RE: Eccentric milling

t: Tuesday, May 28, 2024 11:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Eccentric milling Bill . Who makes that off-set chuck that you use in the video? C.A.G. On Monday, May 27, 2024 at 09:43:21 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: Thanks

Re: Eccentric milling

lls@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, May 28, 2024 12:49 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Eccentric milling > > > > I have the axminster style. I had a smalle

Re: Eccentric milling

mental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, May 28, 2024 12:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Eccentric milling   I have the axminster style. I had a smaller piece today I was messing with and could change the  eccentric without taking it off but its 

Re: Eccentric milling

ooglegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, May 28, 2024 12:49 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Eccentric milling > > > > I have the axminster style. I had a smaller piece today I was messing with > and could change t

RE: Eccentric milling

Ziegler Sent: Tuesday, May 28, 2024 12:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Eccentric milling I have the axminster style. I had a smaller piece today I was messing with and could change the eccentric without taking it off but its only about 3 inches in diam

RE: Eccentric milling

Ok sounds good pics are always good Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Tuesday, May 28, 2024 12:46 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Eccentric milling Thanks Bill yeah this was great thats actually what I

Re: Eccentric milling

ny pics but I did find these > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue > *Sent:* Tuesday, May 28, 2024 12:12 PM > *To:* legacy-ornamental-mills@googlegroups

Re: Eccentric milling

gt; legacy-ornamental-mills@googlegroups.com> *On Behalf Of *cdkr...@gmail.com > *Sent:* Tuesday, May 28, 2024 11:55 AM > *To:* Legacy Ornamental Mills > *Subject:* Re: Eccentric milling > > > > This could be done with a four jaw machinist chuck with independent jaws, >

Re: Eccentric milling

3:21 PM EDT, >> wrote: >> >> >> Thanks Curt it was fun to do >> >> >> >> Bill >> >> >> >> *From:* 'Curt George' via Legacy Ornamental Mills < >> legacy-orna...@googlegroups.com> >> *Sent:* Tuesday, May 28,

Re: Eccentric milling

Thanks Bill yeah this was great thats actually what I worked on today. Trying to figure things out. I did not get where I wanted to go. But I was more interested in the end grain. Spirals. I will post some pics. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty Ziegler Laser Worx LLC

RE: Eccentric milling

wakes an ok one the only annoying bit is you have to remove and replace a part to index it each time Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of cdkr...@gmail.com Sent: Tuesday, May 28, 2024 11:55 AM To: Legacy Ornamental Mills Subject: Re: Eccentric milling This

Re: Eccentric milling

Bill, Nice video - thanks for sharing! Now - if you will just post a photo or two of the finished product. Thanks. Mac -Original Message- From: Sent: May 27, 2024 7:24 PM To: Subject: Eccentric milling https://www.youtube.com/watch?v=ZeUVSzVQqus&ab_channel=aussiman77181 this

Re: Eccentric milling

o do > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-orna...@googlegroups.com> > *Sent:* Tuesday, May 28, 2024 10:10 AM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Eccentric milling > > &g

Re: Eccentric milling

ntal-mills@googlegroups.com Subject: Re: Eccentric milling   I am glad you re-posted this Bill.   I always liked the skill and craftsmanship you show in this video. Thank you.   C.A.G.   On Monday, May 27, 2024 at 07:24:22 PM EDT, bulke...@mmnet.com.au wrote:     https://www.youtube

RE: Eccentric milling

Thanks Curt it was fun to do Bill From: 'Curt George' via Legacy Ornamental Mills Sent: Tuesday, May 28, 2024 10:10 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Eccentric milling I am glad you re-posted this Bill. I always liked the skill and craftsm

Re: Eccentric milling

I am glad you re-posted this Bill. I always liked the skill and craftsmanship you show in this video.Thank you. C.A.G. On Monday, May 27, 2024 at 07:24:22 PM EDT, bulke...@mmnet.com.au wrote: https://www.youtube.com/watch?v=ZeUVSzVQqus&ab_channel=aussiman77181   this came up in an

