tim wen [EMAIL PROTECTED] said:
has anyone used a USB-to-mulitiport RS232 adaptor with LV ?
I've used IOnetworks' Edgeport devices with great success.
http://www.ionetworks.com/products/edgeport.html
The only real problem I had was that the USB connector going in to one of my Edgeports
was a
Subject: USB-serial
From: tim wen [EMAIL PROTECTED]
Date: Mon, 22 Mar 2004 17:20:11 -0800
Hi,
has anyone used a USB-to-mulitiport RS232 adaptor with LV ?
i need up to 8 serial ports, or 2 of 4-ports.
thanks.
Reply
I've used several types of USB-- serial, Qua tech and the UC232A dongles.
They can
Hi all,
Tim Wen asked on Mon, 22 Mar 2004 17:20:11 -0800:
has anyone used a USB-to-mulitiport RS232 adaptor with LV ?
i need up to 8 serial ports, or 2 of 4-ports.
I have used Keyspan adapters (1-port and 4-ports) on sevaral projects and
with several PCs with good success. Even had run two ECG
You can look in B-B electronics for this kind of thing. www.b-belect.com
-Original Message-
From: tim wen [mailto:[EMAIL PROTECTED]
Sent: Monday, March 22, 2004 8:20 PM
To: info labview
Subject: USB-serial
Hi,
has anyone used a USB-to-mulitiport RS232 adaptor with LV ?
i need up to 8
Hi,
has anyone used a USB-to-mulitiport RS232 adaptor with LV ?
i need up to 8 serial ports, or 2 of 4-ports.
thanks.
--
Timothy Wen
Applied Physic Lab/U of W
1013 NE 40th St., Seattle, WA 98105
206-543-1300 (Voice)/543-6785 (Fax)
1,It is not a NI USB-Serial Convertor.
2,Unplug USB-Serial Convertor Cause Computer dead.
I suspect that you will probably get similar behavior if you
disconnect the USB-Serial from within any application (like hyperterm
with the port open).
You will probably have to contact the manufacturer of your USB-Serial
convertor for support if the computer hangs (not just application
hangs
1, Windows Boot with USB-Serial converter Plug in,this serial port
does not work.In MAX-Devices And Interfaces, see a yellow ! mark on
that com port.
After plug out and Re-plug in the converter,this com port work.why?
2, When use normal com port run my labview program, when someone
unplug
A couple of questions and an answer:
1) Is this a NI USB-Serial convertor?
2) Are you unplugging the USB-Serial convertor or the serial cable
attached to it? If you remove the convertor you are yanking a COM
port out from under LabVIEW and this results in an unhappy
application. I do not know