KR> Gussets

Gussets, gussets, gussets I'm starting to really hate gussets. I know it is a necessary evil but I for one will be glad to finish with them and get to working on something that really looks like progress. On the up side of things the fuselage is starting to look really good. I am planning on

KR> Gussets

...@mylist.net] On Behalf Of jg7...@mindspring.com Sent: Thursday, December 07, 2006 9:15 AM To: KRnet Subject: KR> Gussets Gussets, gussets, gussets I'm starting to really hate gussets. I know it is a necessary evil but I for one will be glad to finish with them and get to working on something that rea

KR> Gussets

Get 4130 cut to width, Drill and shape, Virg On Thu, 7 Dec 2006 09:14:30 -0500 "jg7...@mindspring.com" writes: > > > Gussets, gussets, gussets I'm starting to really hate gussets. I > know it is a necessary evil but I for one will be glad to finish > with them

KR> gussets

..@mylist.net> Sent: Saturday, May 06, 2006 12:40 AM Subject: Re: KR> gussets > At 09:25 AM 5/4/2006, you wrote: >> Some time ago I listed a posting on fitting cross members with >> gussets already fitted, and somebody replied saying that the >> curvature of th

KR> gussets

Some time ago I listed a posting on fitting cross members with gussets already fitted, and somebody replied saying that the curvature of the side frame would pose a problem, I did mean to reply but have been lost with other activities of late, and I know, its a subject which has been

KR> gussets

At 09:25 AM 5/4/2006, you wrote: > Some time ago I listed a posting on fitting cross members with > gussets already fitted, and somebody replied saying that the > curvature of the side frame would pose a problem, > I really think the core of the problem is being missed, being > that the

KR> gussets....

HI, I have a question... does it matter which way the grain of the gussets are going? I just took a piece of my 5/8 spruce stock and started cutting at 90 and 45 degree angles... is this exceptable? David Swanson

KR> gussets....

- From: <bdazzca...@aol.com> To: <kr...@mylist.net> Sent: Wednesday, February 08, 2006 11:09 PM Subject: KR> gussets > HI, > >I have a question... does it matter which way the grain of the gussets > are going? I just took a piece of my 5/8 spruce stock and sta

KR> gussets

David, What you are doing is reinforcing the structure. Have the grain orientation match if possible. If you have glued some with the wrong grain, mark them with magic marker, leave them until you have covered the sides and then put a plywood stiffener over the intersection. Don't go back and

KR> gussets....

Richmond Australia. - Original Message - From: <bdazzca...@aol.com> To: <kr...@mylist.net> Sent: Thursday, February 09, 2006 4:09 PM Subject: KR> gussets > HI, > > I have a question... does it matter which way the grain of the

KR> gussets....

Grain should run along the diagonal line, Virg On Thu, 9 Feb 2006 00:09:05 EST bdazzca...@aol.com writes: > HI, > >I have a question... does it matter which way the grain of > the gussets > are going? I just took a piece of my 5/8 spruce stock and started > cutting at > 90

KR>gussets

Here is what I did! Get some kids Play Dough, put a piece of wax paper where the gusset is going to be, squeez the Play Dough in that spot and remove carefully and, voila, you wil have a perfect three dimensions model. Regards, Louis Staalberg n...@cybertrails.com Payson, Arizona,USA 34-11.729 N

KR>gussets

When I was cutting all the gussets for the fuselage I used a trick that someone told me about and it worked very well. Whether the gusset has a single angle or compound angle you really don't care what that angle is, you just want to duplicate it on whatever you are using to cut , sand, etc.

KR>gussets

Man, I love KRnet. Why? Because of the bits of information and helpful tips that can be glean from this site. This is a good example. Thanks Larry In a message dated 6/2/2003 8:56:32 PM Central Standard Time, fles...@midwest.net writes: > Take an old hacksaw blade and brake a section off each

KR>gussets

ether it had the gussets in place. Justin - Original Message - From: <crk...@aol.com> To: <kr...@mylist.net> Sent: Monday, June 02, 2003 9:55 PM Subject: Re: KR>gussets > Man, I love KRnet. Why? Because of the bits of information and helpful tips > that can be glean from