Eccentric milling

https://www.youtube.com/watch?v=ZeUVSzVQqus &ab_channel=aussiman77181 this came up in an email I received about Eccentric chucks so I thought I would repost this video its been over 2 years since I made this I first saw th

Re: eccentric milling

ooglegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Friday, November 24, 2023 11:26 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: eccentric milling > > > > Good stuff Bill, > > and thanks for sharing. I have an to that I bought through Crafts Supp

RE: eccentric milling

Sent: Friday, November 24, 2023 11:26 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: eccentric milling Good stuff Bill, and thanks for sharing. I have an to that I bought through Crafts Supplies USA. Around the same price. I will try to post that link as well. I have not done

Re: eccentric milling

ston MN 56330 320-294-5798 shop 320-630-2243 cell On Fri, Nov 24, 2023 at 2:19 AM wrote: > Hey guys remember my eccentric milling using my orbit chuck > https://www.youtube.com/watch?v=ZeUVSzVQqus&ab_channel=aussiman77181 > > > > Well I was looking on the net to

eccentric milling

Hey guys remember my eccentric milling using my orbit chuck https://www.youtube.com/watch?v=ZeUVSzVQqus <https://www.youtube.com/watch?v=ZeUVSzVQqus&ab_channel=aussiman77181> &ab_channel=aussiman77181 Well I was looking on the net today and found this https://nilesbottlestoppe

Re: eccentric milling

are. > > > > Cheers! > > Mac > -- > -- > > -Original Message- > From: > Sent: Sep 22, 2021 10:53 PM > To: > Subject: Re: eccentric milling > > great thanks for that Mac. I honestly don't think i ever messed wi

Re: eccentric milling

:53 PM To: Subject: Re: eccentric milling great thanks for that Mac. I honestly don't think i ever messed with that in the 30 years I had shopsmiths Kind Regards,  Timothy J. Ziegler On Wed, Sep 22, 2021 at 7:54 PM M.W.Foscue mwfos...@earthlink.net> wrote: You will see small tick mark

Re: eccentric milling

. > Mac > -Original Message- > From: > Sent: Sep 21, 2021 9:29 PM > To: > Subject: Re: eccentric milling > > Hey Mac thanks for the tip on the shopsmith I did not know that. (or > forgot?) lolI will still pursue the LOM eccentric but I guess its been far > to long >

Re: eccentric milling

- From: Sent: Sep 21, 2021 9:29 PM To: Subject: Re: eccentric milling Hey Mac thanks for the tip on the shopsmith I did not know that. (or forgot?) lolI will still pursue the LOM eccentric but I guess its been far to long  since I watched a shopsmith demo wow.  Kind Regards,  Timothy J. Ziegl

Re: eccentric milling

- > > -Original Message- > From: > Sent: Sep 21, 2021 9:32 AM > To: legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> > Subject: Re: eccentric milling > > > Hello again. > the large chuck will not fit on the L

Re: eccentric milling

ot;such as Cabriole Legs". > > > > Have a Terrific Tuesday. > > Mac > -- > -- > > -Original Message- > From: > Sent: Sep 21, 2021 9:24 AM > To: 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com>

Re: eccentric milling

, 05:06:49 AM EDT, > wrote: > > > New project today in the shop eccentric milling on the legacy just playing > around, a video coming just got to upload it. I might make a cup and attach > it to the top and turn it into a goblet. It was a fun project my cat said I > don’t care I

Re: eccentric milling

Very Nice!Good job Bill ! C.A.G. On Monday, September 20, 2021, 05:06:49 AM EDT, bulke...@mmnet.com.au wrote: New project today in the shop eccentric milling on the legacy just playing around, a video coming just got to upload it. I might make a cup and attach it to the top and turn

