Thank you Joe.I found an E-bay unit very much like what you listed a while
back. I am glad to hear that I was on the same track as your modification. YOU
Have come up with one very neat idea using this tail stock. I think it offers a
lot to your machine. Hopefully someone else out there will al
hey curt!
here's the story on the tailstock...I knew I wanted a
tailstock that had a square-ish design, as this would allow for better
mounting and alignment surfaces...I saw on ebay just about the exact thing
that would work perfectly(it was an atlas/craftsman piece from a 6" meta
On Thursday, November 9, 2017 9:18 AM, 'Curt George' via Legacy Ornamental
Mills wrote:
Hello Everyone. (Joe) can you tell us more about your tail stock?I know this is
an old picture, but where did you find a small alum. tail stock to mount in/on
your Legacy tail stock???
Although I
Hello Everyone. (Joe) can you tell us more about your tail stock?
I know this is an old picture, but where did you find a small alum. tail
stock to mount in/on your Legacy tail stock???
Although I do NOT need it on my 1000ex I do have an old 500 unit that I am
playing around with re-building, a
talk, talk, talk, where's the beef?? :>)
On Sunday, November 5, 2017 at 10:33:01 AM UTC-6, russ veinot wrote:
>
> i still use my original tailstock with the cam tensioner. i am curious if
> anyone has this same set up? was it used on other models (which models)?
> if you changed your, how? i
@googlegroups.com
Subject: RE: tail stock on the LOM
Ok I made it on my metal lathe for my model 900 mill.
Using 2 bearings so it would be more stable when slipped over the existing
mills dead centre
And yes the ID does mach the shaft of the mills dead centre.
Bill
From: legacy
-mills@googlegroups.com] On Behalf Of Russ Veinot
Sent: Monday, 6 November 2017 1:49 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: tail stock on the LOM
3 questions (approximately),
who made the live center? Was it machined special?
Why showing 2 bearings? Does it need both
@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Sunday, November 05, 2017 6:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: tail stock on the LOM
This is how i solved the live centre problem with my lom it just slips on
Bill
From: legacy-ornamental-mills@googlegroups.com
Thanks Mike!
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email t
ith I know that has a
1/2 -24 thread on the live center.) It should be in our archives..?
C.A.G.
- Original Message -
From: "Russ Veinot"
To: legacy-ornamental-mills@googlegroups.com
Sent: Sunday, November 5, 2017 5:13:41 PM
Subject: RE: tail stock on the LOM
If your tai
Ok, been following the group but not commenting...a lot going on at work and
personally...one thing to note here is that I have to move my shop to a new
location... so we will see how well my beast breaks down and transports...The
base, the two,joined machines(1800 & 1200), the sopport cabinet a
] On Behalf Of CURTIS GEORGE
Sent: Sunday, November 05, 2017 3:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: tail stock on the LOM
my old 1000ex has a De-sta-co clamp on the tail stock with a MT-2 .There is not
a lot of difference between the cam and ... but I like what I have
5, 2017 11:33:00 AM
Subject: tail stock on the LOM
i still use my original tailstock with the cam tensioner. i am curious if
anyone has this same set up? was it used on other models (which models)? if you
changed your, how? i would like to change mine, but maybe not have to reinvent
the wheel :
till I start telling the same joke over and over.
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Sunday, November 05, 2017 11:25 AM
To: Legacy Ornamental Mills
Subject: Re: Tail stock on the LOM
Russ
Yes th
l Message-
> From: russ veinot
> Sent: Nov 5, 2017 11:33 AM
> To: Legacy Ornamental Mills
> Subject: tail stock on the LOM
>
> i still use my original tailstock with the cam tensioner. i am curious if
> anyone has this same set up? was it used on other models (which m
017 11:33 AM
To: Legacy Ornamental Mills
Subject: tail stock on the LOM
i still use my original tailstock with the cam tensioner. i am curious if anyone has this same set up? was it used on other models (which models)? if you changed your, how? i would like to change mine, but maybe not have to rei
i still use my original tailstock with the cam tensioner. i am curious if
anyone has this same set up? was it used on other models (which models)?
if you changed your, how? i would like to change mine, but maybe not have
to reinvent the wheel :>) looking for ideas !!
--
You received this
17 matches
Mail list logo