Steve,
That simply sounds like a bad or incomplete install. I would reinstall.
Ron Ferguson
http://www.fergys.co.uk
-Original Message-
From: Steve Hayes
Sent: Wednesday, September 9, 2015 6:49 AM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
On 6 Sep
http://www.fergys.co.uk/
From: Stu and Priscilla Fanning
Sent: Monday, September 7, 2015 9:26 PM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
Here is a dumb question before the group is finished with the discussion of the
check/repair. I am fairly new to Legacy
On 9 Sep 2015 at 8:11, Steve Hayes wrote:
> I just installed the new version, and it would not run at all.
>
> Eventually I did a system restore to get the old one back.
Just in case it helps someone else, I've now got the new version running.
There are three things I did differently from yester
-Opprinnelig melding-
From: Jenny M Benson
Sent: Wednesday, September 09, 2015 3:28 PM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
On 09/09/2015 07:11, Steve Hayes wrote:
> On 6 Sep 2015 at 16:55, Gene C. Harris wrote:
>
>> >I just
-Opprinnelig melding-
From: Jenny M Benson
Sent: Wednesday, September 09, 2015 3:28 PM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
On 09/09/2015 07:11, Steve Hayes wrote:
> On 6 Sep 2015 at 16:55, Gene C. Harris wrote:
>
>> >I just
Sorry to hear about your troubles.
I have loaded .516 and .517 without any problems at all.
Bob
-Original Message-
From: Steve Hayes [mailto:hayes...@telkomsa.net]
Sent: Tuesday, September 08, 2015 10:49 PM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
On 09/09/2015 07:11, Steve Hayes wrote:
> On 6 Sep 2015 at 16:55, Gene C. Harris wrote:
>
>> >I just loaded version .516 yesterday and already the 1st thing I did brought
>> >an error and shutdown.
> I just installed the new version, and it would not run at all.
>
> Eventually I did a system restor
On 6 Sep 2015 at 16:55, Gene C. Harris wrote:
> I just loaded version .516 yesterday and already the 1st thing I did brought
> an error and shutdown.
I just installed the new version, and it would not run at all.
Eventually I did a system restore to get the old one back.
--
Keep well,
Steve Ha
On 6 Sep 2015 at 16:55, Gene C. Harris wrote:
> I just loaded version .516 yesterday and already the 1st thing I did brought
> an error and shutdown.
I just installed the new version, and it would not run at all.
Eventually I did a system restore to get the old one back.
--
Keep well,
Steve Ha
AM
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
The only time I've seen a file go over the Access limit was a few years back
when the person was a "name gatherer". He had been importing any gedcom he
could find and eventually crashed Legacy.
When I tried
notes section. Is there any reason for me to use
check/repair?
Priscilla
From: Gene C. Harris
To: legacyusergroup@LegacyUsers.com
Sent: Monday, September 7, 2015 4:17 PM
Subject: RE: [LegacyUG] Error in new version
Thank you Michele. Good explanation and the
e
From: Nan Bailey
Date: 07/09/2015 10:42 PM (GMT+00:00)
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
Just my tuppence worth on this. This positive comment is good to see Sally. As
a new user of Legacy, I joined this discussion group to help learn
Nan, have you checked out the Webinars that Legacy offers for free?
They are wonderful & if you miss the live version you can still catch it
free for a while afterwards.
I especially like the ones that show how to use the Legacy software...it
can do so much.
Another plus is that if you do need he
Just my tuppence worth on this. This positive comment is good to see Sally.
As a new user of Legacy, I joined this discussion group to help learn
better how to use it. But, all I see are so many problems, issues and
complaints, that I was seriously thinking of abandoning Legacy and buying
something
e any reason for me to use
check/repair?
Priscilla
From: Gene C. Harris
To: legacyusergroup@LegacyUsers.com
Sent: Monday, September 7, 2015 4:17 PM
Subject: RE: [LegacyUG] Error in new version
Thank you
Michele. Good explanation and the check/repair worked. I'll start doing
do it because Conscience tells him it is
right."
> From: mich...@legacyfamilytree.com
> To: legacyusergroup@LegacyUsers.com
> Subject: RE: [LegacyUG] Error in new version
> Date: Mon, 7 Sep 2015 07:43:45 -0400
>
> The clue was “not an index in this table” The data wa
The only time I've seen a file go over the Access limit was a few
years back when the person was a "name gatherer". He had been
importing any gedcom he could find and eventually crashed Legacy.