Re: eccentric milling

Nice, very innovative On Monday, September 20, 2021, wrote: > New project today in the shop eccentric milling on the legacy just playing > around, a video coming just got to upload it. I might make a cup and attach > it to the top and turn it into a goblet. It was a fun project my c

Re: eccentric milling

sharing. Mac -Original Message- From: Sent: Sep 20, 2021 5:05 AM To: Subject: eccentric milling New project today in the shop eccentric milling on the legacy just playing around, a video coming just got to upload it. I might make a cup and attach it to the top and turn it into a goblet. It wa

Re: eccentric milling

t; *On Behalf Of *Tim Ziegler > *Sent:* Monday, 20 September 2021 11:29 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: eccentric milling > > > > yup I figured so. Wow the REVO would really be nice to have its so open. > > > Kind Regards, >

RE: eccentric milling

Tim Ziegler Sent: Monday, 20 September 2021 11:29 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: eccentric milling yup I figured so. Wow the REVO would really be nice to have its so open. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th

Re: eccentric milling

namental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, 20 September 2021 11:17 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: eccentric milling > > > > Great information Bill. As I h

RE: eccentric milling

Thank you kind sir Bill From: legacy-ornamental-mills@googlegroups.com On Behalf Of Tim Ziegler Sent: Monday, 20 September 2021 11:17 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: eccentric milling Great information Bill. As I have told Curt and you, this is what

Re: eccentric milling

r 2021 9:49 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: eccentric milling > > > > Wow super intriguing Bill, > > Yes I just watched the video. Sorry my questions came before the vid. > > Nice Job. Looks like I have another jig to make. > > What

Re: eccentric milling

uck from the lathe to rotate it for each disk you dont > have to do that with the orbit chuck as you can see in the video. > > > > Bill > > > > > > > > > > > > > > > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.co

RE: eccentric milling

: Re: eccentric milling Wow super intriguing Bill, Yes I just watched the video. Sorry my questions came before the vid. Nice Job. Looks like I have another jig to make. What type of wood are you using? Seems you have some milling bits then by the looks of things. What is the

RE: eccentric milling

September 2021 9:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: eccentric milling Wow super intriguing Bill, Yes I just watched the video. Sorry my questions came before the vid. Nice Job. Looks like I have another jig to make. What type of wood are you using? Seems you

Re: eccentric milling

Ziegler > *Sent:* Monday, 20 September 2021 8:49 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: eccentric milling > > > > Good morning Bill, > > > > Very creative and thanks for sharing. I am looking forward to the final > piece, > > wh

Re: eccentric milling

glegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of * > bulke...@mmnet.com.au > *Sent:* Monday, 20 September 2021 7:05 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* eccentric milling > > > > New project today in the shop eccentric

RE: eccentric milling

021 8:49 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: eccentric milling Oh PS Love the Cat lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Sep 20, 2021 at 4:

RE: eccentric milling

Subject: Re: eccentric milling Good morning Bill, Very creative and thanks for sharing. I am looking forward to the final piece, when you top it with the goblet or what ever you chose to put on it. Very much looking forward to the video. I sure appreciate your enthusiasm and drive to make

Re: eccentric milling

Oh PS Love the Cat lol. Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Mon, Sep 20, 2021 at 4:06 AM wrote: > New project today in the shop eccentric milling on the legacy just playing > aroun

Re: eccentric milling

shop 320-630-2243 cell On Mon, Sep 20, 2021 at 4:06 AM wrote: > New project today in the shop eccentric milling on the legacy just playing > around, a video coming just got to upload it. I might make a cup and attach > it to the top and turn it into a goblet. It was a fun project my

RE: eccentric milling

namental-mills@googlegroups.com On Behalf Of bulke...@mmnet.com.au Sent: Monday, 20 September 2021 7:05 PM To: legacy-ornamental-mills@googlegroups.com Subject: eccentric milling New project today in the shop eccentric milling on the legacy just playing around, a video coming just got to uplo