estore...440RES, 440W01 or 440W02.
I already have a LINUX SuSE 8 running under z/VM and I want to clone that image but I
lost the USER DIRECT fileany help is very welcome...
Thanks.
Hugo Rivera
--
For LINUX-390 subscribe / si
It works!!thank you so much Franz...I appreciate it.
Best regards.
Hugo Rivera
Franz Josef
Pohlen To: [EMAIL PROTECTED]
<[EMAIL PROTECTED]>cc:
Sent by: Li
ch device
What am I doing wrong or missing???
Thank in advance.
Hugo Rivera
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http:/
ke an ext3 file???...I only see examples for ext2.
There is not a kind of mke2fs command for ext3.
Thanks.
Hugo Rivera
Daniel Jarboe
<[EMAIL PROTECTED]To: [EMAIL PROTECTED]
stserv.com>
work, and even when I ftp open the
Linux ip address
from inside the Linux server I got "Connection refused". Its ip addr. is able to ping
from anywhere on my local network, and
it's using port 21 for FTP. Any suggestions???
Thank you.
Hugo Rivera
--
*:*
No, I'm not running ipchains.
I'm not logging as root or other user defined in /etc/ftpusers.
It looks like it's listening, NIC card and TCPIP working, but FTP server does not.
Hugo Rivera
Ranga Nathan
<[EMAIL PR
resolve this? Where can we find ld-linux.so.2. It is not on the
Operating System CD's.
Hugo Rivera
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINU
Following Redbooks Technote TIPS0128 instructions, I've create a logical volume and
installed a Reiser file system on it, and it works well. I used
the command:
mkreiserfs /dev/lvmdata/vol1
Now, I'm trying to enlarge the logical volume vol1 using:
lvextend /dev/lvmdata/vol1 -L 7.64G
and I check
Yes, I got it.
I just find out that the reiserfsck and resize_reiserfs commands exist.
I couldn't find any manual that say something about that.
Thank you.
Hugo
--
For LINUX-390 subscribe / signoff / archive access instructions
This is a test...
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 Douglas Drive,
Martinez, CA 94553-4068
Tel:(925) 313-1309
Nextel: (925) 383-5781
Fax: (925) 313-1459
Pager: (925) 975-7479
email: [EMAIL PROTECTED
Hello -
Do you use RTC=YES parameter in your FDR jobs (running in your z/OS LPAR) to
take full volume backups of your z/VM DASD???
Is the restore process the same like a another z/OS full volume restore?
Thank you.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
pported on hsi1
qeth: Trying to use card with devnos 0x1004/0x1005/0x1006
qeth: Device 0x1004/0x1005/0x1006 is an OSD Express card (level: 0358)
with link type Fast Eth (portname: ETHPORT1)
eth0: no IPv6 routers present
hsi1: no IPv6 routers present
I would appreciate any help.
Thank you.
Hug
b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Hugo Rivera
7 Linux SuSE 8 guests running under z/VM 4.4 on a z/800
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 Douglas Drive,
Martinez, CA 94553-4068
Tel:(925) 313-1309
Nextel: (925) 383-5781
Fax: (925) 313-1459
Pager: (925) 975-7479
email
ted read-only. To remount it
read-write do:
bash# mount -n -o remount,rw /
Attention: Only CONTROL-D will reboot the system in this
maintanance mode. shutdown or reboot will not work.
Give root password to login:
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 D
sing "sed" I could include the new devices (changing dasd=201-212 to
dasd=201-215) in /etc/zipl.conf, but still have the same errors at boot time.
Is there some way to tell Linux "DO NOT ACTIVATE LVM"???
Thank you
Hugo Rivera
SSA II
County of Contra Costa
Department of In
? What does the kernel show for
the command line when you reboot? If it doesn't include the new device
numbers, you didn't re-run the zipl command.
Mark Post
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Hugo
Rivera
Sent: Wednesday, March 09
:
umount /uxxx
Extend your logical volume:
lvextend -L+1G /dev/vgroupx/volx (if you want to extend 1 giga).
