Mine is the WC MA but can check the manual I have to see if anything is
like, but Mike Pung would really be the guy to ask.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Thu, May 5, 2022 at 11:51 PM 'Curt
I bought a woodchuck model IRT-33P on ebay. The manual is useless and there are
no photos. Does anyone in the group have this model and would they be willing
to help me with questions. Any help would be greatly appreciated.Thank you
Robert Seliger
THE HISTORY PAGE.https://ornamentalmills.com/h
Welcome!!
Denson from Texas
Sent from Denson's iPhone
> On Jan 24, 2022, at 11:28 AM, Chris Smith wrote:
>
>
> Mal,
> Welcome to the group. Where do you live?
> Chris
>
> Chris Smith
> Sacramento, California
>
>
>
>
>> On Mon, Jan 24, 2022 at 4:04 AM Jeff Richmond wrote:
>> Welcome to
Mal,
Welcome to the group. Where do you live?
Chris
Chris Smith
Sacramento, California
On Mon, Jan 24, 2022 at 4:04 AM Jeff Richmond wrote:
> Welcome to the group!
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Jan 23, 2022, at 11:00 PM, 'Yahoo Action(US)' via Legacy Ornamental
>
Welcome to the group!
Jeff from Connecticut
Sent from my iPhone
> On Jan 23, 2022, at 11:00 PM, 'Yahoo Action(US)' via Legacy Ornamental Mills
> wrote:
>
>
> Hello,
> Thanks for accepting my application for membership in the group.
> Mal
> --
> You received this message because you are su
Welcome aboard Mal,
We are excited to have you in our group and look forward to some posts, pix
of
some of what you've turned or created.
More later.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Ja
Welcome to the GROUP Mal.
Can you tell us a little bit about your self. so other in the group can get to
know you?I understand you like making pens. and you know Tim Z.
That a good starting point. AT LEAST you know one person, Now Two. ;-)
Again, Welcome to the group.
C.A.G.
On Sunday, Ja
Let me be the first to welcome you to our group Mal hope you find it as
interesting as we all do
Bill
From: 'Yahoo Action(US)' via Legacy Ornamental Mills
Sent: Monday, 24 January 2022 3:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: LOM new member introduction
Hello,Thanks for accepting my application for membership in the group.Mal
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsu
Always worth a look Denson thank you, please post the link
Bill
From: 'Denson Ingram' via Legacy Ornamental Mills
Sent: Wednesday, 1 December 2021 7:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Hi gentlemen,
Don’t know is this h
thanks Jeff, at least I don't feel so alone.
So these finds maybe we could look at splitting up the machine between the
two of us. I have
several needs so if you want to message me seperate and send me the links
I'd take a look.
I'm building a Hybrid and it requires many items on the lom X 2 becaus
ttps://www.ebay.com/itm/174986834390?hash=item28be0731d6:g:zNUAAOSwGk5f4Z1a
>>
>>
>>
>> Because your only tapping plastic or at worst brass these cheap Chinese
>> taps will work
>>
>>
>>
>> I think it would be possible to make leadscrew nuts fo
Thanks.
>>
>> I'm pretty the were one of the two I found.
>>
>> I did remember that they were out of New York.
>>
>> The may even be the one that Joe Biuno referred us to as well.
>>
>> Thanks.
>>
>> Mac
>> ---
Hi Tim,
I did reach out to Curt on the rotary table. Hopefully that will work out. I
have seen a couple of other ( longer than my 900 )legacy machines for sale on
Craigslist / Facebook Marketplace with accessories including one with a rotary
table (a 1000EX for $875 and a 1500EX for $1200 ) but
/www.ebay.com/itm/174986834390?hash=item28be0731d6:g:zNUAAOSwGk5f4Z1a
>>
>>
>>
>> Because your only tapping plastic or at worst brass these cheap Chinese taps
>> will work
>>
>>
>>
>> I think it would be possible to make leadscrew nuts for t
Joe Biuno referred us to as well.
>> Thanks.
