Apologies -- there were some problems getting the info onto the
distribution media. The relevant text follows. John Ehrman
(-- Referenced Note Follows )
> Date:Thu, 8 Jun 2006 08:42:16 -0700
> From:"Spann, Elizebeth (Betsie)" <[EMAIL PROTECTED]>
>
>
The third quarter meeting of the Chicago Area VM (and Linux)
Enthusiasts will be held on Thursday, June 22, 2006.
--
Meeting Location:
This quarter's meeting will be held at the Hewitt Associates ' West
Campus' at Four Overlook Point in the Lincolnshire Corporate Center.
The meeting w
>
> And maybe it's just plain ol' broken. *I* don't know. :-) Hopefully the
> Developerworks folks will post back soon.
>
I may be wrong here since I can't try it, but I think it is broken. The
replace_char() routine should probably be replacing ALL dashes with 0x0a
characters. As coded, it'
I could read the headers and trailers of each of the sections but not
the PDFs themselves. When I found the trailer for the rpm file, I just
backed it up and gave the tape to zLinux and dded the rpm. Since then
I've been told by a couple of people to look at the Dignus Systems/ASM
product for zTPF
I'm curious. What format was the tape in? Tar, cpio, something else?
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Spann, Elizebeth (Betsie)
Sent: Friday, June 09, 2006 2:38 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: HLASM on zLinux insta
If you want your Linux guest to see two CPUs, you need to define two in
the CP Directory.
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Massimiliano Belardi
Sent: Friday, June 09, 2006 2:08 PM
To: LINUX-390@VM.MARIST.EDU
Subject: INTRA_PARALL
Betsie,
IBM has also announced at the TPF User's Group (in Miami I believe,
it was two or three TPFUG's ago) that they would support Systems/ASM
as an alternative for TPF development.
Systems/ASM runs on z/Linux, Linux/390 as well as intel Linux, Windows
and other platforms.
Se
Visa is a TPF shop. zTPF is built on zLinux and needed HLASM.
Betsie
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Paul Giordano
Sent: Friday, June 09, 2006 11:45 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: HLASM on zLinux install
My interest is piqued
My interest is piqued - what will you be using HLASM for on zLinux? (If
it's not confidential information...)
Paul Giordano
Technical Sales Specialist - Linux zSeries
e-business Solutions Technical Sales, Americas
(312) 529-1347
(630) 207-9435 (cell)
email: [EMAIL PROTECTED]
Check http://www.ibm
Thank you, Mark. I did MOVEFILE on VM until I found the correct file
on the tape; moved the drive to zLinux and ran dd. Used the Device
Driver manual for sample commands.
Appreciate your suggestion. BTW, it's mt_st rather than mt-st.
Betsie
-Original Message-
From: Linux on 390 Port [
On 6/9/06, Massimiliano Belardi <[EMAIL PROTECTED]> wrote:
I'm observing that my Linux under z/VM is able to catch only one CPU even if my
z/VM is configured with 2 processors. This should be true if z/VM by default
virtualize the two cpu in one...
But...
I'm going to modify some variable for D
I'm observing that my Linux under z/VM is able to catch only one CPU even if my
z/VM is configured with 2 processors. This should be true if z/VM by default
virtualize the two cpu in one...
But...
I'm going to modify some variable for DB2...
INTRA_PARALLEL=yes should parallelize the CPU usage by
12 matches
Mail list logo