I will be taking a Bendix D3000 recently overhauled by QAA in Tulsa Ok. This is
the mag only. If you need the cap, I have it and it's been drilled for an
automotive harness.
I will also have a Posa Carburetor and filter assembly for sale.
Starter switch with key A-510-3 (Off-R-L-Both Start)
Dy
1. KR2S nose gear bracket with caster assy and wheel with new tire. You'll
need to buy a new strut from NVAERO. I kinda broke the old one. $600
2. Ellison EFS-3A $900
3. Corvair engine is being rebuilt and reinstalled on N886MJ so that is no
longer for sale.
Can deliver to OSH or ship, yo
Today I visited John Sickafoose over at Sun n Fun at Lakeland. John is a
volunteer there. In his hanger he had a few KR2S parts.
Diehl wing skins for the RAF48 airfoil.
Complete spruce kit in box.
Complete plywood kit.
Rand WAF’s
All of these parts are NOS.
Contact John direct if you are inte
Joe,
What is 005.jpg
On Friday, March 4, 2016 9:26 AM, n357cj via KRnet
wrote:
=
Hey Guys,
I have been trying to get my act together to clean out some of my extras
but
I just don't seem to get organized. The first picture is a KR2s factory made
turtle deck with some cutti
Hey Guys,
I have been trying to get my act together to clean out some of my extras
but I just don't seem to get organized. The first picture is a KR2s factory
made turtle deck with some cutting done and some minor damage. I would have
used it but it seemed to be to much work to modify to fit
We have a VW type IV engine (complete except for the jugs and pistons) for sale.
Asking $600.00 but willing to talk!
Located near San Diego (El Cajon)
I have pictures and will send them to anyone interested
Bill Masquelier
On 3/9/2013 12:48 PM, Oscar Zuniga wrote:
> These buy/sell negotiations should probably be done privately. Not that
> there's a huge amount of traffic on the list though.
>
> The only thing about these buy/sell deals that may be of interest to the rest
> of us is if you arrange for a purchase
These buy/sell negotiations should probably be done privately. Not that
there's a huge amount of traffic on the list though.
The only thing about these buy/sell deals that may be of interest to the rest
of us is if you arrange for a purchase and want to see if someone on the list
might be com
.$200 +
Shipping ? = $
Marc Baca
665 S. Arizona Ave.
Los Angeles, California 90022
(323) 239-8436
From: Steve and Janet Henderson
To: krnet at list.krnet.org
Sent: Thu, March 7, 2013 8:01:19 PM
Subject: KR> KR Parts for Sale
Hello,
I h
I would take the rudder pedals, if you still have the m.
David Stowers
On Mar 7, 2013 10:01 PM, "Steve and Janet Henderson"
wrote:
> Hello,
>
> I have posted pictures and prices of the parts that I have for sale on a
> web page. You can see the web page here: https://sites.google.com/site/**
> kr
Hello,
I have posted pictures and prices of the parts that I have for sale on a
web page. You can see the web page here:
https://sites.google.com/site/krparts4sale/home
The wing attach fittings are not on the web page yet, but I am asking
$100 for them.
Thanks,
Steve
Hi,
Is it the standard KR tailwheel and spring you have?
Jamie
Sent from Samsung Galaxy NoteSteve and Janet Henderson
wrote:Hello,
I have not been on this list for a few years, but I am back to sell some
parts that I have. I will be posting a web page tomorrow with pictures
of what I hav
Hello,
I have not been on this list for a few years, but I am back to sell some
parts that I have. I will be posting a web page tomorrow with pictures
of what I have for sale, and I have included a list of some of the parts
for sale below. I have more parts in my shed, and will be getting more
If you went to http://jackskr2.webstarts.com/ to see the parts I have for sale
and can't read the bottom line the belly board, actuator and switch are $160. I
have tryed to adjust everything upward three times now and it still looks the
same.
Jack cooper
Chuckey TN.
KR and Corv air netters. I have listed a few more parts for sale at
http://jackskr2.webstarts.com/ . I have a
1. fuel manifold with electric primer and lines for a corvair engine and a
fuel pressure sender.
2. Aeroflash position and strobe double flash lig ht set.
3. Be
A local (Bainbridge, GA) friend asked if I would post this for KR builders
to see. He has decided not to complete this project. Please contact him
directly for info/photos, etc.
Ps: still working on my KR2, since starting in 1986. Flying an IFR equipped
Cardinal has really slowed me down..
