Hi Jack
If you are interested in letting me know what is required ie software/disk
space, I have a colo system which is pretty under utilised and never comes
close to its monthly bandwidth allocation. It runs RedHat 6.1 at present
(due to some old database requirement), but is due for an update o
I have no errors that appear in the info prior to the logon.
I can use 'insmod' and load the network card drivers by hand off the CD,
then everything works. But I can't get them retained in a backup package or
on a reboot, they just won't load.
anything else I can try?
Thanks
- Original
What is the bot's name?
I can see now here in Portugal some 'episodes' of ComedyCentral's
Battlebots, and I'm curious to know which one is it...
-Original Message-
From: Charles Steinkuehler [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 14, 2001 2:22 PM
To: Peter Nosko; Leaf-User
> Awhile ago you posted something about Dachstein with PPPoE and you were
> looking for volunteers to try it.
> Where can I download a copy of it? Also it needs to be a floppy version
> since I do not have a cd burner.
The PPPoE packages seem to work. I have a production system I'm supporting
i
I concurr. I switched one of my ES2B boxes to RC5 last night and it is
great! Between the boot speed and the new IPSec version that starts in the
backgound and connections in parallel it is great.
My 1st reaction was to start changing the packages and burning a new CD so
it won't even need the
> pn] Hey Charles, what's the chance of me getting a miniature of your
battle
> 'bot in a happy meal? :)
Not very high at this time, since I've only been in one 'head-head' TV
match...not enough time or money to build a true "TV Calibar" 'bot...lots of
ideas, but they'd all take about a year wor
> I have no errors that appear in the info prior to the logon.
>
> I can use 'insmod' and load the network card drivers by hand off the CD,
> then everything works. But I can't get them retained in a backup package
or
> on a reboot, they just won't load.
>
> anything else I can try?
Verify your
It just occurred to me...
I like the "package library" the CD provides, but are there any packages on
there a bad guy could use against me if they got in? With the floppy option
if it was hacked a bad guy couldn't ftp to it, couldn't compile stuff on it,
so about all they could do is open and fo
> What is the bot's name?
>
> I can see now here in Portugal some 'episodes' of ComedyCentral's
> Battlebots, and I'm curious to know which one is it...
My most successful robot's name is "HammerHead". I was featured in a
head-head battle with "Rim-Tin-Tin" in the most recent season 3.0 of
Battl
> I like the "package library" the CD provides, but are there any packages
on
> there a bad guy could use against me if they got in? With the floppy
option
> if it was hacked a bad guy couldn't ftp to it, couldn't compile stuff on
it,
> so about all they could do is open and forward ports.
>
> Is
--- Charles Steinkuehler <[EMAIL PROTECTED]> wrote:
> I'm glad to here you were able to get it going. The new Dachstein CD is
> really much more friendly than the last version, and is intended for
> 'general consumption' as soon as more docs get written...anyone want to
> volunteer?
pn] I've bee
If you take the lead, I'd be happy to review/edit/test the docs.
I was iffy about leaving the tried and true 2 floppy boot config, but now
that I'm on the CD I love it.
Does anyone know of a way to create the CD from the CD-Contents under
Windoze? I suspect that will be the biggest challenge fo
> Does anyone know of a way to create the CD from the CD-Contents under
> Windoze? I suspect that will be the biggest challenge for a non-Linux
> person if they want to add/remove packages from the CD.
I've used Nero to create CD's on windows boxes. The version of Adaptec's
EZ-CD I've got doesn
Charles Steinkuehler wrote:
>
> > Does anyone know of a way to create the CD from the CD-Contents under
> > Windoze? I suspect that will be the biggest challenge for a non-Linux
> > person if they want to add/remove packages from the CD.
>
> I've used Nero to create CD's on windows boxes. The
All,
I need to set up a basic router (no NAT, DNS, filtering, etc.) with three ports to
three subnets and one port to our Internet gateway. My path to this end, was to start
with LRP Eiger, a default configuration and incrementally convert it to what I need.
