Hello all,
Does anyone have experience with using epoxy to attach wood and aluminum parts
together ?. or is there a better glue to bond wood and aluminum ?. or a special
treatment for the aluminum ?
Thanks
Bobby Burington
California KR Builder
with a coarse
sand paper and use structural adhesive such as Hysol or Aeropoxy (much less
expensive).
Hope this helped
Solly Melyon-Mgr
AeroMax Aviation, LLC
www.aeromaxaviation.com
229.241.1175
--- On Sun, 11/2/08, bobby burington wrote:
From: bobby burington
Subject: KR> Epoxy and alumi
Solly Melyon wrote:
> There is a certain chemical that you apply with a brush on the aluminum to
> create a bonding surface to the glass or wood. I do not have the info on
> it. ML could know.
There are chemical conversion coatings such as DuPont 225S that clean and
prepare surfaces for paint
>
> Does anyone have experience with using epoxy to attach wood and aluminum
> parts together ?.
I have tested and used T88 to bond aluminum to wood. The only preparation I
give the aluminum is to roughen up the surface with sand paper and then
clean with acetone to remove the dust. I used it
: Darren Crompton
To: bobbycrea...@yahoo.com; KRnet
Sent: Sun, 2 Nov 2008 7:39 pm
Subject: Re: KR> Epoxy and aluminum
>
> Does anyone have experience with using epoxy to attach wood and
aluminum
> parts together ?.
I have tested and used T88 to bond aluminum to wood. The only
p
Hey Mark do you have any props in the bank?
At 06:39 PM 11/2/2008, you wrote:
> > Does anyone have experience with using epoxy to attach wood and aluminum
> > parts together ?.
When I bonded aluminum or stainless steel strips to wood or fiberglass, as
around the inside of inspecti
7 matches
Mail list logo