Hi everyone,
I’m glad to see that this topic is up for discussion once again.
On March 29, 2008 I wrote:
It seems to me that we have a problem, i.e. how do we register relatives
that have become partners through the various statues (laws) in effect in
the following Countries and States of the
I see that the problem in Legacy, and hence why it would take a re-write of
the coding for Legacy, is that whilst we can change the wording so that reports
read correctly Legacy will still show one partner as being a male and one a
female on the individual information screen. As far as a
On 16/05/2011 00:52, Sherry/Support wrote:
1. Rename the Legacy family file to replace the .FDB extension with
the .MDB extension.
As has been said here many times before, and will probably need saying
many times again, there is no need to change the file extension when
opening a Legacy Family
Brian,
The reason this was a serious problem for me was because I required a PDF/A-1b
ver. 1.3 file to send to LuLu.com for publishing. I believe Legacy produces a
PDF ver. 1.2 without /A-1b thus fonts can't be properly embedded in the file.
I am using PDFCreator as the printer device. This
Ken,
I don't have this problem. Legacy version 7.5.0.67 on Vista 64. Are you seeing
this problem on preview or on a printed paper copy? I have not been able to
reproduce your problem using. My TOC settings on the Additional TAB are Bold
and Use leaders
Example 1:
I have a Title Page,
Have run a 48 page report complete with citations for each generation. Table
of contents covered 2 pages and the report also had the index of names (6
pages) at the end.
All pages were numbered correctly and jumping from section to section, the
pages displayed what was in the table of
The problem you reported has been tested and is confirmed. A report has
been recorded in our problem tracking system so this can be fixed. Thank
you for helping us make Legacy a better program for everyone.
In fact I created two problem reports. One for the standalone report and
one for the
Good Afternoon,
Yesterday I started experiencing/noticed something unusual with Legacy.
First I am using Version 7.4.0.45 on a windows xp laptop.
When I attempt to shut down the individual's information page by clicking on
the red X or the save buttons; the individual notes page appears.
I am
On Mon, 16 May 2011 13:14:03 -0700 (PDT), Tom Watkins
tomsgeneal...@yahoo.com wrote:
Yesterday I started experiencing/noticed something unusual with Legacy.
First I am using Version 7.4.0.45 on a windows xp laptop.
When I attempt to shut down the individual's information page by clicking on
Thanks Dennis
That worked, but since I have changed nothing recently; it aroused my
curiosity. Particularly since I use the program every day and found it most
annoying.
[]
Tom Watkins
Eau Gallie, Florida
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Thank you Evert, Laird Gene Brian/Support for taking the time to assist me
with the
Table of Contents page numbering problem as outlined in my initial posting.
Although
Laird and Gene were unable to duplicate the situation it was reassuring to know
that Evert
and Brian at support was able
Tom,
Take another look, there is NO red X it is a White X on a red button.
You are NOT alone on this, the eyes are playing a trick with our brains. [smile]
Thanks,
David C Abernathy
Email disclaimers
This message
I think you must install Windows on your Mac and then you can use Legacy.
There is a program on your Mac or you can add one that allows you to run
Windows on it.
You must buy a copy of windows to install it on your machine.
Thanks,
David C Abernathy
Email disclaimers
On Mon, 16 May 2011 15:04:23 -0700, David C Abernathy
da...@schmeckabernathy.com wrote:
Take another look, there is NO red X it is a White X on a red button.
You are NOT alone on this, the eyes are playing a trick with our brains.
I would think this would depend on how you have configured
Yep David,
My button is red with a white X. Thank Goodness Dennis could correctly
interpret my inadequate descriptions. :-)
[]
Tom Watkins
Eau Gallie, Florida
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages after Nov. 21 2009:
There is no Mac version of Legacy, however;
If you have a Mac with the Intel chipset and the new OS-X, you can
install Windows, either under Parallels, Bootcamp or Fusion and you will
be able to run Legacy with no problem.
If you have an older version of the Mac OS, you will need to install a
Thanks Robert
On Sun, May 15, 2011 at 8:06 PM, Robert E. Carneal
kentuckygenealog...@gmail.com wrote:
Select Do not change what I enter in your customizations. Be careful,
though, it really does just that. Smith could be entgered as Smtih, and
Legacy will accept it. You would need to be more
You would need to run something like Parallels which is what I do
myself.
Once setup it is quite easy to use, and Legacy can be run from there.
You can also drag an drop files from Parallels to Os if it is setup to
do so.
Cheers
Gwen
On 17/05/2011, at 10:06 AM, David C Abernathy wrote:
I think
First, I create the citation using source writer. Select the text of the
citation and hit cntl-c to copy. (If I am going to use the citation many times
I save a model of it as a text file.) Then, in the windows picture library I
right click the photograph and select properties. Click the
19 matches
Mail list logo