Hi there!
i´ve now managed to send the correct command to the ADC.. and the ADC
responses with 13B1#06 for example. But i still get the timeout errot - the
I/O assistant doesnt seem to recognize the answer from the device.
I´m using the command \1a0\r with the query and parse - command.
any idea
Hello!
Thanks for your response!
I´ve already read this thread, but the termination character doesnt seem to
be the problem...
I´ve tried usinf a COM-Spy who shows everything that is sent or received
from the com port.
When i try the program that came with the ADC, this string is sent:
#01a0 [
Hello newsgroup!
I´m a newbee reagrding labview, and want to get data from an ELV M232
A/D-Converter.
In the handbook of the converter the commands are listed...
Every command beginns with [SOH], and ends with [CR]. I´ve tried to use
LabView 7´s Instrumental I/O-Assistent, but i get an error wit
Hello Christoph,
"I=92ve now managed to send the correct command to the ADC.. and the ADC
responses with 13B1#06 for example. But i still get the timeout errot
- the
I/O assistant doesnt seem to recognize the answer from the device."
How are you getting the 13B1#06 response from your device? If
Hello Christoph,
Thank you for contacting National Instruments.
You might try the following link:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000800A9BC&ECategory=LabVIEW.LabVIEW+General
This is another discussion thread concerning an error