>>> On Fri, Mar 30, 2007 at 11:09 AM, in message
<[EMAIL PROTECTED]>,
"Jones, Russell" <[EMAIL PROTECTED]> wrote:
> This time it died trying to start mysql. I wonder if I didn't get that
> package installed? I guess that I need to keep it from trying to start
> at IPL time for now. Can I do that f
EMAIL PROTECTED] On Behalf Of
Mark Post
Sent: Thursday, March 29, 2007 5:25 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Problems starting Slackware after new install
>>> On Thu, Mar 29, 2007 at 5:11 PM, in message
<[EMAIL PROTECTED]>
,
"Jones, Russell" <[EMAIL PROTECTED]&g
>>> On Thu, Mar 29, 2007 at 5:11 PM, in message
<[EMAIL PROTECTED]>,
"Jones, Russell" <[EMAIL PROTECTED]> wrote:
> I got farther this time. I completed the installation and IPLed from my
> DASD volume. It started to come up, but froze and went into a disabled
> wait after trying to start gmp.
S
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark Post
Sent: Thursday, March 29, 2007 11:41 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Problems starting Slackware after new install
>>> On Thu, Mar 29, 2007 at 9:32 AM, in message
<[EMAIL PROTECTED]>
,
"Jones, R
>>> On Thu, Mar 29, 2007 at 9:32 AM, in message
<[EMAIL PROTECTED]>,
"Jones, Russell" <[EMAIL PROTECTED]> wrote:
> That sounds like what my problem is. I did not install the "K" set. Are
> there any other sets that must be installed?
Usually, A, part of AP, and N are all that is required. (I m
HMC?
***
I ended up giving up on the CD and IPLing from tape.
Thanks,
Russ Jones
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark Post
Sent: Wednesday, March 28, 2007 4:34 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Problems starting Slackware after n
>>> On Wed, Mar 28, 2007 at 5:24 PM, in message
<[EMAIL PROTECTED]>,
"Jones, Russell" <[EMAIL PROTECTED]> wrote:
> I have completed the install of Slackware 10.0 in an LPAR on our
> mainframe. The install seemed to complete without any problems, but my
> new Slack/390 will not IPL. The LPAR goes
I have completed the install of Slackware 10.0 in an LPAR on our
mainframe. The install seemed to complete without any problems, but my
new Slack/390 will not IPL. The LPAR goes into disabled wait status. Any
ideas why my boot information is not being found?
Thanks,
Russ
