At 08:50 AM 27/05/2004 -0700, Eric Scott wrote:
I used the VISA functions to perform serial communications with a device
connected to the FP-2000's serial port. Of course the vi had to be
downloaded to the FP unit (embedded). I've looked through MAX, but I don't
see anywhere to change the serial
the Serial Port settings on a FP-2000
At 09:38 AM 25/05/2004 -0700, you wrote:
These controllers use VISA (ie have VISA installed on them; you can see
this from MAX) so you can set the settings for the com port using the visa
method. I wasn't aware that you could use the normal serial port VI&
At 09:38 AM 25/05/2004 -0700, you wrote:
These controllers use VISA (ie have VISA installed on them; you can see
this from MAX) so you can set the settings for the com port using the visa
method. I wasn't aware that you could use the normal serial port VI's for
coms on these controllers anyway;
Good morning everyone..
Are the Fieldpoint FP-2000's serial port setings able to be changed? I tried seaching
through the archives and the user manual with no luck. I have also tried to use an
embedded "initialize serial port" vi with the desired settings but it doesn't take. I
have been sucess
