On Wednesday 10 September 2003 01:44, Damion de Soto wrote:
> Daniel Horth wrote:
> > Hi - I've been going through the LARTC how-to and have successfully used
> > the sample scripts (and wondershaper) with my xDSL links.
>
> Are you using the cbq or htb shaping scripts ?
>
> > I've been attempting
On Wednesday 10 September 2003 02:43, Dancer Vesperman wrote:
> No worries. Why does it work?
> Every packet leaving an interface is up to MTU bytes in length. Let's
> say that a byte is ten bits (8+ 1start+1stop). So a 1500byte packet is
> 15000 bits. On a 28.8K connection, that means a 1500 byte
Damion de Soto said:
> Daniel Horth wrote:
>> Hi - I've been going through the LARTC how-to and have successfully
used
>> the
>> sample scripts (and wondershaper) with my xDSL links.
> Are you using the cbq or htb shaping scripts ?
The cbq scripts...
>> I've been attempting to use the wondershape
esperman [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, 9 September 2003 6:37 PM
> To: Daniel Horth
> Subject: Re: [LARTC] newbie - shaping a PSTN connection
>
>
> I'd seriously advise cutting your MTU/MRU down. A lot. Say as low as 562
> or 168. If your MTU/MRU is defaul
Daniel Horth wrote:
Hi - I've been going through the LARTC how-to and have successfully used the
sample scripts (and wondershaper) with my xDSL links.
Are you using the cbq or htb shaping scripts ?
I've been attempting to use the wondershaper script with this PSTN
connection - but don't seem to be