2016-08-21 3:19 GMT+02:00 Hwaen Ch'uqi :
> Greetings All,
>
> The following code results in the second arpeggio sign running into
> the preceding D-flat in the left hand. As there is very little room to
> move the arpeggio to the right before running into the following
>
Hi Hwaen,
Possibly?
\once \override Arpeggio.padding = #8
\arpeggio
Not optimal, but it does work.
Andrew
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Greetings All,
The following code results in the second arpeggio sign running into
the preceding D-flat in the left hand. As there is very little room to
move the arpeggio to the right before running into the following
accidentals (also in the left hand), is there another spacing solution
to this
Greetings All,
I would like to temporarily influence the vertical spacing of a piece,
idally using this form:
\override StaffGrouper.staff-staff-spacing.padding = #5
In the NR for version 2.19.36, this type of command is shown in a
\with block, resulting in the entire score spaced
Good day to all of you! I'd need a little help for a spacing problem with
Lilypond.
Is it possible the setting the vertical spacing between systems and staves for
each individual page, in a score?
I've googled around, but I've no found an answer.
Thanks and regards.
Hello Ivan,
Am 22.06.2015 um 12:35 schrieb Ivan Arreghini:
Good day to all of you! I'd need a little help for a spacing problem
with Lilypond.
Is it possible
(Virtually everything is _possible_ in LilyPond – only some things are
more difficult than others :-) )
the setting the vertical
this message in context:
http://lilypond.1069038.n5.nabble.com/Vertical-spacing-question-tp178079p178081.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo
Greetings All,
Is there a way to influence the spacing between each flat of a
double-flat? I would like to increase the distance between the two.
Thank you in advance for any help.
Hwaen Ch'uqi
___
lilypond-user mailing list
lilypond-user@gnu.org
/mailman/listinfo/lilypond-user
If you reply to this email, your message will be added to the discussion
below:
http://lilypond.1069038.n5.nabble.com/Spacing-question-tp169299.html
To start a new topic under User, email ml-node+s1069038n...@n5.nabble.com
To unsubscribe from Lilypond
On Mon, Dec 23, 2013 at 10:14 AM, Karol Majewski karo...@wp.pl wrote:
Hi Eluze,
now I have found that in my example it should be:
\override Score.SpacingSpanner #'uniform-stretching = ##t
insted of:
\override SpacingSpanner #'uniform-stretching = ##t
:)
Now, uniform-stretching
--
View this message in context:
http://lilypond.1069038.n5.nabble.com/hotrizontal-spacing-question-tp156216p156435.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org
Hi Eluze,
now I have found that in my example it should be:
\override Score.SpacingSpanner #'uniform-stretching = ##t
insted of:
\override SpacingSpanner #'uniform-stretching = ##t
:)
Now, uniform-stretching appears to be the right solution.
___
I discovered this setting yesterday. Then added it to the main layout file and
compiled some of my scores (more complex). Everything was fine. Perhaps
NoteHead.extra-spacing-height = #'(-inf.0 . +inf.0) should be set as default in
Lily?
___
Unfortunately uniform-stretching doesn't work here.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
/hotrizontal-spacing-question-tp156216p156256.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
If you mean this:
{
\override SpacingSpanner #'uniform-stretching = ##t
\set Score.proportionalNotationDuration = #(ly:make-moment 1/200)
\clef bass \times 4/6 { c16 e16 a,16 b,16 g,16 e16 }
\times 4/6 { c16 e16 g,16 b,16 g,16 e16 }
\times 4/6 { c16 e16 g,16 b,16 g,16 e16 }
\times 4/6
.nabble.com/hotrizontal-spacing-question-tp156216p156326.html
Sent from the User mailing list archive at Nabble.com.
___
lilypond-user mailing list
lilypond-user@gnu.org
https://lists.gnu.org/mailman/listinfo/lilypond-user
Hi.
Here, even though all optical-spacing features are disabled, spacing is still
uneven:
\version 2.17.97
{
\override ScoreNoteSpacing.same-direction-correction = #0
\override Score.NoteSpacing.stem-spacing-correction = #0
\override Score.StaffSpacing.stem-spacing-correction = #0
OK, got it.
\override NoteHead.extra-spacing-height = #'(-inf.0 . +inf.0)
is what I was looking for.
Dnia 20-12-2013 o godz. 23:58 Karol Majewski napisał(a):
Hi.
Here, even though all optical-spacing features are disabled, spacing is
still uneven:
\version 2.17.97
{
\override
Karol Majewski karolm2 at wp.pl writes:
I want all off the stems in tuplet to be spaced evenly. How to achieve
this?
If anybody else runs in to this question, there is an option for this
called uniform-stretching described in Notation Reference section
4.5.5 Proportional notation
Thanks again for the help. I have yet another question. :)
I am notating something for viola and piano. The piano has three staves,
the middle of which is only used for one measure, and is before and
afterward invisible. So the setup is like this:
\new Staff { }
\new PianoStaff
\new Staff {
Mischa Falkenburg wrote:
systems-per-page
max-systems-per-page
min-systems-per-page
ragged-last-bottom
I've been searching through the documentation, and the index for
same...but I don't see any reference to this. Explain, please?
Mischa,
Don't forget to use reply to
Mark Polesky wrote:
Mischa Falkenburg wrote:
systems-per-page
max-systems-per-page
min-systems-per-page
ragged-last-bottom
I've been searching through the documentation, and the index for
same...but I don't see any reference to this. Explain, please?
