Joah
At 04:00 22.02.2004, joah moat wrote:
Okay, I have made some more progress with my Bering-uClibc2.1rc2 on notebook:
Good, but see below
I made an error in my report this morning: lsmod does return the use of
pcnet_cs.o module. (Darn, go figure I should prompt lsmod when the pcmcia
se
I have been very happy using the Dachstein-CD. I have configured 1
for broadband, and also 1 for dialup with an external modem. Now I am trying
to set one up using an internal modem, and I am not finding much help in the
documents or in the archive of the mailing list.
I am using a USR ISA
I've been pouring through the docs and archives but can't seem to find the
answer to these.
I've got a setup similar to Tom's 3 interface example, but with public IPs
in the DMZ and proxy arp set to allow access to them.
Question 1: If I want to firewall all but the necessary public services
fro
On Sunday 22 February 2004 09:15 am, Robert K Coffman Jr - Info From Data
Corporation wrote:
> I've been pouring through the docs and archives but can't seem to find the
> answer to these.
>
> I've got a setup similar to Tom's 3 interface example, but with public IPs
> in the DMZ and proxy arp set
Is anybody working on a LRP package for portsentry for the latest Bering-uClibc
distribution?
I see that the sources are available at http://sourceforge.net/projects/sentrytools/
Thanks for any info,
Ricardo
---
SF.Net is sponsored by: Spe
If memeory serves, you may need to load the serial.o module; setserial
is not needed in for most configurations.
-Richard
On Sun, 2004-02-22 at 05:23, [EMAIL PROTECTED] wrote:
> I have been very happy using the Dachstein-CD. I have configured 1
> for broadband, and also 1 for dialup with an
On Mon, 23 Feb 2004, Helio L. Filho wrote:
>
> I have a problem using DNAT rule :
> I'm trying to routing a request on port 9000 in the firewall and send to
> an internal host on port 80 .
>
> the rule i've set
>
> ACCEPT net fw tcp 9000
> ACCEPT net loc:192.168.1.40 tcp www
>
> DNAT ne
I'm using bering uclibc 2.1 .
I have 2 wlan interfaces in this server.
wlan1 provides service to clients using hostap the wlan0 connects to a
another server running hostap and up to the internet via shorewall.
The clients get ip addresses like 192.168.200.x and the uplink is on
192.168.100.x
th
Tom Eastep\ Nothing is foolproof to a sufficiently talented fool
Shoreline, \ http://shorewall.net
Washington USA \ [EMAIL PROTECTED]
-- Forwarded message --
Date: Sun, 22 Feb 2004 21:39:45 -0800 (Pacific Standard Time)
From: Tom Eastep <[EMAIL PROTECTED]>
To: Helio L. F