Hello,
since I am not realy fit in Networking, I must ask here...
I have a Mainboard with 6 PCI-Slots where on 5 are 3Com 3c905C and the
sixth has a VIA 4port where I want to connect 4 ADSL-Routers.
Since the fistst 5 NICS are NATed (five /24 Networks) I need to bridge
the 4 external IP's from t
Cédric Schieli wrote:
> Hi Erich
>
> That's what I've done to make it work :
>
> /etc/modules :
>
> wlan
> wlan_wep
> wlan_scan_sta
> wlan_scan_ap
> ath_hal
> ath_rate_sample
> ath_pci countrycode=250 autocreate=none
>
> /etc/network/interfaces :
>
> auto eth3
> iface eth3 inet static
>
Hi Cedric
Cédric Schieli wrote:
> Hi Erich
>
...
>
> The order of eth3 and br0 stanza are important.
That's basically what I did (and it works), just the documentation for
the bridge does not specify a way to handle this type of interface (one
that actually has to be initialized). So this is t
Hi Erich
That's what I've done to make it work :
/etc/modules :
wlan
wlan_wep
wlan_scan_sta
wlan_scan_ap
ath_hal
ath_rate_sample
ath_pci countrycode=250 autocreate=none
/etc/network/interfaces :
auto eth3
iface eth3 inet static
address 0.0.0.0
netmask 255.255.255.255
ma
hello
i need to do a bridging tunnel acrosss the internet, transparent to dhcp
and similar broudcasts.
i have done this with vtund, but it seamed to me to be a tad unstable,
as it needed a restart now and then.
what is the most stable tunneling solution available for lrp ?
encryption is not need
Hi all,
I'm trying to bridge the lan and wireless interfaces.
While the wireless card is in Master (Access Point) mode, all works fine.
I can pass traffic from the wireless side onto the lan and vice-versa.
However, when the wireless card is in Managed (Client) mode, associated
to an access
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I use the linux kernel bridging.. which does layer 2 bridging between
interfaces. you create a bridge, and then attach interfaces to it.
docs are here:
http://bridge.sourceforge.net/
this should work with the 2.4 (bearing, WISP-dist) as long as the
On Wednesday 08 January 2003 09:25 am, Jose Luis Abuelo Sebio wrote:
> hey, can any of you tell me how I can make a bridge
> between two interfaces in a computer with LRP?, I need
> the two interfaces with two IP address. I'll apreciate
> if any of you can give me the solution or if you know
> any
hey, can any of you tell me how I can make a bridge
between two interfaces in a computer with LRP?, I need
the two interfaces with two IP address. I'll apreciate
if any of you can give me the solution or if you know
any document to read. thanks
___
Y
I try to contact Vladimir about that, but dont get any answer, and i have to
create a hotmail account to subscribe the list, cos my personal account
([EMAIL PROTECTED]) dont receive the confirmation msg from the
mailman of leaf lists. (Are denying any brazilian domains in sourceforge or
leaf??)
Hello leaf-user,
I'm having a hard time to understand how bridging works...
so far, i make it working, but it's kindda weird... so, here it is:
I have a bering box, with 3 NIC's.
eth0, eth2 are coaxial backbones, and eth1 is utp backbone
I gave to coaxial false IP's (192.168.), and to
Hi all,
I have a small bridging question,
is it possible to create a bridge which includes an interface that is not
up yet??
What I am trying to do is using cipe tunneling to bridge two LAN's together.
But when I create the bridge the tunnel isn't necessary up yet.
If I configure cipe and I c
12 matches
Mail list logo
