Thanks for your help, it worked. I can now get a VNC and putty session.
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark Post
Sent:
We cannot get an FTP session open on this RHEL 5.1 system. Any ideas
what we are doing wrong??
Lea Stahr
Senior Systems Engineer
Linux and zLinux
Navistar, Inc.
630-753-5445
[EMAIL PROTECTED]
From: Doornbos, Joshua (Josh)
Sent: T
Stahr, Lea wrote:
We cannot get an FTP session open on this RHEL 5.1 system. Any ideas
what we are doing wrong??
[EMAIL PROTECTED] ~]# ftp brksvl10
Connected to brksvl10.
220 (vsFTPd 2.0.5)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an
> >
> > KERBEROS_V4 rejected as an authentication type
>
> It looks like you haven't (correctly?) set up kerberos as an
> authentication mechanism (pam?).
And if you have, please SERIOUSLY consider switching to Kerberos 5. K4
has some significant security exposures.
That's controlled via pam, just remove the kerberos pam config to remove
that.
however that's not the problem.
best guess is you have SElinux enabled and it is blocking you
if you do not intend to use SELinux you can set it to permissive mode or
disable completely
if you do want SELinux used, you
Hi,
We've noticed that the kjournal process takes up almost 30% of our
processing at times.
When I ran mke2fs -jI let it default. Would this be a block size of
4096?
Should I have used -E stride=stripe-size? If so, are there
recommendations for large files?
We have raid 5 and raid 1.
Bet
Spann, Elizebeth (Betsie) wrote:
Hi,
We've noticed that the kjournal process takes up almost 30% of our
processing at times.
When I ran mke2fs -jI let it default. Would this be a block size of
4096?
Yes, default block size is 4096.
Should I have used -E stride=stripe-size? If so, ar
Thanks for the script. I guess I will need a little more help. Will I
need to download the php source or is it stored somewhere on my system?
Do I need to run the build script from the same directory as the package
source? Will I need to reinstall or upgrade the package after it is
built?
Thanks,
Spann, Elizebeth (Betsie) wrote:
Hi,
We've noticed that the kjournal process takes up almost 30% of our
processing at times.
When I ran mke2fs -jI let it default. Would this be a block size of
4096?
Yes, default block size is 4096.
Should I have used -E stride=stripe-size? If so, ar
>>> On 10/7/2008 at 3:32 PM, in message
<[EMAIL PROTECTED]>,
"Jones, Russell" <[EMAIL PROTECTED]> wrote:
> Thanks for the script. I guess I will need a little more help. Will I
> need to download the php source or is it stored somewhere on my system?
If you downloaded the /source part of the tre
Should I have used something other than the defaults when I ran mke2fs
-j? Is there a segment size default that should be overridden for
large files?
Betsie
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Justin Payne
Sent: Tuesday, October 07, 2008 1:2
I have a Linux server (sles 10 sp 2) that is currently using VSWITCH
with no problems.
I need to change him to use a DEDICATEd OSA.
I keep getting
qeth: Could not register IP address 10.93.27.248 (rc=0xe080/57472)
When I change the device from a NIC to 3 dedicated OSAs (same osa
cards).
I've t
>>> On 10/7/2008 at 6:21 PM, in message
<[EMAIL PROTECTED]>, Marcy
Cortes <[EMAIL PROTECTED]> wrote:
> I have a Linux server (sles 10 sp 2) that is currently using VSWITCH
> with no problems.
> I need to change him to use a DEDICATEd OSA.
>
> I keep getting
> qeth: Could not register IP addres
Nope, picking some address I know has never been used:
# ifconfig eth0 10.93.27.200
ifconfig eth0 10.93.27.200
qeth: Could not register IP address 10.93.27.200 (rc=0xe080/57472)
Oct 7 15:36:42 tefvm-proxy kernel: qeth: Could not register IP address
10.93.27
.200 (rc=0xe080/57472
An old post from the world traveling Alan Altmark said this about code 0xe080:
Now *this* I can help with. See that RETCODE? I recognize it as an OSA
"reject code". Those are documented in an appendix of the OSA/SF book. It
means that:
- a cable is not plugged into the port (both ends)
- the po
But that's got to be a big lie :) --- it is working if it is on a
vswitch. Just not with dedicates.
The cables are happy. The ports are happy. The physical switch is
happy.
What else would cause a reject?
Marcy
"This message may contain confidential and/or privileged information. If
you
Check your DASD Cache statistics (ESADSD5 on ESAMAP). This kjournal problem
happens when
the Non-volatile storage in cache controller fills up - dasd performance gets
terrible and
kjournal uses more CPU.
Spann, Elizebeth (Betsie) wrote:
Hi,
We've noticed that the kjournal process takes up
>>> On 10/7/2008 at 6:46 PM, in message
<[EMAIL PROTECTED]>, Marcy
Cortes <[EMAIL PROTECTED]> wrote:
> But that's got to be a big lie :) --- it is working if it is on a
> vswitch. Just not with dedicates.
> The cables are happy. The ports are happy. The physical switch is
> happy.
Are you sur
Yep, same chpid.
This is on a z10, z/VM 5.4, sles 10 sp2.
Maybe I should go try in on a z9, z/VM 5.3 and sles9 sp4 just for grins
since it sounds like it ought to work!
Marcy
"This message may contain confidential and/or privileged information. If
you are not the addressee or authorized to
Thank you. Unfortunately for us, the ESADS reports are for 3390s. We
are using FCP-attached SCSI.
Betsie
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Barton Robinson
Sent: Tuesday, October 07, 2008 4:45 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Kjo
This has been my complaint about SCSI - the symptoms are you have an I/O
problem, but the
metrics are not there to prove it or correct the problem. Given a choice, ECKD
performance is manageable, SCSI is not.
Spann, Elizebeth (Betsie) wrote:
Thank you. Unfortunately for us, the ESADS rep
Can anyone tell me if a Linux Guest can support SNA APPC (ie. LU6.2) over
channel-to-channel connections to another LPAR?
Thanks,
Al
__
Instant Messaging, free SMS, sharing photos and more... Try the new Yahoo!
Canada Messen
What disk HW is it?
Marcy
"This message may contain confidential and/or privileged information. If
you are not the addressee or authorized to receive this for the
addressee, you must not use, copy, disclose, or take any action based on
this message or any information herein. If you have received
23 matches
Mail list logo
