At 05:25 PM 6/12/2015, you wrote:
>I thought that also...what could it hurt? But several times I've
>wished I hadn't done that, so I could remove the WAF for some reason
>or another...
I'
Larry Flesner wrote:
> It wouldn't hurt to epoxy the fitting to wood contact surfaces also
as they are installed.<
I thought that also...what could it hurt? But several times I've wished
I hadn't done that, so I could remove the WAF for some reason or
another...mounting the wing tanks was one
At 11:31 AM 6/12/2015, you wrote:
>A couple of other builders were looking
>at what I was doing and both recommended that I use a marine varnish on the
>bolts before I put them through the spars
+++
I'm with Mark on this one. Use epoxy. I'd
Ray Fuenzalida wrote:
A couple of other builders were looking
> at what I was doing and both recommended that I use a marine varnish
on the
> bolts before I put them through the spars. If not, they said that the AN
> bolts would delaminate and rot the wood spars from the inside.
I think the
hello all,
Just a quick question. I am redoing the waf's on the wings I have (got
beautiful ones from Dan - thanks Dan) and I have a question about the
fittings and bolts. I am going to go ahead and do it because it makes
sense but I hadn't heard anyone mention it before. Of course I am priming
a
5 matches
Mail list logo