The first step was to set it up w
> The basic method would be a DOS/Windoze program to edit/create the most
> standard options in config files rather then digging through network.conf
> and others to find the right lines to edit.
>
> The advanced method would be a web interface since the basics are there
from
> weblet already. Th
Please clarify two pieces of what you sent.
1. "My next step was to replace the internal address with x.x.153.254." What
did you actually do here? In particular, what netmasks are you using on the
two interfaces? With this change made, what does "netstat -nr" report about
the routing table?
2. "
Jeff Groetsema wrote:
>
> All,
>
> I need to set up a basic router (no NAT, DNS, filtering, etc.) with three ports to
>three subnets and one port to our Internet gateway. My path to this end, was to
>start with LRP Eiger, a default configuration and incrementally convert it to what I
>need.
Hi,
I have setup my router and first connected a Win98 machine to it. It's
configured to obtain it's IP dynamically. It always get's 192.168.1.1
Everything works great.
Now I got my laptop from work and also want to connect this to the router.
Plugged in my HUB and booted, but the problem this
Is Cyclades in trouble?
Sangoma says that they're having serious business problems.
We cannnot seem to get Cyclades on the telephone.
What do you think?
--
Best Regards,
mds
mds resource
888.250.3987
Dare to fix things before they break . . .
Our capacity for understanding is inversely p
> Look at ipconfig, the following
>
> IP-adres . . . . . . . . . . . : 192.168.1.2
> Subnetmasker . . . . . . . . . : 255.255.255.0
> Standaardgateway . . . . . . . : 192.168.1.254
>
> So the computer gets it's IP from the DHCP server and I can ping.
This is all good.
> What am I doing wrong? IE
I need to set up a basic router (no NAT, DNS, filtering, etc.) with three
ports to three subnets and one port to our Internet gateway. My path to
this end, was to start with LRP Eiger, a default configuration and
incrementally convert it to what I need. The first step was to set it up
with two p
> It sounds like you've got a connection to the internet. Are you
> sure you're
> internet explorer is configured correctly? The above looks like
> you may be
> trying to go through a proxy, which may exist at your office, but is
> certianly not on your home network. Make sure IE is set for 'd
Has someone out there created the latest version of PPPoE
from Roaring Penguin for the LRP EigerStein2BETA.exe image?
Are there instructions a Linux newbie could follow to create
it myself perhaps.
Thanks & Regards,
Kevin
___
Leaf-user mailing lis
Gosh. I hope they're alright. I use a couple of them in a production
web-store environment. If anyone hears anything, please post.
Thanks!
Chris Hackett
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Michael D.
Schleif
Sent: Wednesday, November 14, 2
Ray,
1. In the network.conf file, I changed eth1_IPADDR-192.168.1.254 to x.x.153.254.
eth1_MASKLEN= was left at 24 (appropriate for the address I'm using), same as eth0 and
eth1_BROADCAST= was set to x.x.153.255
netstat -nr reports the following
Kernel IP routing table
Destination Gatew
Matt,
I started with Dachstein, but could not get even the basics to work and so moved to
Eiger.
The firewall is not active.
IP addr show reports:
1: lo: mtu 3924 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope global lo
Currently we set up our routes and IP aliasing in init.d / network and
network config. They look like the following:
init.d /network configuration:
ip addr add 192.168.128.1/24 brd + dev eth2 label eth2 label eth2:extra_sub1
ip addr add 207.195.73.2/26 brd + dev eth2 label eth2 label eth2:extra_su
Charles,
Thanks for the reply.
I have set the IPFILTER_SWITCH=router and none, but still cannot ping past the router
from a laptop on eth1 (windows generates request timed out).
Jeff
>>> "Charles Steinkuehler" <[EMAIL PROTECTED]> 11/14/01 10:16AM >>>
I need to set up a basic router (no NAT, D
OK Jeff.
