Hello again everyone.One more short note on this process.HOT MELT GLUE! When I
set my indexing hubs on to the work, I used one screw to hold the dowel and
bowl together, I also used a dab of hot melt glue to hold the hub in place,
this method works well for me. No damage to the work piece and
Rose engine work? Hahahaha
On May 6, 2018, 7:46 AM, at 7:46 AM, 'Curt George' via Legacy Ornamental Mills
wrote:
> Here is another picture of the box set up.
>C.A.G.
>
>On Saturday, May 5, 2018 12:52 AM, Curt George
>wrote:
>
>
Thank you Tom
The spiral design was made by cutting off center using a fluting bit
https://www.magnate.net/ProductDetails.asp?ProductCode=6053 I started 1/2" off
center, every full rotation I would move the bit on the "X" axis a 1/4" (one
turn of the handle.) the off-set was what made the
Hi Curt Kudus for your continual experimentation. I particularly like the
upper right in the fourth photo, the spiral design. I wonder if you have a
rotary table and could do a similar design on the inside of the bowl?
It might be more visible and show off your fine craftsmanship better.
Here is another picture of the box set up.
C.A.G.
On Saturday, May 5, 2018 12:52 AM, Curt George
wrote:
Hello everyone, Just got home form work.
I was thinking the bowl was 3"- 4"And I still think between centers will work
out well.
Bill a soft touch, is a
Hi Mac,
Currently we speak the Queen's English. Now this will change when Her Majesty
passes on and Charles becomes King Charles the Third, or if he dies before Her
Majesty, then we get King William the Fifth.
How can someone sell four bowls for $5.00, seems to me that they were made off