Yes - wasn't sure if you'd typo'd entering them or these were actually the
directory entries..if the latter - yep - you'll be missing 500 cyls on
your LVM disks.
Anyway - easy mistake .. I assume the correct sizes will make it all work
again :)
p.s. your 202 should remain 32259 .. it's
Scott, I think you've got it, I will try tomorrow. Look at the LVM DASD sizes,
I made the same mistake again! Hard to put 6 gallons in a 5 gallon bucket. I
will let you know.
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Scott
Rohling
Sent: T
The flashing is done as full volumes starting at cylinder 0.
David Kreuter
Original message
From: Scott Rohling
Date: 12-03-2013 14:51 (GMT-05:00)
To: LINUX-390@VM.MARIST.EDU
Subject: Re: sles11.2 mount logical volumes by path
Is the clone directory entry a typo? 322
If the new method of registration (Doodle) is causing you grief or your
corporate firewall prevents you from using it, just send email to
ne...@sinenomine.net if you¹d like to register for the event.
--
For LINUX-390 subscribe /
Is the clone directory entry a typo? 32259 instead of 32759 ? Your gold
image also uses 32259 for the 202 disk.. so a little confusing in the
numbers between the 2 directory entries -- I didn't notice this at first
glance..
>From what you list - your sizes don't match - but I would think the
D
Well - not sure why it won't mount - your directory entries look good...
what's the /etc/fstab look like?
(fyi - you don't need to format the target volumes -- you're just copying
right over the top of all that nice formatting -- you can save yourself
this step in the future)
Scott Rohling
On
REFERENCE DASD IN STRING BELOW
New Clone
Three "blank" DASD
Cpfmtxa BA4d
Format
000 end
Label l12501
Cpfmtxa BB50
Format
000 end
Label l12502
Cpfmtxa BC4A
Format
000 end
Label l12503
FLASHCOPY C74D 000 END BA4D 000 END SAVELABEL
FLASHCOPY C650 000 END BB50 000 END SAVELABEL
FLASHCOP
Dave,
Can you also post the contents of your /etc/fstab file, and perhaps the
output of pvdisplay, vgdisplay and lvdisplay?
"Mike MacIsaac"
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists
Since it looks like you're DDRing a whole DASD rather then a minidisk --
are you relabelling, etc?I'm confused from your example what you're
cloning and how.. Can you show us the directory entry?
Scott Rohling
On Tue, Dec 3, 2013 at 7:20 AM, Dean, David (I/S) wrote:
> Ouch, you are ri
As Mike pointed out this entry is rife with misinformation. However I am still
confused as to why I can no longer simply DDR or Flashcopy the golden DASD's.
hopefully I am not further embarrassing myself
From: Dean, David (I/S)
Sent: Tuesday, December 03, 2013 9:45 AM
To: 'Linux on 3
Ouch, you are right, I cut and pasted the wrong line. It should have been the
/dev/vg1/lv1, sorry about that. However the problem is that in the past we
just DDR'd or flashcopied only the three DASD we use and everything worked, has
this changed, or am I just missing something?
Example (I hop
David,
Logical volumes are usually referenced in /etc/fstab by their /dev entry.
For example:
/dev/opt_vg/opt_lv /opt ext3 acl,user_xattr 1
2
That is probably why by-path is not an option.
Then you write:
> caught this when I DDR'd our "golden image" and attempted
>
I just discovered a problem that I did not know I had. When building a new
server today on 11.2 I discovered it will not allow me to choose "by path" for
my logical volumes. We upgraded over 50 servers which all used "by path" with
no issues and they seemed to operating fine but when I went b
13 matches
Mail list logo