Your routing table looks OK (assuming your use of "x.x" hasn't concealed a
misconfiguration ... but that's obviously something you need to check
without help from here).
You say you *can* ping the laptop from the router and *both* router
interface addresses from the laptop. So the lapto
I have set the IPFILTER_SWITCH=router and none, but still cannot ping past
the router from a laptop on eth1 (windows generates request timed out).
CS> Questions:
Can the router ping the destination IP? If not, provide output of:
ip addr
ip route
ipchains -nvL
Is the default route on your
Sorry to jump in here, but your problem, heff, sounds more and more like a
routing problem at the other end (what I'll call the ISP end, though you
haven't actually told us what or where the gateway is) ... that is, that the
x.x.150.254 gateway does not know that x.x.150.253 is *its* route to netw
Charles,
Yes, the router can ping all destination IPs.
The default route on the laptop is set to the LEAF router (eth1 x.x.153.254)
I have done all pings by IP.
Thanks,
Jeff
>>> "Charles Steinkuehler" <[EMAIL PROTECTED]> 11/14/01 11:15AM >>>
I have set the IPFILTER_SWITCH=router and none, bu
> Well I just the settings that where set by the @home, @home doesn't use a
> proxy server, only a adres called http://proxy:8080 for an automated
> configuration script. But I turn those options off I still can browse the
> internet. And when IE gets started again, this option is 'checked' again
Kory:
Hello again. Quick suggestion:
> Kory Krofft wrote:
>
> All this talk about the weblet message logs has me wondering. My
> firewall log states that since yesterday I have almost 3000 denied or
> rejected packets. I included a sample of the log entries below. Can
> someone please e
Ray,
Here is the configuration I'm trying to work with.
Internet
_/
/
|Router|
|__|
|
| Campus
| Backbone
|Router|
|__|
_/
/ T1
|Router| x.x.150.254
|__|
Hello,
I've recently installed Dachstein RC2. Is this version able to masq an ipsec
type of VPN connection? Are there any special IPChains rules that I need to
enable?
I've confirmed that I can connect without the firewall, but cannot from the
inside. When I try to connect I can see port 500 bei
Hi,
I just ran a port scan from www.vulnerabilities.org an came up with
the following security warnings. I am using stock Dachstien CD rc5
with the following chains added to the end of ipfiter.conf.
# Router Call
$IPCH -I input -i eth0 -p 17 -s x.x.17.145 -j DENY
# Router Call
$IPCH -I input -i
This is a simple question, but one I've been
meaning to ask for a long time. When I make a change to network.conf (or
hosts.allow, etc), what command can I issue to reload my rules and/or interfaces
rather than reboot? BTW, I'm using dachstein cd
rc4.
Hi all,
I have had a shell script that I got from Charles a long time ago
running on my router. It beeps when the router comes up so I don't
have to have a monitor connected to know that the system is up. It
used to get backed up in etc but apparently etc does not back up
init.d anymore. So..
Your steps normally would work - except that @home uses a DLL to make the
proxy settings pseudo permanent (sure you can turn 'em off - and they'll
stay that way until you restart IE). I mentioned before that there is a way
to undo this - I just can't seem to remember how - it has something to
> This is a simple question, but one I've been meaning to ask for a long
time. When I make a change to network.conf (or hosts.allow, etc), what
command can I issue to reload my rules and/or interfaces rather than reboot?
BTW, I'm using dachstein cd rc4.
The command "net ipfilter reload" or "svi
Leaf-users.
Has anyone tried to include support for linux-wlan
in lrp/leaf floppies?
I own a Zoomair 4000 wireless pcmcia card which is
only supported by the drivers in http://www.linux-wlan.com
This means that the floppy needs PCMCIA support
also.
I have experience compiling kernels, drive
Hi again,
Got it working by now, just did a Internet Explorer Connection Wizard, and
for some reason now it works again.
