@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Emmanuel Peluchon
Sent: Tuesday, 7 May 2019 2:34 AM
To: Legacy Ornamental Mills
Subject: Re: X shaft powered with engine and carriage stops - possible damage ?
Hi Bill, thank you for this great idea ! I also keep this
*On Behalf Of
> *Emmanuel
> Peluchon
> *Sent:* Monday, 6 May 2019 5:43 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Re: X shaft powered with engine and carriage stops - possible
> damage ?
>
>
>
> Yes Bill. When I set up the x2 gears, I managed to reduce backlas
out there
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com ] *On Behalf Of
> *Emmanuel
> Peluchon
> *Sent:* Monday, 6 May 2019 1:25 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Re: X shaf
Ornamental Mills
Subject: Re: X shaft powered with engine and carriage stops - possible damage ?
Oh Great ! Thank you Kurt.
For the falt ribbon job I fortunately cut in both directions successfully and
saved a lot of time.
I will have a look to the different limit switches set up I can find in
Oh Great ! Thank you Kurt.
For the falt ribbon job I fortunately cut in both directions successfully
and saved a lot of time.
I will have a look to the different limit switches set up I can find in
this group and decide.
Have a nice day.
Emmanuel
Le samedi 4 mai 2019 20:59:58 UTC-4, Curt George
Hello EmanuelAmazon
https://www.amazon.com/s?k=limit+switches&ref=nb_sb_noss_1 has a number of
different stiles of switches that you can buy on the cheep.Granger and
McMasters also have limit switches for sale. and so dose E-bay.
All depending on why kind of switch you buy, the mounting of t
Hi Kurt and Bill, Thank you for your answer.
It was quite obvious but still I wondered if there was some kind of trick.
I will need to order new switches. Do you have any idea where I can order
LOM compatible limit switches?
Thank you again.
Le samedi 4 mai 2019 12:08:48 UTC-4, Curt George a écr
groups.com
Subject: Re: X shaft powered with engine and carriage stops - possible damage ?
Hello Emmanuel
If I understand your question about the stops. If you use your machine by the
use of your hand cranking, the stops work pretty well, If you are using a motor
to drive your machine, the