>> Mac
>> -Original Message-
>> From:
>> Sent: Nov 29, 2021 11:03 PM
>> To:
>> Subject: RE: New member introduction
>>
>>
>> Ok https://www.dependableacme.com/class/#screw
>>
math guy)
>
>
> -Original Message-
> From: Jeff Richmond
> To: legacy-ornamental-mills@googlegroups.com
> Sent: Mon, Nov 29, 2021 9:10 pm
> Subject: Re: New member introduction
>
> Yes, I am looking them over now, thank you. 👍
>
> Jeff from Co
>
>
> -Original Message-
> From: Jeff Richmond
> To: legacy-ornamental-mills@googlegroups.com
> Sent: Mon, Nov 29, 2021 9:10 pm
> Subject: Re: New member introduction
>
> Yes, I am looking them over now, thank you. 👍
>
> Jeff from Connecticut
>
> O
Hi JeffWhere in Connecticut are you from. I grew up in Farmington. Ron (the
math guy)
-Original Message-
From: Jeff Richmond
To: legacy-ornamental-mills@googlegroups.com
Sent: Mon, Nov 29, 2021 9:10 pm
Subject: Re: New member introduction
Yes, I am looking them over now, thank you. 👍
I did that with the top hats but that is just my opinion
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:0
oe Biuno referred us to as well.
>
> Thanks.
>
> Mac
> --
> --
>
> -Original Message-
> From:
> Sent: Nov 29, 2021 11:03 PM
> To:
> Subject: RE: New member introduction
>
>
>
> Ok https://www.depen
; *Sent:* Tuesday, 30 November 2021 2:50 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: New member introduction
>
>
>
> I and at least one other found it. It was not easy.
>
> I am unable to find it again - but I believe the other Group member that
> s
t; charge - on top of an already
> rather pricey piece of threaded rod!
>
> Cheers!
>
> Mac
> --
> ----------
>
>
>
> -Original Message-
> From:
> Sent: Nov 29, 2021 8:56 PM
> To:
> Subject: RE: New member introduction
>
>
>
> I remember some one on
over 20 years and we used this method where heat
could not be used because of distortion problems.
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of bulke...@mmnet.com.au
Sent: Tuesday, 30 November 2021 10:27 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE:
Bill,
Yep! Thanks.
I'm pretty the were one of the two I found.
I did remember that they were out of New York.
The may even be the one that Joe Biuno referred us to as well.
Thanks.
Mac
-Original Message-
From:
Sent: Nov 29, 2021 11:03 PM
To:
Subject: RE: New member introduction
Ok https://www.dependableacme.com/class/#screw
Third one down I think this is it
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of M.W.Foscue
Sent: Tuesday, 30 November 2021 2:50 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New member introduction
I
ed was 8 feet. The other
issue was S&H.
You might end up paying an extra "over-size" charge - on top of an already
rather pricey piece of threaded rod!
Cheers!
Mac
-Original Message-
From:
Sent: Nov 29, 2021 8:56 PM
To:
Subject: RE: New member introduction
I remember som
rnamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Jeff Richmond
> *Sent:* Tuesday, 30 November 2021 1:37 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> Thanks Bill, I
I here yah I was at it until 11:00 pm last night way to late lol.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 29, 2021 at 8:41 PM Jeff Richmond wrote:
> Agreed.
>
> Signing off until tomorrow
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:01 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> Cu
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 1:10 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New membe
t; up with my fat old face on it ha ha ha
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Tuesday, 30 November 2021 12:39 PM
&g
Jeff Richmond
Sent: Tuesday, 30 November 2021 1:37 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Thanks Bill, I wouldn’t have considered it previously but I should be able make
delrin replacements with this tool. I do not have metal milling capabilities
nt: Tuesday, 30 November 2021 12:39 PM
To: legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>
Subject: Re: New member introduction
yeah be pretty tough with family. So we do the next best thing and thats email.
Be fun to zoom with the group some
Agreed.
Signing off until tomorrow.
Jeff from Connecticut
> On Nov 29, 2021, at 9:14 PM, Tim Ziegler wrote:
>
>
> Your welcome. We seem to have a delay in the internet with all the cyber
> monday shopping slowing down the stream.
