Gentlemen,
Thank you for your assistance. It is now working as required. I had
to issue the command as options=0,48 to apply the 100mbit full duplex
to only eth1 as the cable modem on eth0 is of course limited to 10mbit.
Sincerely,
Kory Krofft
Ray Olszewski wrote:
>
> At 09:06 PM 7/31/02 +04
At 08:26 PM 7/31/02 -0400, Kory Krofft wrote:
>Vladimir, Ray, and all,
>
>I was using the eepro. I switched to the eepro100 which works well but
>has the same problem. The one missing piece is regarding the
>"options=48"
>parameter. Where do I enter this line?
In /etc/modules, after the module na
Vladimir, Ray, and all,
I was using the eepro. I switched to the eepro100 which works well but
has the same problem. The one missing piece is regarding the
"options=48"
parameter. Where do I enter this line?
Thank you,
Kory
"Vladimir B. Savkin" wrote:
>
> Thus spake Ray Olszewski:
> > At 01
--- Larry Platzek <[EMAIL PROTECTED]> wrote:
> Hi Cass,
> This sure looks like it does!
Looks like it does what? Have CF-IDE with write-protection?
> Net4501 SBC
> Description: This compact, low-power, low-cost, advanced
... [snip] ...
> I guess I do not see where the confusion is to the THREE
Sorry one and all I misread email and replied with the wrong answer and to
the wrong individuals, I reread the email as soon as was sent, now when is
the unsend key?
I will try to do better in the future! Sorry once again!
Larry Platzek [EMAIL PROTECTED]
---
At 09:06 PM 7/31/02 +0400, Vladimir B. Savkin wrote:
>Thus spake Ray Olszewski:
> > At 01:01 PM 7/31/02 +0400, Vladimir B. Savkin wrote:
> > >Thus spake Kory Krofft:
> > > > Can someone tell me how I can force my internal NIC (Intel 10/100 using
> > > > PCI eepro module) to run at 100mb full duple
ED]>
> Cc: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
> Subject: Re: [leaf-user] How do I set eepro nic to 100mbit?
>
> Thus spake Ray Olszewski:
> > At 01:01 PM 7/31/02 +0400, Vladimir B. Savkin wrote:
> > >Thus spake Kory Krofft:
> > >
Thus spake Ray Olszewski:
> At 01:01 PM 7/31/02 +0400, Vladimir B. Savkin wrote:
> >Thus spake Kory Krofft:
> > > Can someone tell me how I can force my internal NIC (Intel 10/100 using
> > > PCI eepro module) to run at 100mb full duplex
> [...]
>
> >'options=48' parameter will force eepro100 mod
At 01:01 PM 7/31/02 +0400, Vladimir B. Savkin wrote:
>Thus spake Kory Krofft:
> > Can someone tell me how I can force my internal NIC (Intel 10/100 using
> > PCI eepro module) to run at 100mb full duplex
[...]
>'options=48' parameter will force eepro100 module to 100baseTX-FD
Just to avoid confu
Thus spake Kory Krofft:
> Can someone tell me how I can force my internal NIC (Intel 10/100 using
> PCI eepro module) to run at 100mb full duplex? My switch does not
> support
> autosense and everytime I reset it I have to reboot the firewall to get
> my connection back.
'options=48' parameter wi
On Tue, 30 Jul 2002 18:04:56 PDT Ray O. wrote:
> At 08:36 PM 7/30/02 -0400, Kory Krofft wrote:
> >Can someone tell me how I can force my internal NIC (Intel 10/100 using
> >PCI eepro module) to run at 100mb full duplex? My switch does not
> >support
> >autosense and everytime I reset it I have t
At 08:36 PM 7/30/02 -0400, Kory Krofft wrote:
>Can someone tell me how I can force my internal NIC (Intel 10/100 using
>PCI eepro module) to run at 100mb full duplex? My switch does not
>support
>autosense and everytime I reset it I have to reboot the firewall to get
>my connection back.
>The fire
Can someone tell me how I can force my internal NIC (Intel 10/100 using
PCI eepro module) to run at 100mb full duplex? My switch does not
support
autosense and everytime I reset it I have to reboot the firewall to get
my connection back.
The firewall is a Dachstein floppy based unit connected to a
13 matches
Mail list logo