivalent) and
Sid,
What formulas or table did you use for calculating the change in flight
characteristics for a rectangular planform wing? The 20% figures you state
seem a little extreme. Also, I think the change would add only about 7 Sq ft
to the wing area.
Rich Hartwig
Waunakee WI
>about 20 percent t
Benjamin F. Copeland IV wrote:
"Dennis has done the greatest thing on adding a starter and alternator to the
C-65 engine in his KR2. "
Here's a link to Dennis Dyer's site: http://www.mtnguy.com/kr2/
Rich Hartwig
Waunakee WI
>"Hi there learned builders, what say you about hingeless ailerons?
>The hinge is replaced with a flex-plate made of 0.016" 6061-T6"
Paul,
What would be gained by using the aluminum flex plate instead of a hinge?
Cheaper? The hinge on the Zenith is part of the skin and simplifies the
structure
I don't think you will find technical data from glue manufacturers that
recommends "roughing up" a surface to be glued. A smooth freshly planed or
sawn surface is best. Roughing increases the thickness of the glue line and
that is generally not a good idea. Lightly scuffing plywood with sandp
23 matches
Mail list logo