y-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> bulke...@mmnet.com.au
>> *Sent:* Friday, 28 May 2021 2:23 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* RE: the Holy Grail of Legacy machi
-ornamental-mills@googlegroups.com
Subject: Re: the Holy Grail of Legacy machines
Holy cow. The 4x gear is a beast. The machines I think it would be relevant for
are the 2000 and 2200 since it can handle parts over 10' long. Hard to imagine
it being very useful on the smaller mac
> bulke...@mmnet.com.au
> *Sent:* Friday, 28 May 2021 2:23 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: the Holy Grail of Legacy machines
>
>
>
> Not me I said around $3500 I still think that’s a fair price for what you
> would be getting and that
@googlegroups.com
Subject: RE: the Holy Grail of Legacy machines
Not me I said around $3500 I still think that’s a fair price for what you would
be getting and that is working on the usual ½ the new price for second hand
Goods
Bill
From: 'finu...@aol.com' via Legacy Orname
ntal Mills
Subject: Re: the Holy Grail of Legacy machines
well, seems to be a lot of people that have an opinion of what this machine and
accessories is NOT worth. but no one is offering an opinion as to what they
think it IS worth... and I would bet we all have stories of that rare, elusive
pie
; legacy-orna...@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, May 27, 2021 6:44 AM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: the Holy Grail of Legacy machines
>
>
>
> Very well stated Tracy,
>
> I have to agree with all you said.
>
-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Thursday, May 27, 2021 6:44 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: the Holy Grail of Legacy machines
Very well stated Tracy,
I have to agree with all you said
all and sell all the bits
>>>> to all you guys but alas I am a poor man so.. someone will get it all in
>>>> one big buy
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:*
> one big buy
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-orna...@googlegroups.com>
>>> *Sent:* Thursday, 27 May 2021 12:18 AM
>
s are
>>>> good but they don’t cover all the smaller pitches. remembering what other
>>>> mills I see for sale I thought it was a fair price what do you think is a
>>>> better price? As with all things for sale it all depends on how bad the
>>
I do know the movie seen it a few times nice movie
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of M.W.Foscue
Sent: Thursday, 27 May 2021 4:12 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: the Holy Grail of Legacy machines
Hi Robert,
Gotta ask
Bill,Thanks. The earlier link worked for me.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: May 27, 2021 12:27 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: the Holy Grail of Legacy machines
Ok lets try this again https://www.dropbox.com/s/doy454hicrvt155/native
rt in Yuma. A battle of wills ensues as the outlaw tries to psych out the rancher." Have a respectful Memorial Day Weekend folks.Mac-Original Message-
From: Robert Coates
Sent: May 26, 2021 4:20 PM
To: Legacy Ornamental Mills
Subject: Re: the Holy Grail of Legacy machines
also the m
Me too curt I just like the cnc videos to see how we can do it on the manual
mills lol
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Thursday, 27 May 2021 2:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: the Holy Grail of Legacy machines
Nic
gt;
> Ok lets try this again
> https://www.dropbox.com/s/doy454hicrvt155/native%20flute.mp4?dl=0
>
>
>
> Bill
>
>
>
> *From:* legacy-orna...@googlegroups.com *On
> Behalf Of *bulk...@mmnet.com.au
> *Sent:* Thursday, 27 May 2021 2:06 PM
> *To:* legacy-orna...@googleg
On Behalf Of bulke...@mmnet.com.au
Sent: Thursday, 27 May 2021 2:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: the Holy Grail of Legacy machines
https://www.dropbox.com/sh/c1l2rk3x7x8u8tp/AABDOUO18HBunlPyT1m7sQ1aa?dl=0
here is one working joe from the legacy videos tha
Sent: Thursday, 27 May 2021 11:24 AM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: the Holy Grail of Legacy machines
to Tom Weaver... Tom, does your CNC have the rack-and-pinion version of the CNC
upgrade?... or do you have the stepper m
a Legacy Ornamental Mills
Subject: Re: the Holy Grail of Legacy machines
"HOLEY COW"!
What kind of prices are you/he looking to get?
Before Bill ask, (I think everyone know.) Bill have been looking for a motor
and limit switches. If you are parting this out I know he will be want
l
From: 'finu...@aol.com' via Legacy Ornamental Mills
mailto:legacy-orna...@googlegroups.com> >
Sent: Thursday, 27 May 2021 10:10 AM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: Re: the Holy Grail of Legacy machines
Hey Bill!... I might think
one
>> big buy
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com>
>> *Sent:* Thursday, 27 May 2021 12:18 AM
>> *To:* 'finu...@aol.
rnamental-mills@googlegroups.com> *On Behalf Of *Tracy Smith
> *Sent:* Thursday, 27 May 2021 12:44 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: the Holy Grail of Legacy machines
>
>
>
> From my perspective $3500 would be way too high. The CNC side of t
PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: the Holy Grail of Legacy machines
>From my perspective $3500 would be way too high. The CNC side of this machine
>would be a complete mystery and major risk. It likely works fine but there is
>no support from Legacy and ev
ts the item. Just because
>>> new it all cost a fortune doesn’t mean you will get a fortune when you sell
>>> it this is all just my opinion im interested on what every one else’s is.
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>
oved into the group, so everyone can then have contact with him
>> directly... good luck to all and the seller as well... Joe B.
