[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Thursday, 19 April 2018 12:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup
The longer link worked for me the second time I tried it. There is about two
o get either link to work.
>Thanks for trying.
>Mac
>_
>
>-Original Message-
>From: Bill Bulkeley
>Sent: Apr 18, 2018 8:32 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: RE: Need help with Clamping systems
Bill,I, too, was unable to get either link to work.Thanks for trying.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Apr 18, 2018 8:32 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup
@googlegroups.com
Subject: Re: Need help with Clamping systems and contour following setup
I had trouble with the videos, are they stored anywhere else I could try? :
This link was 47 seconds of static:
<https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20cont
minuets
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Wednesday, 18 April 2018 7:43 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *
This should be what I need, Thank you!
> On Apr 17, 2018, at 11:04 PM, Harvey Matyas wrote:
>
> I don't know if this will help you.
>
> https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills
>
Can you take a photo of your mill so I can get you the correct manual.
Template turning does work, it just take practice. There is very little
documentation on the technique. The video bill pointed out is a very good
reference.
Tim
On Apr 17, 2018, 7:54 PM, at 7:54 PM, Tekin Turan
Hello TekinThe key words here are designed for... The Legacy can do a lot, but
there are somethings that is dose better then others. making your Legacy into a
copy lathe of sorts would not be my first choice of projects, I would try
starting a new.And starting with some basics first.
Bill's
I don't know if this will help you.
https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills
Go to the user's group email and type manual in the search.
Harvey
On Tue, Apr 17, 2018 at 9:54 PM, Tekin Turan
Hi Tim-
Cannot find the manual. Is it available online somewhere you could point me?
For templates, my thought was to do round work like a copy lathe. A few of the
posts I’ve read here lead me to believe that isn’t something the LOM is
designed for.
> On Apr 17, 2018, at 9:22 PM, Tim Krause
Do you have the manual? That should cover assembly of the horizontal and
vertical clamps.
Are you planning on using the templates to turn something or for doing some
flat work?
Tim
PS. Welcome to the group.
On Apr 16, 2018, 6:28 PM, at 6:28 PM, Turan Tekin wrote:
>Hi
rnamental-mills@googlegroups.com
> Subject: RE: Need help with Clamping systems and contour following setup
>
> Hi welcome to the group not sure why anybody else hasn’t answered your email
> yet, i have an old video on template work using the woodchuck legacy mill
> it’s not the
@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018 7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup
Hi welcome to the group not sure why anybody else hasn’t answered your email
yet, i have an old video
Hi welcome to the group not sure why anybody else hasn’t answered your email
yet, i have an old video on template work using the woodchuck legacy mill it’s
not the same mill as yours but the principle is the same will try and post a
link to it.
14 matches
Mail list logo