>
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler Woo
ehalf Of Tim Ziegler
> Sent: Tuesday, 30 November 2021 12:01 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: New member introduction
>
> Curt or Bill may post to that comment about the acme nuts from Delrin. They
> have taps and make their own.
> Stay tune
Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 1:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
3/4 industrial felt lol it worked
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320
;
> Bill
>
> From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Jeff Richmond
> Sent: Tuesday, 30 November 2021 12:17 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: New member introduction
>
> Thanks Tim, don’t go out of your way on my
ere I’m not sure the computer wouldn’t blow up
>> with my fat old face on it ha ha ha
>>
>>
>>
>> Bill
>>
>>
>>
>> From: legacy-ornamental-mills@googlegroups.com
>> On Behalf Of Tim Ziegler
>> Sent: Tuesday, 30 November
Your welcome. We seem to have a delay in the internet with all the cyber
monday shopping slowing down the stream.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 29, 2021 at 8:10 PM Jeff Richmond
For sure
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 29, 2021 at 8:07 PM Jeff Richmond wrote:
> Thanks Tim,
>
> A picture is a thousand words….
>
> Jeff from Connecticut
>
> On Nov 29, 2021,
;
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:55 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
Sent:* Tuesday, 30 November 2021 12:39 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> yeah be pretty tough with family. So we do the next best thing and
> thats email.
>
> Be fun to zoom with the group sometime?
>
> Kind
ll work lololol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:37 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Sub
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduct
Yes, I am looking them over now, thank you. 👍
Jeff from Connecticut
> On Nov 29, 2021, at 8:39 PM, Tim Ziegler wrote:
>
>
> Did the pix come through yet Jeff?
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
>
Thanks Tim,
A picture is a thousand words….
Jeff from Connecticut
> On Nov 29, 2021, at 8:20 PM, Tim Ziegler wrote:
>
>
> Here is how I did it.
> Let me know your thoughts. It worked for me.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> For
The ones with your thin stock steady in it did yes
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 12:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Bill did my pics come through yet
: New member introduction
yeah be pretty tough with family. So we do the next best thing and thats email.
Be fun to zoom with the group sometime?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243
You know me by now Tim I will try anything if I think it will work lololol
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 12:37 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Yeah a
Love your thin stock support Tim what the white bit made of
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Here is how I did it
-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Thanks Tim, don’t go out of your way on my account. If you happen upon them,
please send them over.
I do have some short rails so support ideas to handle the extra length/weight
are welcome.
I am still on the
hats but that is just my opinion
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:01 PM
> *To:* legacy-ornamen
t; *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 12:01 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> Curt or Bill may post to that comment about the acme nuts from Delrin.
> They have taps and make their own.
>
&g
with the top hats but that is just my opinion
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 12:01 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Curt or Bill may post to that
Did the pix come through yet Jeff?
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Nov 29, 2021 at 7:16 PM Jeff Richmond wrote:
> Thanks Tim, don’t go out of your way on my account. If you happen upon
rote:
> Lol at times here I wish I could
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 30 November 2021 11:58 AM
> *To:* legacy-ornamental-mill
esday, 30 November 2021 11:57 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> That's pretty impressive plus you didn't have to chase threads afterwards
> right?
>
> Kind Regards,
>
>
>
> Timothy J. Z
Lol at times here I wish I could
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 11:58 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Yeah The more i think about it the more I think
thread exactly lined up.
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Tuesday, 30 November 2021 11:57 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
That's pretty impressive plus you didn't hav
Yeah, I'm pretty sure you can buy longer lengths it will just be who will
ship it. most have limits but motor freight would be an
option or having Grainger order in and do a will call pick up.
Pic's should be there shortly I sent 4.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14
Thanks Tim, don’t go out of your way on my account. If you happen upon them,
please send them over.
I do have some short rails so support ideas to handle the extra length/weight
are welcome.
