; >
> >
> >
> > *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *MWF
> > *Sent:* 06 January 2016 15:33
> >
> > *
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *MWF
> *Sent:* 06 January 2016 15:33
>
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: legacy woodworking
>
!
Cheers
Roger
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: 05 January 2016 22:57
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Yes i was thinking of you sorry roger i thought
2016 9:54 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Hi Bill
In April it is my turn to do a demonstration at the woodturning club I belong
to. So I am now in “learning mode” planning and getting ready for it. I know
what I want to turn, which
@googlegroups.com
Subject: RE: legacy woodworking
Sounds great roger i look forward to it. Does your club video it ? perhaps they
would post it on you tube if they do that would be cool
Bill
From: legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.
Roger,Were you going to be a "co-star" in films with Christine Keeler? Mac-Original Message-
From: Roger Phebey <rhp...@gmail.com>
Sent: Jan 6, 2016 7:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
<zzz!--[if !mso]=""&
22 years ago I lived about an 8 minute drive away.
Cheers
Roger
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF
Sent: 06 January 2016 15:33
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Don’t know how to do that.
Michael P. Kratky
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Monday, January 04, 2016 10
@googlegroups.com
Subject: RE: legacy woodworking
As with most legacy stuff you will most likely teach yourself, i assume you can
buy programs already written from them
for certain things to get you started then it’s up to you and the web lessons
they have on line i guess.
i think roger out
-mills@googlegroups.com] On Behalf Of Roger Phebey
Sent: Wednesday, 6 January 2016 9:44 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Hi Bill
If you mean me well I started then gave up for a number of reasons, as follows:-
1. We moved house in May
@googlegroups.com
Subject: RE: legacy woodworking
Thanks Bill but my drop box capacity is full so I can neither open it nor store
the file, it’s a 1200 LOM.
Michael P. Kratky
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill
From: Bill Bulkeley [mailto:bulke...@mmnet.com.au]
Sent: Tuesday, 5 January 2016 10:41 AM
To: 'legacy-ornamental-mills@googlegroups.com'
Subject: RE: legacy woodworking
https://www.dropbox.com/sh/c1l2rk3x7x8u8tp/AABDOUO18HBunlPyT1m7sQ1aa?dl=0#
<https://www.dropbox.com
Sounds good take lots of pics for us
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Charles Peel
Sent: Tuesday, 5 January 2016 1:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Well
-mills@googlegroups.com] On Behalf Of MWF
Sent: Monday, January 04, 2016 10:18 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Hello Charles,
"Welcome" to The Group. (You have been gone sooo long - it's appropriate to
"welcome" you again.)
So ve
Subject: RE: legacy woodworking
Thanks Bill but my drop box capacity is full so I can neither open it nor store
the file, it’s a 1200 LOM.
Michael P. Kratky
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
t. Upper & lower support rails on one side were wrong.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Jan 4, 2016 7:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: FW: legacy woodworking
<zzz!--[if !mso]="">
<zzz![endif
n Behalf Of Milt Engelke
> Sent: Sunday, 3 January 2016 3:49 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: legacy woodworking
>
> Now that you are retired you'll find that working got in the way of all the
> other things you want(ed) to do, and now won't have
:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: FW: legacy woodworking
From: Bill Bulkeley [mailto:bulke...@mmnet.com.au]
Sent: Tuesday, 5 January 2016 10:41 AM
To: 'legacy-ornamental-mills@googlegroups.com'
Subject: RE: legacy woodworking
https://www.dropbox.com/sh
with it - like a Pie Crust End Table? We all look forward to seeing pics of both your Maverick and what you make on it.Have a Great week.Mac-Original Message-
From: Charles Peel <pee...@comcast.net>
Sent: Jan 4, 2016 9:26 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legac
Ps how much are they$$$
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Charles Peel
Sent: Tuesday, 5 January 2016 1:27 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Well guys I have been
-ornamental-mills@googlegroups.com] On Behalf Of MWF
Sent: Monday, January 04, 2016 10:18 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Hello Charles,
"Welcome" to The Group. (You have been gone sooo long - it's appropriate to
"welcome" you aga
] On Behalf Of Milt Engelke
> > Sent: Sunday, 3 January 2016 3:49 AM
> > To: legacy-ornamental-mills@googlegroups.com
> > Subject: Re: legacy woodworking
> >
> > Now that you are retired you'll find that working got in the way of all the
> > other things you
the Group - until I saw your post.Thanks again. (Is it 2016 "Down-under" yet? JK)Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Jan 3, 2016 6:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
<zzz!--[if !ms
@googlegroups.com
Subject: RE: legacy woodworking
Bill,
Thanks - that's the exact document that I was able to access/open using the
earlier discussed link. With two guys saying they couldn't open "it" - I was
beginning to wonder if I was actually somehow accessing the wrong document.
I was goi
their mouth is.
Michael P. Kratky
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Sunday, January 03, 2016 6:39 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Try this
Bill
Hmm, okay... give it sometime, it will be back.
- Original Message -
From: Michael Kratky
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, January 03, 2016 8:19 AM
Subject: RE: legacy woodworking
Same results: unavailable
From: legacy
ct: RE: legacy woodworking
Close, except for the lack of the ornate carvings on the column.
Michael P. Kratky
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop recei
Try again.
- Original Message -
From: Michael Kratky
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, January 03, 2016 7:19 AM
Subject: RE: legacy woodworking
That web site is unavailable.