Don't use the proxy script anymore, and IE still works.
Other thing: what should I do to make the laptop available to my both
networks (network at work, my own LRP networ
That's a part from Charles' site. I use them for Eigerstein floppy version.
###
HINTS & TIPS
###
Use /etc/init.d/network !!! Proper use of t
See response below.
At 01:21 PM 11/14/01 -0800, Jeff Groetsema wrote:
>Ray,
>
>Here is the configuration I'm trying to work with.
> Internet
> _/
>/
>
>|Router|
>|__|
> |
> | Campus
> | Backbone
>
>|Router|
>|_
Ahh. The @Home version of IE, I missed that. I didn't let @Home install it
on mine.
> -Original Message-
> From: Simon Bolduc [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, November 14, 2001 5:23 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED];
> [EMAIL PROTECTED]
> Subject: RE: [Leaf-user
Robert:
Heya. In general...an open port on your firewall is
not really a security problem *if* there's no service actually
listening to that port. So, is Dachstein actually running a
service that's listening to UDP port-9?
Secondly, AFAIK, the default firewall rules for
Dachstein
Hi Joris,
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Joris Kempen
> Sent: Thursday, 15 November 2001 08:51
> To: [EMAIL PROTECTED]
> Subject: Re: [Leaf-user] [leaf-user]Win2000 & LRP
>
>
> Hi again,
>
> Got it working by now, just did a Interne
Does anybody know how to set the backup MX for dyndns.org
using the newest version of ez-ipupd.lrp ? At least I got the
wildcard set now !
Doug
> > Does anyone has ez-ipupdate (3.0.11b5) packaged ?
> > I need a version which supports dyndns-custom, and it seems that the
> latest
> > lrp pac
Scott, Matt and Jeff,
Thannks for the replys to my questions about my firewall logs. Scott,
http://www.echogent.com/cgi-bin/fwlog.pl is really cool. It really helps
me to make sense of the log entries.
I see a fair number of the entries involving the code red worm. I was
not able to actually con
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Kory Krofft
> Sent: Thursday, 15 November 2001 13:42
> To: [EMAIL PROTECTED]
> Subject: [Leaf-user] Dachstein Firewall statu
>
>
> Scott, Matt and Jeff,
>
> Thannks for the replys to my questions abo
Hello, all -
I'm a router "newbie", even though I have a RedHat system up and running for
about a year. I would like any info on offloading my Dachstein logs to
another maching on my local net for storage. Any scripts available for
sending the logs to another box? Thanks a lot for any info here
I have had no luck with the Nortel Access Client working thru the Eiger
images. I just had to convince my firewall expert to make an IPSec
connection to the actual LRP box from the corporate firewall, but it helps
if you work in the IT dept.
I do have a friend that got his Nortel Access Client w
OK.this was definitely one of things you put on your list of "Stupid
Things I'll never do again".
My 1st problem was that I would burn the ISO and then copy it all to my hdd
and massage the packages back and forth on the CD-RW. Little did I know that
making an ISO image and just plain burnin
> In spite of the dire warnings on your site about the CD version not being
> appropriate for those without significant prior experience with
> Linux/leaf/LRP, I have tried it with great success within the past few
> days, on three different machines where I was running a 2-floppy setup.
I'm glad
Hey all,
In my upgrade to Dachstein CD RC5 I encountered some issues with Seawall
that may indicate an issue with sed/cut - or Seawall (I'm not sure which)
when Seawall starts I get a couple of errors:
sed: Unknown option to 's'
No IP Address assigned to eth0
sed: Unknown option to 's'
or s
> In my upgrade to Dachstein CD RC5 I encountered some issues with Seawall
> that may indicate an issue with sed/cut - or Seawall (I'm not sure which)
>
> when Seawall starts I get a couple of errors:
>
> sed: Unknown option to 's'
> No IP Address assigned to eth0
> sed: Unknown option to 's'
>
58 matches
Mail list logo