I am still on the fence on joining two lead screws or finding a longer
continuous one verses flipping
d this
> method where heat could not be used because of distortion problems.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 30 No
> *On Behalf Of *
> bulke...@mmnet.com.au
> *Sent:* Tuesday, 30 November 2021 10:27 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: New member introduction
>
>
>
> No I drilled one side and turned a pin on the other and glued them
> togeather with a
ooglegroups.com> *On Behalf Of *Jeff Richmond
> *Sent:* Tuesday, 30 November 2021 10:07 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> Thanks for the input, Bill
>
>
>
> So the join was not temporary, I ass
OK I will dig a bit and come up with them.
I finished the job and took it down until the next time.
Just keep the rails and brackets handy for the next time and push the
machine back
to its home.
Like I said I flipped my parts.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 1
light strokes with a file and the joint was just
about perfect like I said its hard to even find
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Jeff Richmond
Sent: Tuesday, 30 November 2021 11:14 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member
; Sent: Tuesday, 30 November 2021 10:27 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: New member introduction
>
> No I drilled one side and turned a pin on the other and glued them togeather
> with a special industrial locktight it has never moved since the join
2021 10:07 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Thanks for the input, Bill
So the join was not temporary, I assume you welded them together and smoothed
the transition?
Jeff from Connecticut
On Nov 29, 2021, at 5:03 PM, bulke
t; Bill
>
> From: legacy-ornamental-mills@googlegroups.com
> On Behalf Of Jeff Richmond
> Sent: Tuesday, 30 November 2021 8:02 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: New member introduction
>
> Interesting.
>
> When extending using
Hi Tim,
Pictures would be great, if you have them.
Jeff from Connecticut
> On Nov 29, 2021, at 4:11 PM, Tim Ziegler wrote:
>
>
> Hey Jeff,
> I actually made two angle iron brackets and used several oval LOM connectors
> to attach the extra LOM rail and then supported the far end with a ro
When I extended my mill I joined 2 leadscrews together
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Jeff Richmond
Sent: Tuesday, 30 November 2021 8:02 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
Interesting.
When
To jump the hurdle of to short of acme I just flipped the part over and
only using the extension for the tail stock.
Pretty sure that's the only practical way to do it.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243
Hey Jeff,
I actually made two angle iron brackets and used several oval LOM
connectors
to attach the extra LOM rail and then supported the far end with a roller
stand modified
with a flat cross piece. It worked excellent and I did not have to put
holes in walls
like other's did lol.
I can try to
Interesting.
When extending using rails, how is the acme screw addressed? Are you installing
a longer one or joining them in some manner?
Jeff from Connecticut
> On Nov 28, 2021, at 10:56 PM, Tim Ziegler wrote:
>
>
> Curts right I added a little over 2 foot of extra rail to runs some 8 fo
Thanks Curt, I will have to research these options. I don’t have any metal
milling capability but definitely something to think about.
Jeff from Connecticut
> On Nov 28, 2021, at 9:16 PM, 'Curt George' via Legacy Ornamental Mills
> wrote:
>
>
> Hey Jeff
>
> I think you will find a few Shop
keep going Tim
>
>
>
> Bill
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 29 November 2021 3:16 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New m
I think making mods is almost as much fun as
> using the mill itself lol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 29 November 2021 3:27 PM
George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Monday, 29 November 2021 3:16 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New member introduction
>
>
>
> I cant wait to see it when its done! looks
11:35:21 PM EST,
wrote:
I totally agree keep going Tim
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 29 November 2021 3:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
I cant wait to see it when its done!
Baby steps Tim baby steps I think making mods is almost as much fun as using
the mill itself lol
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 29 November 2021 3:27 PM
To: LOM Group
Subject: Re: New member introduction
thanks Curt yes I
I totally agree keep going Tim
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 29 November 2021 3:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New member introduction
I cant wait to see it when its done! looks Great!!!
I still
olol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 29 November 2021 3:02 PM
> *To:* LOM Group
> *Subject:* Re: New member introduction
>
>
>
>
thanks Curt yes I take all advice into consideration and keep moving
forward.
I'm getting super stoked to get more done then I have time for but. Its
coming.
