Hi
syslinux.cfg is not enough. To put a getty on a serial line, you need inittab
too.
Juergen
On 16. September 2014 23:30:32 MESZ, Timothy Wegner tweg...@swbell.net wrote:
Jurgen wrote:
have you upgraded your older 4801 box to version 5.1 with the geode
image or also with the
17.09.2014 00:30, Timothy Wegner пишет:
Jurgen wrote:
have you upgraded your older 4801 box to version 5.1 with the geode image or
also with the Bering-uClibc_5.1_x86_64_syslinux_vga.tar.gz
No, I have always used the 486 image
(Bering-uClibc_5.1_i486_syslinux_serial.tar.gz) with the older
Hi
bit late to chime in, can't remember everything you tried but
- have you verified you are loading _both_ initram files?
- if so, have you verified that the running system stub is capable to
read from your storage? I found problems with fast CF in the past.
- if you can read from your
Jürgen wrote:
syslinux.cfg is not enough. To put a getty on a serial line, you need inittab
too.
Of course you are right. I have the appropriate lines in inittab. Probably I
picked them up by re-using a configdb.lrp from a serial version of Leaf. I
appreciate the tip about re-using a