When I tried to look at the file in Access there were a gazillion
"unknown" individuals, not to mention
group@LegacyUsers.com
> Sent: Monday, September 7, 2015 7:43 AM
> Subject: RE: [LegacyUG] Error in new version
>
> The clue was “not an index in this table” The data wasn’t lining up
> correctly. I always like to think of a check/repair like the Windows
> “defrag” and “chkds
Close at 5:00 PM
45.2397 N long: 76.0991 W Elv 137 M UTM
Don't Forget to Save the Stamps
From: Michele/Support
To: legacyusergroup@LegacyUsers.com
Sent: Monday, September 7, 2015 7:43 AM
Subject: RE: [LegacyUG] Error in new version
The clue was “not an index in this table” The d
. Harris [mailto:genechar...@outlook.com]
Sent: Sunday, September 6, 2015 5:47 PM
To: legacyusergroup@LegacyUsers.com
Subject: RE: [LegacyUG] Error in new version
Worked. What happened?
Gene
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages after Nov
Well said.
Bob
From: Ronald Bernier [mailto:ronaldbern...@icloud.com]
Sent: Sunday, September 06, 2015 6:26 PM
To: legacyusergroup@LegacyUsers.com
Subject: RE: [LegacyUG] Error in new version
CE, since you feel that you repeatedly need to voice your negative anti-legacy
comments, why
the program.
Ron Bernier
From: CE WOOD [mailto:wood...@msn.com]
Sent: Sunday, September 6, 2015 9:07 PM
To: legacyusergroup@LegacyUsers.com
Subject: RE: [LegacyUG] Error in new version
I am so glad for you, but the bug list is long, well-documented, and makes it
impossible to meet deadlines
ed. Not being able to earn your living for that
> long because of old and new bugs? Please.
>
>
> CE
>
> --------
> Date: Sun, 6 Sep 2015 19:41:25 -0500
> From: hee...@usit.net
> To: legacyusergroup@LegacyUsers.c
My version of 8.0.0.516 work just fine when I go in change the child status.
You may have something wrong in your database, better do a check repair.
Make a backup before you do a check repair.
___
Leon Chapman
chap...@gmail.com
-
On Sun, Sep 6, 2015 at 4:59 PM, CE WOOD wrote:
> "It seems e
et
To: legacyusergroup@LegacyUsers.com
Subject: Re: [LegacyUG] Error in new version
Got to agree...this is a great
program & I've had few problems over the years...and those
were quickly resolved.
I think they are doing a great job.
Sally
On
sergroup@LegacyUsers.com
Subject: RE: [LegacyUG] Error in new version
" It seems every time that the programmers make a change, they mess
something
else up. It's as if they don't run through the program and fully test
everything
except what they change. I retired as a systems developer and if
WOOD
> *Sent:* Sun Sep 06 16:59:37 PDT 2015
> *To:* legacyusergroup@LegacyUsers.com
> *Subject:* RE: [LegacyUG] Error in new version
>
> "It seems every time that the programmers make a change, they mess
> something else up. It's as if they don't run through th
_
From: CE WOOD
Sent: Sun Sep 06 16:59:37 PDT 2015
To: legacyusergroup@LegacyUsers.com
Subject: RE: [LegacyUG] Error in new version
"It seems every time that the programmers make a change, they mess something
else up. It's as if they don't run through the program and fully test
ev
"It seems every time that the programmers make a change, they mess something
else up. It's as if they don't run through the program and fully test
everything except what they change. I retired as a systems developer and if we
had turned out stuff like this, we would be out of a job."
AMEN!
How
ime when
one must take a position that is neither safe, nor politic, nor
popular,
but he must do it because Conscience tells him it is
right."
> From: mich...@legacyfamilytree.com
> To: legacyusergroup@LegacyUsers.com
> Subject: RE: [LegacyUG] Error in new version
> Date: Sun,
Yes, I agree with you. I was a system analyst, If they let stuff through
with as many errors as this crewBut then again, I worked with hundreds of
programmers and we charged $$$thousands$$$ for the code.
I think that legacy is pretty good, as a matter of fact I think its better
that t
Gene,
Run a check/repair on your file. Select FILE > FILE MAINTENANCE >
CHECK/REPAIR. Click PROCEED. If an error is found select NO so that the
check/repair will continue. If there are errors found, run the check repair
again until there are no errors. If there are any errors that Legacy ca
32 matches
Mail list logo