Thanks again for the encouragement.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-2
Not before they sell a ball bearing one to me Tim lolol
Bill
From: legacy-ornamental-mills@googlegroups.com
On Behalf Of Tim Ziegler
Sent: Monday, 29 November 2021 3:02 PM
To: LOM Group
Subject: Re: New member introduction
Hey that looks pretty slick and is giving me idea's, b
I cant wait to see it when its done! looks Great!!! I still think you should
make your own head and tailstock For you Hybrid, Tim.Use a 5/8 shaft, then all
your Shop Smith adaptors will fit it. The 5/8" shaft is smaller so ball
bearings and everything will work with in the framework you have.I
Hey that looks pretty slick and is giving me idea's, but of course if
someone would sell me a
head stock and tail stock my search would be over and I could finish my
HYBRID right Curt.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 s
Jeff don't feel alone I've only owned LOM's now 3 maybe 4 years. but found
the group right out of the shutte.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 28, 2021 at 7:46 PM Jeff Richmond wrote
Nice! ;-)
C.A.G.
On Sunday, November 28, 2021, 10:52:14 PM EST, Tim Ziegler
wrote:
Not a lot of progress but at least I had it fired up lol
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Sun, Nov 28, 2
Curts right I added a little over 2 foot of extra rail to runs some 8 foot
plus on my 1200 worked great just
needed more supports.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 28, 2021 at 7:19 P
Hey Stranger great to here from you Mike.
Speaking of the Wood Chuck I was playing on mine today.
Yes as I looked there are some things about it I really like and now super
glad
I keep it. I found another only 10 miles from me but not sure if he's
willing to
part with it. Drive and all just like m
https://www.routerforums.com/forums/woodworking-classifieds.16/
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 28, 2021 at 4:09 PM Jeff Richmond wrote:
> Hi Tim,
>
> Thanks for the welcome. I can
Thanks Jeff,
Yes I had to search for a rotary table too and found one on the Router
Forum I belong too.
However trying to get any response on there is like pulling teeth. Like
Curt says "Crickets"
I'd have to check the miles on that one. Wow.
But I sent my kids all the way to Texas for my first LO
I had forgotten I do like that one
Bill
From: 'Curt George' via Legacy Ornamental Mills
Sent: Monday, 29 November 2021 1:26 PM
To: 'Curt George' via Legacy Ornamental Mills
Subject: Re: New member introduction
Just found Joe's tailstock. (Pretty Slick
Well thats certainly good to hear. Let er fly Jeff.
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Sun, Nov 28, 2021 at 2:50 PM Jeff Richmond wrote:
> Thanks for the links Curt, I will have to check thos
Thanks again Curt, yes that makes sense and is pretty creative use of a hole in
the garage wall. Lol
Even with my limited use, a live center is definitely an upgrade I see a need
for on the Legacy. I will have to check compatibility with the shopsmith I
have. I use that as a lathe from time to
ntal-mills@googlegroups.com
Subject: Re: New member introduction
Hello again Jeff
Your 900 can turn a 8' post if you only turn 4' at a time. It will take some
slight modifications, like removing your tailstock on the legacy and using some
time of object to hold the end of your stock.
Woops. I missed something.
4' cutting at a time. and then flipping the stock over to cut the other 4'. Is
what I thought I wrote. (hope this helps?)
C.A.G.
On Sunday, November 28, 2021, 08:19:14 PM EST, 'Curt George' via Legacy
Ornamental Mills wrote:
Hello again Jeff
Your 900 can
Hello again Jeff
Your 900 can turn a 8' post if you only turn 4' at a time. It will take some
slight modifications, like removing your tailstock on the legacy and using some
time of object to hold the end of your stock. I small hole in the wall in my
garage did it first, to hold my live center.
Thanks for the background Mike and the warm welcome. I think I saw some snow
coming down today.
I have a goal of being able to do 8’ posts in the future (not on my stock 900)
but a 15’ post must be a sight to behold and a real bear to move around. I am
not familiar with the previous generation
1 - 100 of 273 matches
Mail list logo
