Hi,
I have a RHEL 6.2 system that I logged into OK yesterday and did some work
(including installing a number of RPMs). This morning I was unable to
login through SSH, though I'm sure I used the right password.
So I went to the console which still had root logged on and tried the
passwd
Michael,
I think you best shot for now is to start RHEL in init 1 or Single user mode,
and put SELinux in permissive mode.
If it works, probably RACF is not behaving well with SELinux.
If you need help with that, let me know,
Regards,
Filipe Miranda
Linux on System z
On 21/08/2012, at
Filipe,
I think you best shot for now is to start RHEL in init 1 or
Single user mode, and put SELinux in permissive mode.
If it works, probably RACF is not behaving well with SELinux.
Thanks for the quick reply (and welcome to the land of z :))
I did not try run level 1. What I did try was
Remounting root filesystem in read-write mode
That disk might still be attached to the other guest and you did not detach
them, so when you ipled your guest the system's disk was mounted read only?
Sam Bass
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU]
Sam,
That disk might still be attached to the other guest and you did not
detach
them, so when you ipled your guest the system's disk was mounted read
only?
No, I had them R/W. Thanks for the append though...
Mike MacIsaac mikemac at-sign us.ibm.com
On Tuesday, 08/21/2012 at 09:39 EDT, Filipe Miranda fmira...@redhat.com
wrote:
I think you best shot for now is to start RHEL in init 1 or Single user
mode,
and put SELinux in permissive mode.
If it works, probably RACF is not behaving well with SELinux.
Linux and RACF have no interaction
Hi,
I'll follow up with more info on the can't login/SE Linux issue later.
I reinstalled RHEL 6.2, this time dasdfmt'ing the two disks from a root
shell before using the install shell. I turned off SE Linux by setting
SELINUX=permissive in /etc/selinux/config, and ran through the same steps
One thing I ran into on RHEL6:
Ext4 seems to be a bit more sensitive about being properly closed than ext3
did, and RHEL6 by default doesn't go to a shell prompt when install is done (at
least when using kickstart).
When I built a test system with ext4 and a default kickstart setup, the system
Does SLES 11 SP2 have a subversion RPM?
Mike MacIsaac mikemac at-sign us.ibm.com
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
Hi,
It does. If I remember correctly, subversion is located on the SDK DVD.
Regards.
On Aug 21, 2012 8:48 PM, Michael MacIsaac mike...@us.ibm.com wrote:
Does SLES 11 SP2 have a subversion RPM?
Mike MacIsaac mikemac at-sign us.ibm.com
On 8/21/2012 at 08:47 PM, Michael MacIsaac mike...@us.ibm.com wrote:
Does SLES 11 SP2 have a subversion RPM?
It's on the SDK.
Mark Post
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to
It's on the SDK.
Which one? I see three:
-rw-r- 1 root suse 2094888960 Feb 16 2012
SLE-11-SP2-SDK-DVD-s390
x-GM-DVD1.iso
-rw-r- 1 root suse 4726601728 Feb 16 2012
SLE-11-SP2-SDK-DVD-s390
x-GM-DVD2.iso
-rw-r- 1 root suse 2224711680 Feb 16 2012
Hi,
On x86_64, it was on the first DVD.
I downloaded the iso from this link and it seems that there is only 2 DVD
for each platform :
http://download.novell.com/Download?buildid=NgW3ToaagDQ~
Regards.
On Aug 21, 2012 9:06 PM, Michael MacIsaac mike...@us.ibm.com wrote:
It's on the SDK.
Which
Dominic,
it was on the first DVD.
Thanks - I'll stop after the first DVD download...
Mike MacIsaac mikemac at-sign us.ibm.com
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to
Based on my understanding, machine guests such as linux on z/VM can get cpu
resource by their SHARE value.
For example, LINUXA system has SHARE RELATIVE 100. LINUXB system also has
SHARE RELATIVE 100. So LINUXA and LINUXB both has 50% of real physical
processor resource.
If LINUXA has 2 virtual
On Tuesday, 08/21/2012 at 11:08 EDT, Lu GL Gao lu...@cn.ibm.com wrote:
Based on my understanding, machine guests such as linux on z/VM can get
cpu
resource by their SHARE value.
For example, LINUXA system has SHARE RELATIVE 100. LINUXB system also
has
SHARE RELATIVE 100. So LINUXA and LINUXB
16 matches
Mail list logo