Mount your file system:
mount /dev/vgroup/volx /uxx
I hope this can help you.
Hugo Rivera
SSA II
County of Contra Costa
Department of Informa
I'm sorry, I forgot the main step, before you mount your file system you MUST
resize your logical volume:
resize2fs /dev/vgroup/volx
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 Douglas Drive,
Martinez, CA 94553-4068
Tel:(925) 313-1309
N
Good afternoon (PT) everybody -
I'm planning to use Hypersocket to communicate a z/VM Linux LPAR with a MVS (OS/390
2.10) LPAR.
Is that possible?...or the MVS LPAR has to be at z/OS level.
Thanks in advance.
--
For LINUX-390 sub
e to do to fix this
issue?...Thank you.
Hugo Rivera
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
program running on z/OS, and after its process
is done send back data to z/OS program.
Could somebody give some examples to do that or a path to follow up???
We are running Linux SuSE8 on z/VM.
Thank you.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
Tel
It sounds good, but our application on the mainframe runs under IDMS and batch.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 Douglas Drive,
Martinez, CA 94553-4068
Tel:(925) 313-1309
Nextel: (925) 383-5781
Fax: (925) 313-1459
Pager: (925
Apache SOAP and available
in z/OS under CICS (don't know about batch).
Hugo Rivera wrote:
> Hello List -
> We are trying to get some kind of TCP/IP program to program communication
to pass data between our Linux and z/OS partitions.
> The program running on Linux should be ready t
Thank you folks!!...I appreciate your help.
I'm going to start working on this...and I'll let you know how it's
goingThank you again.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
Dave Jones <[EMAIL PROTECTED]>
Hello list,
I'm trying to monitoring the traffic on my network and record packets that meet
certain criteria using the command:
tcpdump host 192.168.1.22
Then I received the messages:
tcpdump: listening on eth0
Though data is going through etho interface nothing else is shown. I'm missing
s
:01 PM
Subject
Re: tcpdump
Please respond to
Linux on 390 Port
Hugo Rivera wrote:
> Hello list,
>
>
)
popped up on zLinux server we have to use VNCSERVER on the client side.
Is there some way to avoid any java interface (as vncserver, hummingbird, etc)
on the client site(Windows) and get clients connected (SSH) to the
application screens running on zLinux???
Thanks in advance.
Hugo Rivera
Thanks Peter.
We are using PuTTY. What we want is avoid any vncserver installation on the
client site to get the application screens showed up.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
30 Douglas Drive,
Martinez, CA 94553-4068
Tel:(925) 313-1309
Thank you John and David. Now I'm getting it a lot much clear.
Hugo Rivera
"McKown, John" <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port
Thanks everyoneI appreciate your help.
Hugo Rivera
David Boyes <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port
ndows takes 3 -4 sec. But when running Java it takes 1.5
mints!!..
I heard Java application are "per se" heavy and slowly on Linux for zSeries
(z/VM)Are there some tuning tips to consider to improve Java app's
response time???...or I just have to forget about it.
x27;m
getting the following error:
error Unable to read the directory './s390x/update/SUSE-CORE/9/patches'
I don't know how/when this directory has to be createdI would
appreciate any help.
Thanks.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technol
e console as root or any other user.
I'll appreciate any help.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
ATTENTION: This message is intended only for the individual to whom it is
addressed and may contain information that is confidential or privileged.
If
Yes, I'm using PuTTY. Do you mean I have to download the latest version?
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
ATTENTION: This message is intended only for the individual to whom it is
addressed and may contain information that is confidenti
Changing PermitRootLogin,PasswordAuthentication to yes and restarting sshd
did the trick.
Thank you everybody.
Hugo Rivera
SSA II
County of Contra Costa
Department of Information Technology
ATTENTION: This message is intended only for the individual to whom it is
addressed and may contain
36 matches
Mail list logo