Woh, now there's something I missed. In all my perusing of the plans and
the build guide I hadn't noticed the floor extending back past the main
spar. I'm at the point of fitting my centre section spars so I'm glad this
came up. KRNet saves the day - again!
Cheers,
Tony
On 13 January 2014
I extended the 3/32" plywood floor to the back side of the station "E"
crosspiece at the aft side of the spar cutout. As for the 1/4" ply, I
considered it as part of the load structure for the lower engine mount and left
it in although I am also planning on hanging my rudder pedals / brakes
Larry Flesner wrote:
> add another 5/8" cross member at that point to support the floor.
Sorry, but I'll have to throw the "unnecessary beefing" flag on that one
Thanks Mark and Larry. Another question. Do you think the 1/4 plywood under
your feet is structural or a foot rest. That's a lot a
At 09:21 PM 1/12/2014, you wrote:
>Ok, I'm talking about the floor inside the cockpit. The wood that
>goes on top of the soundproofing / insulation foam. The
>drawing shows the floor to go all the way back to the front of the
>spar. there is nothing to glue the floor to front of the spar.
Paul Visk wrote:
>> Ok, I'm talking about the floor inside the cockpit. The wood that goes on
>> top of the soundproofing / insulation foam. The drawing shows the
>> floor to go all the way back to the front of the spar. there is nothing
>> to glue the floor to front of the spar. <<
That
Ok, I'm talking about the floor inside the cockpit. The wood that goes on top
of the soundproofing / insulation foam. The drawing shows the floor to go
all the way back to the front of the spar. there is nothing to glue the floor
to front of the spar.
Paul Visk
Belleville Il
618-406-4705
Paul Visk wrote:
>> Fwd of the spar there is no 5/32 cross member for the back edge of the
>> 3/32 plywood to sit on. I thinking when I step into the plane the back
>> edge will collapse. I double check the drawings to see if I miss the
>> crossmember and I didn't. <<
Do you mean 5/8"
At 07:15 PM 1/12/2014, you wrote:
>I cut my holes for my front spar today and notice when I put the
>plywood floor in. The back edge has nothing to glue. Any suggestions. Paul Visk
+++
not sure I follow what
I cut my holes for my front spar today and notice when I put the plywood floor
in. The back edge has nothing to glue. Any suggestions.
Paul Visk
Belleville Il
618-406-4705
Sent from my HTC on the Now Network from Sprint!
9 matches
Mail list logo