Art
Toward the end of December, I posted a several messages regarding a slew of
parts for sale, and a snapfish link to view pictures. I still have the Dan
Diehl mains with obrien brakes and 5" azusa wheels, which are boxed and ready
to ship. I still have
the engines as well, but I've not had time
>From earlier posts, you'll find a listing of parts I'm selling. Add to that
>list a set of new fiberglass wingtips in their original box. you can have
>these for the cost of shipping and handling, say $25.00
BTW, the Remaster 2100D comes with assembly manual as well. Included in the
manual
Parts for sale ? complete panel - I removed these parts myself, intact, from a
damaged KR2 which I bought as salvage. Instruments were all working at the
time of the aircraft retracts folded under upon landing, so they're
probably still OK.
The Alt and ASI have a Cessna nameplate on them. VS
Phil Visconti is selling his KR parts. You can reach him at:
pjvis...@juno.com
KR2 Items for Sale
1. Revmaster 2100D Engine : Zero Hours
2. Revmaster Engine Mount
3. Quickie 2 Wood Prop: 56 in Dia 45 deg Pitch
4. Spinner
5. Cowling
6. Boat Stage plus builder's log
7. Wing Spa
Good Evening:
I'm cleaning out the garage and I'm selling the KR parts that are no longer
applicable to my project. I've swapped over to Corvair power, so the VW
motor mount is no longer required. The retracts are gone, so the fairings
and the mold for the fairings are available. Additionally, I h
Mike:
Sell me the vents
Jim
-Original Message-
From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf
Of Peg and Mike
Sent: Sunday, November 06, 2005 10:57 PM
To: kr...@mylist.net
Subject: KR> Parts for Sale
Good Evening:
I'm cleaning out the garage
Hello all.
Thanks for all the letters and inquiries I have had. I think I got back
with everyone who contacted me off-line, but if I didn't, I apologize.
I finally got done with a brief catalog of what is on the project,
excluding the little stuff. I posted it here, along with photos. Does
Hi Everyone, Its beeen ages since I posted on the list. Circumstances
force me to sell this great stuff. I have a set of TET gear leg
brackets(never
mounted), Diehl gear legs(never drilled or mounted), Terra TRT 250
transponder(yellow tagged), Narco Escort 2 Nav/Com( fits in insturment
To: kr...@mylist.net
Subject: KR> parts for sale
Hi Everyone, Its beeen ages since I posted on the list. Circumstances
force me to sell this great stuff. I have a set of TET gear leg
brackets(never
mounted), Diehl gear legs(never drilled or mounted), Terra TRT 250
transponder(yel
Hi Christian, I believe I have sold the transponder, But I have not
recieved the money yet, and ill put you second on the list if the buyer does
not
come through. It is a round face, for a 3 1/8 inst. hole.Thanks Jim
I have the following parts for sale:
Nose Gear with Nose Gear Wheel and Tire $280
KR2S Rudder Pedal Assembly $80
KR2S Tail Surface Hinges $75
KR2S Canopy Latches $15
Garmin GPS/Com Combination GPS Receiver and VHF Communications Transceiver
with with Universal Yoke Mount. Original price $9
Hey guys, I'm passing this along to anyone interested. I came across this
on Barnstormers.com.
I saw a pic of the completed airframe, it is sitting on top of a church.
Yes, a church.
EXPERIMENTAL KR-2S HOMEBUILT PARTS ONLY . $2,200 . PARTS FOR SALE . Here Is
a Great Opportunity to get Parts all
10, 2004 9:52 PM
Subject: KR> KR Parts For Sale
I have the following KR parts for sale:
Bendix TR-2061 Transponder w/altitude Reporter (used). Original cost $295;
asking $200.
I am located in Northern California about an hour north of Sacramento.
Email questions to
dougl
hello
How much on the A.C. case,bolts, flywheel, mtr mnt, alt, mag drive?
condition? Jim May
I have a bunch of parts that came off Don Betchan's KR2 that crashed in Rapid
City. They are all listed on ebay for a 3 day auction and some buy it now.
The parts are:
Diehl Accesory case
Acc. case bolts
engine mount
intake tubes
starter
Zenith Carb
Electronic Ign.
Flywheel
Prop Hub
Oil Breat
I have the following KR parts for sale:
KR2S Premolded Top Deck Package. Original cost $1935; asking $1400.