Michael P. Kratky
From: legacy-ornamental-mills
Same results: unavailable
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Sunday, January 03, 2016 11:20 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Try again
-ornamental-mills@googlegroups.com] On Behalf Of MWF
Sent: Sunday, January 03, 2016 12:22 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: legacy woodworking
Michael (and others),
Are you referring to this site as not available?:
Don's http://www.ornamentalmills.com/turningaround
$20pie$20crust$20table/legacy-ornamental-mills/W9gfr-BUXwY/Vv8XxuojU-sJ
C.A.G.
- Original Message -
From: "Michael Kratky" <krat...@roadrunner.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, January 3, 2016 11:19:03 AM
Subject: RE: legacy woodworking
.)
C.A.G.
- Original Message -
From: "Okla Mike (Liltwisted)" <legacym...@iglide.net>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, January 2, 2016 1:22:02 AM
Subject: Re: legacy woodworking
Nice find I will have to check them all out.
Mike
OK
On 1/1/2016 10:
ental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Saturday, January 02, 2016 1:23 PM
To: legacy-ornamental-mills@googlegroups.com
Cc: Michael Kratky
Subject: RE: legacy woodworking
The feet would take some effort with a CNC but the rest would not be that big
of a deal. They
.com] On Behalf Of CURTIS GEORGE
> Sent: Saturday, January 02, 2016 8:43 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: legacy woodworking
>
>
>
> Good morning Bill. (and everyone else out there.) ;-)
>
>
>
> Nice find Ive seen the Artisa
-mills@googlegroups.com
Subject: Re: legacy woodworking
Is this the table you are referring to?
On 1/2/2016 10:49 AM, Michael Kratky wrote:
Jeff
Thank you excellent advice, actually I have a specific project in mind a
Victorian pie crust tilt top table heavily carved (on display
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of
jwb...@windstream.net
Sent: Saturday, January 02, 2016 11:15 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Michael Kratky
Subject: RE: legacy woodworking
I have a legacy CNC, If I were to start with a CNC with what I know now I would
do
rom: legacy-ornamental-mills@googlegroups.com
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike
> (Liltwisted)
> Sent: Saturday, January 02, 2016 12:03 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: legacy woodworking
>
>
>
>
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Good morning Bill. (and everyone else out there.) ;-)
Nice find Ive seen the Artisan video but not the others. I almost forgot how
good of a Salesman Tracy was. I almost want to go out and buy a new CNC now. (I
said
roups.com] On Behalf Of CURTIS GEORGE
> Sent: Saturday, January 02, 2016 8:43 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: legacy woodworking
>
> Good morning Bill. (and everyone else out there.) ;-)
>
> Nice find Ive seen the Artisan video but not the others
, January 02, 2016 11:15 AM
To: legacy-ornamental-mills@googlegroups.com
Cc: Michael Kratky
Subject: RE: legacy woodworking
I have a legacy CNC, If I were to start with a CNC with what I know now I would
do it differently than I did it at first. First thing I would do is find a cam
soft ware
Of Milt Engelke
Sent: Sunday, 3 January 2016 3:49 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: legacy woodworking
Now that you are retired you'll find that working got in the way of all the
other things you want(ed) to do, and now won't have time for a lot of those
either.
Should
I'm assuming you have seen Don's
http://www.ornamentalmills.com/turningaround/PieCrustTable.htm .
- Original Message -
From: Michael Kratky
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, January 02, 2016 9:06 AM
Subject: RE: legacy woodworking
Close, except
I was browsing and came on these videos i must have missed them i don't
remember seeing them
Before you guys might find them interesting
http://www.legacywoodworking.com/CommercialCNC.cfm
Bill
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental
Nice find I will have to check them all out.
Mike
OK
On 1/1/2016 10:24 PM, Bill Bulkeley wrote:
I was browsing and came on these videos i must have missed them i
don’t remember seeing them
Before you guys might find them interesting
http://www.legacywoodworking.com/CommercialCNC.cfm
http://www.ebay.com/itm/Lathe-Legacy-Woodworking-Machinery-Model-L1000EXS-40-Model-/191588952482?
Includes the following:
* Eliminator chuck
* Porter Cable 7539 Router
* Number of specialty router bits
* Spindle clips
* Spindle clip center
* Media package
* Extra gear pack
--
You
From the sounds of the chatter on the Legacy Goggle site it's time I
answered some questions for the group. I'll try to handle them one at a
time.
1. Question: Has Legacy Woodworking given up on the home workshop market
in favor of the commercial market? Answer. no, the development
Woodworking
From the sounds of the chatter on the Legacy Goggle site it's time I answered
some questions for the group. I'll try to handle them one at a time.
1.. Question: Has Legacy Woodworking given up on the home workshop market
in favor of the commercial market? Answer
Will the newer up-grades work with to older machines? Like the old model 1000.
Thanks, Larry
- Original Message -
From: curt george
To: Legacy-Ornamental-Mills@googlegroups.com
Sent: Tuesday, October 21, 2008 6:17 PM
Subject: Re: The future of Legacy Woodworking
Thank you
I was looking for a process for creating a barley twist i wanted to
modify and went back looking for a refresher and it looks like all
their Woodworking academy files are gone fromthe website. Anybody know
why or where they are?
--~--~-~--~~~---~--~~
You received
Thanks Bill,
If its not too much of a project i may want you to zip some up and
send and i will let you know which ones. Thanks again for the
offer
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups
Legacy
instructions on
how to turn a round, cut a hollow sprial, and so on. Probably if somone wrote
to Tracy he would give you a link to that one as well.
Bruce
--- On Wed, 9/10/08, myxpykalix1 [EMAIL PROTECTED] wrote:
From: myxpykalix1 [EMAIL PROTECTED]
Subject: Re: Legacy woodworking academy GONE?
To: Legacy
51 matches
Mail list logo