Re: Headstock coupling question

On Sun, Nov 26, 2017 at 7:56 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > $29.00 is what Legacy was selling them for. You will have to call and > ask, if they are still making them ((( ASK FOR Cindy!!!))) > > C.A.G.thanks guys. I guess one

Re: Headstock coupling question

$29.00 is what Legacy was selling them for.  You will have to call and ask, if they are still making them ((( ASK FOR Cindy!!!))) C.A.G. On Sunday, November 26, 2017 8:44 PM, russ veinot wrote: nice information gathering :>)  you made my life easier.  anyone

Re: Headstock coupling question

nice information gathering :>) you made my life easier. anyone know how much one is from Legacy? is it available? On Sunday, November 26, 2017 at 5:05:37 PM UTC-6, Joe Gassen wrote: > > Sorry to ask but I can’t find the answer. Some time back there was a > coupler discussed that would thread

Re: Headstock coupling question

Hello again Joe.while looking at Mc... wed. I found this.https://www.mcmaster.com/#stop-collars/=1afgazl   $8.96 for the threaded stop collar, and $2.91 for the 1".  (when time is money... Time is money.) for under $12.00 you can buy what you need. Of matter of coarse, the more you buy the

RE: Headstock coupling question

Joe are you talking about legacys Double Locking Collar 1x8 thread one side and sleeve to fit the legacy morse drive hub on the other Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Joe G Sent: Monday, 27 November 2017

Re: Headstock coupling question

Hello JoeI own one of those clamps/stop collars. It is a very easy set up to make..I have made a few that are like it in the past, (for work not the Legacy.) you can take two stop collars what ever size you want. in this case a 7/8" that will be threaded, and a 1" for the drive collar or spur.

Headstock coupling question

Sorry to ask but I can’t find the answer. Some time back there was a coupler discussed that would thread on my headstock 1”x8 and also clamp to 2 MT to allow precise alignment when positioning , say a 4 sided spindle and by adjusting set screws allow that opportunity. Anyone have a link to it or

Re: new legacy drive hubs

LiLtwisted, sometimes threads are just something else that can go wrong :>) so the lock collar holds even under high torque? Russ On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote: > https://www.youtube.com/watch?v=W-X6miCWaPg=em-uploademail > > > > hopefully some of you

Re: new legacy drive hubs

I have the #2mt and smooth outside so no threads. It was the way Woodchuck came out. My index hub was a cap that fit over the shaft. Now the #2MT is not going to be used and the Hub is going to be a cap again and I suspect it will be threaded inside. If there is a lock collar though it

Re: new legacy drive hubs

LiLtwisted, your chuck drives off the morse taper? what type of headstock do you have. you don't have a 1-8TPI shaft? Bill, well. . . i do hate typing:>) Russ On Monday, November 20, 2017 at 2:58:20 PM UTC-6, aussiman wrote: > https://www.youtube.com/watch?v=W-X6miCWaPg=em-uploademail > >