KR2S Premolded Cowling. Original cost $415; asking $250.
Rand Robinson Premolded Header Fuel Tank. Original cost $285; asking $180.
Vertical Card Compass. Original cost $189; asking
JW wrote:Hey Justin, Sorry to hear you are giving up. I
would be interested in your Corvair engine. I live in Cypress Ca. which I think
is right up the road from you. I am off tomorrow, tuesday. Give me a call at
work, leave me amessage with the receptionist if I'm not available, 714. 903.
3
To KR NET,
I have decided to give up building an airplane. I just cant possibly do
it with school,pilot training and a full-time job. Anyways I have:
Wing Spars complete (RAF48) done with perfection, full photo's of their
building.
A corvair that was partially torn down with only the front cove
Justin don't give up. I have been working on my Kr of an on for 20 years
It is good to work with your hands if you have a high pressure job. Your Kr
will never get jealous. You can hang it from the ceiling when you do not have
time for it and it will give you great insight into the the w
on the boat this would proubly be another story.
Justin
- Original Message -
From:
To:
Sent: Wednesday, June 16, 2004 6:27 PM
Subject: Re: KR> KR parts for sale
> Justin don't give up. I have been working on my Kr of an on for 20 years
> It is good to work with your hands
Auburn, Alabama
scrounging parts
>
> From: "Brian Kraut"
> Date: 2004/04/26 Mon AM 02:14:02 GMT
> To: "KRnet"
> Subject: KR> parts for sale
>
> The project I just bought has the RR tail wheel and two (don't ask me why)
> tail wheel springs t
rom: "Brian Kraut"
>> Date: 2004/04/26 Mon AM 02:14:02 GMT
>> To: "KRnet"
>> Subject: KR> parts for sale
>>
>> The project I just bought has the RR tail wheel and two (don't ask me why)
>> tail wheel springs that I am not going to use
Sorry, didn't mean to sent that to the whole list.
-- Original Message --
From: "Brian Kraut"
Reply-To: brian.kr...@engalt.com, KRnet
List-Post: krnet@list.krnet.org
Date: Mon, 26 Apr 2004 09:05:48 -0400
>Sorry, I have been pretty busy and have not got b
The project I just bought has the RR tail wheel and two (don't ask me why)
tail wheel springs that I am not going to use. Rand lists the spring at $25
and the tail wheel at $65. I will sell the springs for $20 each and the
tail wheel for $55 and ship it FedEx ground for free. I will split the
pa
LARRY
DO YOU STILL HAVE PARTS FOR SALE?
DAVE
--- Larry A Capps wrote:
> KR Parts For Sale - pictures available
>
> - HAPI 1835cc dual ignition engine w/ Starter (2
> hrs run time) $1,800
>
> - Exhaust system $100
>
> - Two props. (climb and cruise) $150
>
-
From: "David Hartz"
To: ; "KR builders and pilots"
Sent: Wednesday, July 23, 2003 5:44 AM
Subject: Re: KR>KR Parts For Sale
> LARRY
> DO YOU STILL HAVE PARTS FOR SALE?
> DAVE
> --- Larry A Capps wrote:
> > KR Parts For Sale - pictures available
>
No thanks. I was wanting the gear myself.
Justin
N116JW
www.geocities.com/attngrabber14/Home
- Original Message -
From: "Timothy Bellville"
To: "KR builders and pilots"
Sent: Thursday, July 24, 2003 4:02 AM
Subject: Re: KR>KR Parts For Sale
> HI David,
>
KR Parts For Sale - pictures available
- HAPI 1835cc dual ignition engine w/ Starter (2 hrs run time) $1,800
- Exhaust system $100
- Two props. (climb and cruise) $150
- Fixed Landing Gear w/ 500 tires and hydraulic breaks $100
- Posa Carb. and spinner $75
- Stainless steel
I am interested in the props and landing gear, could you send me some
pictures and maybe a better description?
Thanks
Tim Bellville
KR2
n7038V
- Original Message -
From: "Larry A Capps"
To: "KR Builders List (E-mail)"
Sent: Tuesday, July 08, 2003 7:58 PM
Subject:
BRS Chute, Diehl Gear W/Cleveland Brakes,Hydraulics,Wheels,Tires..New, Unused..
Switched To Glastar Project Unreasonable Offers Considered
E-mail xzos...@msn.com
Bill Huntley Green Bay, WI
46 matches
Mail list logo