Mischa Falkenburg wrote:
Mark, thanks for your help (ie. Reply to ALL)
My question would be:
WHERE do I plug in the
\paper {
ragged-last-bottom = ##t
}
I normally put the \paper block right after the \header block in my
scores. In the example you give below, just put it after your
Francisco Vila wrote:
2009/4/22 Carl D. Sorensen :
I think you want to set system-count.
Maybe you could play with
systems-per-page
max-systems-per-page
min-systems-per-page
ragged-last-bottom might do the trick too.
- Mark
Hello All,
I'm using version 2.12.1, and my piece utilizes a GrandStaff with 6 Staffs.
The .pdf file generated shows all the pages, except for the final page,
with a big space between two GrandStaffs.
I would like to modify the spacing so that three GS's would show on each
page. Is this
On 4/22/09 9:13 AM, Mischa Falkenburg
because_producti...@myfairpoint.net wrote:
Hello All,
I'm using version 2.12.1, and my piece utilizes a GrandStaff with 6 Staffs.
The .pdf file generated shows all the pages, except for the final page,
with a big space between two GrandStaffs.
I
2009/4/22 Carl D. Sorensen c_soren...@byu.edu:
I think you want to set system-count.
Maybe you could play with
systems-per-page
max-systems-per-page
min-systems-per-page
as well. Not available until next release, though.
--
Francisco Vila. Badajoz (Spain)
www.paconet.org
Am 03.12.2008 um 22:59 schrieb Neil Puttock:
2008/12/3 james [EMAIL PROTECTED]:
I'm sorry, \bookpart is new to me, and I don't find it when I
search for it
in the one big page option. Where can I learn more about this?
It's hot off the press. :)
Here are some links from the 2.11.65
Le 4 déc. 08 à 21:25, james a écrit :
I'm having some difficulty. So far, in a score that compiles fine
without \bookpart, I only get bus errors when I try to use
\bookpart. I've tried having just one \score in the \bookpart, I've
tried having all of them in \bookparts. The example from
I have a question about vertical spacing between systems of a single
score inside a book. how do I access page0limit-inter-system-space
inside a \layout block? I want those settings only for a single score.
___
lilypond-user mailing list
Hi James,
2008/12/3 james [EMAIL PROTECTED]:
I have a question about vertical spacing between systems of a single score
inside a book. how do I access page0limit-inter-system-space inside a
\layout block? I want those settings only for a single score.
I think you'll have to use \bookpart,
Am 03.12.2008 um 22:41 schrieb Neil Puttock:
Hi James,
2008/12/3 james [EMAIL PROTECTED]:
I have a question about vertical spacing between systems of a
single score
inside a book. how do I access page0limit-inter-system-space inside a
\layout block? I want those settings only for a single
2008/12/3 james [EMAIL PROTECTED]:
I'm sorry, \bookpart is new to me, and I don't find it when I search for it
in the one big page option. Where can I learn more about this?
It's hot off the press. :)
Here are some links from the 2.11.65 docs:
Thomas Scharkowski wrote:
Hello list,
in LilyPond 2.7.12 Windows native I set annotatespacing=##t and
notice a space following headsep which is not labeled. Can I access
this space somehow?
I think this extra space was not there in 2.7.10 IIRC.
you're looking for pagetopspace, which
pagetopspace is mentioned in the index (web documentation 2.7.14) but
I could not find it elsewhere.
Thomas
Thomas Scharkowski wrote:
Hello list,
in LilyPond 2.7.12 Windows native I set annotatespacing=##t and
notice a space following headsep which is not labeled. Can I
access this
Hello list,
in LilyPond 2.7.12 Windows native I set annotatespacing=##t and
notice a space following headsep which is not labeled. Can I access
this space somehow?
I think this extra space was not there in 2.7.10 IIRC.
From above I have:
topmargin
headsep
- unlabeled space -
Y-extent (of the
Sent: Monday, August 01, 2005 7:04 PM
To: lilypond-user Mailinglist
Subject: Yet another vertical spacing question
Anyone have any idea what's going on with the space between the voice and
the piano staves in the opening of this bit of Mozart?
Clearly the first system is using the spacing
Mats Bengtsson wrote:
See http://lists.gnu.org/archive/html/bug-lilypond/2005-06/msg00210.html
/Mats
Han-Wen Nienhuys wrote:
Ah,
but this is a bug, really. Only the staves should be kept on the first
system, but not the lyrics lines and chord names.
Here's the executive summary
Mats Bengtsson wrote:
See http://lists.gnu.org/archive/html/bug-lilypond/2005-06/msg00210.html
/Mats
Ah,
but this is a bug, really. Only the staves should be kept on the first
system, but not the lyrics lines and chord names.
--
Han-Wen Nienhuys - [EMAIL PROTECTED] -
Anyone have any idea what's going on with the space between the voice
and the piano staves in the opening of this bit of Mozart?
Clearly the first system is using the spacing of the *second* system,
which looks kinda insane given that the second system has 3 stanzas
while the first system has
[EMAIL PROTECTED] writes:
Hi folks,
this question is probably related to the Shifting text markup... thread.
So here it goes:
Is there a possibility to insure that the chord symbols are properly spaced?
When a line in the score gets crammed, something saying:
F+5/B Bbmaj7
Hi folks,
this question is probably related to the Shifting text markup... thread.
So here it goes:
Is there a possibility to insure that the chord symbols are properly spaced?
When a line in the score gets crammed, something saying:
F+5/B Bbmaj7
easily mutates to:
43 matches
Mail list logo