Hi Everyone
At 09:40 24/03/02 +1100, Glenn McKechnie wrote:
>Paul M. Wright, Jr. wrote:
>[...]
> > The card on the internal network works fine, but the card on the cable
> > modem
> > side just will not get a DHCP address. I receive a couple of console
> > messages:
> >
> > ETH0: Receive set to
Hi
At 12:09 24.03.2002 -0800, you wrote:
>Greetings!
>
>I have a box running the latest release of Bering and it works fine with
>some old NE2000 clone cards. However, I'm running out of these cards but
>have a good supply of 3c509b cards so I tried swapping them out and enabling
>the proper dri
What has worked for me in the past is to use the 3c5x9cfg program to set the
cards up manually. Meaning turning off PnP and setting the I/O and irq
manually, and obviously different for each card. I have 2 of these cards
running in an old Eigerstein box that only gets rebooted when there is a
I have a copy of the 3c5x9cfg config file, if you need it and can not
find it on the web. Let me know and I'll send to you.
Robert Chambers
Glenn McKechnie wrote:
>Paul M. Wright, Jr. wrote:
>[...]
>
>>The card on the internal network works fine, but the card on the cable
>>modem
>>side just
Paul M. Wright, Jr. wrote:
[...]
> The card on the internal network works fine, but the card on the cable
> modem
> side just will not get a DHCP address. I receive a couple of console
> messages:
>
> ETH0: Receive set to 1 addresses
> ETH0: Receive set to 0 addresses
> ETH0: Receive set to 1 a
Greetings!
I have a box running the latest release of Bering and it works fine with
some old NE2000 clone cards. However, I'm running out of these cards but
have a good supply of 3c509b cards so I tried swapping them out and enabling
the proper driver.
The card on the internal network works fin
