Hello netters,
I bought a KR2, and do not have plans with the plane. The cables to the
elevator is very different in tension from the ailerons, so much so that I can
get manual flutter at the elevator when fully deflected up. I bought a cable
tension gauge, but do not have the plans to know
You should have a turnbuckle on each cable. If you don't, insert one on
each. Tighten them to "tight". You need to be sure not to tighten one more
than the other, because that will effectively make one shorter than the
other and you will notice a binding as you operate the elevator.
Your
Colin,
Is the belcrank spacing the same on both ends? If one arm is longer than the
other it could cause a loose cable condition. My guess is; check the control
stops and be sure they are adjusted properly. Lynn N37LH
Colin Wrote
I bought a KR2, and do not have plans with the plane. The
Plans are cheap insurance that Everything Has been done correctly
and that what You do is correct. Buy a set, Virg
On Thu, 17 Apr 2003 23:57:22 -0400 "Colin" writes:
> Hello netters,
> I bought a KR2, and do not have plans with the plane. The cables to
> the
4 matches
Mail list logo