>>
>> On Wednesday, May 26, 2021 at 7:47:35 PM UTC-4 aussiman wrote:
>>
>> Anybody come up with a price yet I’m guessing around 3 ½ K
*From:* 'finu...@aol.com' via Legacy Ornamental Mills <
> legacy-orna...@googlegroups.com>
> *Sent:* Thursday, 27 May 2021 10:10 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Re: the Holy Grail of Legacy machines
>
>
>
> Hey Bill!... I might think it wil
legroups.com On
>> Behalf Of Tracy Smith
>> Sent: Wednesday, 26 May 2021 8:15 AM
>> To: legacy-orna...@googlegroups.com
>> Subject: Re: the Holy Grail of Legacy machines
>>
>>
>>
>> Joe,
>>
>>
>>
>> Do you know the ve
er know what an item will sell for until you put it out there "For Sale"!Best of luck to the Seller as well as to any Group member interested in buying it.Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: May 26, 2021 8:45 PM
To: legacy-ornamental-mills@googlegroups.com
Subjec
To: Legacy Ornamental Mills
Subject: Re: the Holy Grail of Legacy machines
Hey Bill!... I might think it will be more than the $3,500 you are
estimating... spoke to the seller and he mentioned that there are at least 12
of those 6" long Magnate bits that are made specifically for the Legacy ma
Joe,As I always suspected: You are a GREAT guy!We need more folks in the world that are as helpful as you are!(Luckily, a good number of The Group members are like you - VERY helpful to all that seek help.)You have done a GREAT job informing The Group about this upcoming availablity of the Mill. I
gt;
>
>
> *From:* legacy-orna...@googlegroups.com *On
> Behalf Of *Tracy Smith
> *Sent:* Wednesday, 26 May 2021 8:15 AM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: the Holy Grail of Legacy machines
>
>
>
> Joe,
>
>
>
> Do you know the version o
: the Holy Grail of Legacy machines
Joe,
Do you know the version of the CNC upgrade? It was either Standard or
Performance.
Tracy
On Tue, May 25, 2021 at 3:13 PM 'finu...@aol.com <mailto:finu...@aol.com> ' via
Legacy Ornamental Mills mailto:legacy-ornamental-mills@
ill
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-orna...@googlegroups.com>
>> *Sent:* Thursday, 27 May 2021 12:18 AM
>> *To:* 'finu...@aol.com' via Legacy Ornamental Mills <
>> le
Joe,
I'll send you a private message. Over the last three years, I have bought
and sold at least 8 LOMs. I live pretty close to the "Mother Ship" so I
have been pretty lucky with access to machines during that time. My
interest in selling has not been to make top dollar but rather to find and
educ
okay, let's clarify a few things... I am not in any way in control of this
sale... I am simply lending some guidance to a person who has no desire to
keep this recently acquired Legacy machine and has little to no
understanding of what the machine is or what it is capable of doing... I
could co
[image: legacy for sale bob 11.jpg][image: legacy for sale bob 12.jpg]
On Wednesday, May 26, 2021 at 10:01:46 AM UTC-4 finu...@aol.com wrote:
> [image: legacy for sale bob 9.jpg][image: legacy for sale bob 10.jpg]
>
> On Wednesday, May 26, 2021 at 9:59:14 AM UTC-4 finu...@aol.com wrote:
>
>> [ima
[image: legacy for sale bob 7.jpg][image: legacy for sale bob 8.jpg]
On Wednesday, May 26, 2021 at 9:18:50 AM UTC-4 finu...@aol.com wrote:
> [image: legacy for sale bob 5.jpg][image: legacy for sale bob 6.jpg]
>
> On Wednesday, May 26, 2021 at 9:17:36 AM UTC-4 finu...@aol.com wrote:
>
>> [image:
[image: legacy for sale bob 1.jpg][image: legacy for sale bob 2.jpg]
On Wednesday, May 26, 2021 at 9:04:28 AM UTC-4 finu...@aol.com wrote:
> some are asking for a more specific location of this piece... without
> putting you vultures(LOL!) on a direct path, Ill say southeast california,
> near
some are asking for a more specific location of this piece... without
putting you vultures(LOL!) on a direct path, Ill say southeast california,
near the Mexico border... if you are willing to travel to get this unique
machine and accessories, that should help you out for now... pictures being
Pictures tomorrow and it is a package deal
Sent from the all new Aol app for iOS
On Tuesday, May 25, 2021, 6:58 PM, bulke...@mmnet.com.au
wrote:
#yiv3760142198 #yiv3760142198 -- _filtered {} _filtered {}#yiv3760142198
#yiv3760142198 p.yiv3760142198MsoNormal, #yiv3760142198
li.yiv376014219
I believe it is the standard, i.e. no rack and pinion... and he is not parting
these items out, it is a package deal
Sent from the all new Aol app for iOS
On Tuesday, May 25, 2021, 6:15 PM, Tracy Smith wrote:
Joe,
Do you know the version of the CNC upgrade? It was either Standard or
Perform
So he is selling as a whole package correct? Any way of getting pictures that
always will help with selling
Bill
From: 'finu...@aol.com' via Legacy Ornamental Mills
Sent: Wednesday, 26 May 2021 7:14 AM
To: Legacy Ornamental Mills
Subject: the Holy Grail of Legacy machines
okay guys
Joe,
Do you know the version of the CNC upgrade? It was either Standard or
Performance.
Tracy
On Tue, May 25, 2021 at 3:13 PM 'finu...@aol.com' via Legacy Ornamental
Mills wrote:
> okay guys, time to separate the men from the boys!... I was recently
> contacted by someone who just obtained a L
42 matches
Mail list logo
