To All,
I've been asked to assist in the repair of what appears to be a KR
derivitive. The center section of the box-type front spar is fabricated in the
typical
KR method of upper & lower booms faced with ply shear webs. Wing is fiberglas
over foam. The plane is not new and has accumulated
Bob Hoover wrote:
> Question: Is 1-1/2" the normal thickness for these booms?
The KR main spar caps for the center section are usually 2" thick (top to
bottom) and 2-5/32" wide with vertical spacer blocks every 7-9", faced with
3/32" plywood. The whole thing is about 7.2" tall. The outboard wi
veedu...@aol.com
Sent: Monday, October 13, 2003 4:49 PM
To: kr...@mylist.net
Subject: KR>Spar dimensions, help needed
To All,
I've been asked to assist in the repair of what appears to be a KR
derivitive. The center section of the box-type front spar is fabricated in
the typical
KR method of upper
ginal Message -
From:
To:
Sent: Monday, October 13, 2003 1:48 PM
Subject: KR>Spar dimensions, help needed
> To All,
>
> I've been asked to assist in the repair of what appears to be a KR
> derivitive. The center section of the box-type front spar is fabricated in
the typ
In a message dated 10/13/03 3:22:29 PM Pacific Daylight Time,
wa...@hispeedwireless.com writes:
> Does anyone realise that bob hoover is on the krnet?
---
Dear Wayne,
You may have me confused with the real Bob Hoover. He's the world's b
Sorry I guess I just got all afire and jumped without looking close.But just
so you know I'm telling my wife that I talked to Bob Hoover today.
Thanks
Wayne
- Original Message -
From:
To:
Sent: Monday, October 13, 2003 3:48 PM
Subject: Re: KR>Spar dimensions, help needed
> I
Bob Hoover wrote:
> You may have me confused with the real Bob Hoover. He's the world's best
> pilot. I'm a part-time mechanic.
Don't let him fool you with that modesty. He's THE Bob Hoover in my book...
the guy that's done more for the total understanding of VW engines than any
other person o
Mark Langford
To: KR builders and pilots
Sent: Monday, October 13, 2003 4:41 PM
Subject: Re: KR>Spar dimensions, help needed
> Bob Hoover wrote:
>
> > You may have me confused with the real Bob Hoover. He's the world's
best
> > pilot. I'm a part-time mecha
209-609-8774
skyguy...@skyguynca.com
www.skyguynca.com
- Original Message -
From:
To:
Sent: Monday, October 13, 2003 3:48 PM
Subject: Re: KR>Spar dimensions, help needed
> In a message dated 10/13/03 3:22:29 PM Pacific Daylight Time,
> wa...@hispeedwireless.com writes:
>
>
- Original Message -
From:
To:
Sent: Tuesday, October 14, 2003 4:48 AM
Subject: KR>Spar dimensions, help needed
> To All,
>
> I've been asked to assist in the repair of what appears to be a KR
> derivitive. The center section of the box-type front spar is fabri
10 matches
Mail list logo
