From: Mark Perry [EMAIL PROTECTED]
Subject: Re: Qeth Problems
In-Reply-To: [EMAIL PROTECTED]
Hi Michael,
maybe someone else knows better, but the RedHat OCOs don't go as far as
2.4.17 only 2.4.9-38, the SuSE OCOs go as high as 2.4.19?
Even though you have upgraded your Kernel
Hello, everyone.
I've been trying to send this message for a couple of weeks now, with no
success. Here we go again...
I've been attempting to setup a eth0 device uisng a direct link to an
OSA card. I've got 3 non-shared devices defined and dedicated, but the
device will not come up. Whenever I
University Fax: 660-543-8123
- Original Message -
From: Michael Lambert [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, October 29, 2002 9:54 AM
Subject: Qeth Problems
Hello, everyone.
I've been trying to send this message for a couple of weeks now, with no
success. Here we go
Do you have an alias for eth0 in /etc/modules.conf?
alias eth0 qeth
alias eth1 qeth
On Tuesday 29 October 2002 09:54 am, you wrote:
Hello, everyone.
I've been trying to send this message for a couple of weeks now, with no
success. Here we go again...
I've been attempting to setup a eth0
Yep...here are the relevant contents of my modules.conf.
alias eth0 qeth
add probeall qeth qdio
From: Rich Smrcina [EMAIL PROTECTED]
Organization: Sytek Services
Subject: Re: Qeth Problems
Do you have an alias for eth0 in /etc/modules.conf?
alias eth0 qeth
alias eth1 qeth
.
Ciao
Mark
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390;VM.MARIST.EDU]On Behalf Of
Michael Lambert
Sent: 29 October 2002 16:55
To: [EMAIL PROTECTED]
Subject: Qeth Problems
Hello, everyone.
I've been trying to send this message for a couple of weeks now, with no
success
if it works.
Mark Post
-Original Message-
From: Michael Lambert [mailto:mlambe7;lsu.edu]
Sent: Tuesday, October 29, 2002 10:55 AM
To: [EMAIL PROTECTED]
Subject: Qeth Problems
Hello, everyone.
I've been trying to send this message for a couple of weeks now, with no
success. Here we go again
It is not a restriction mark, only that the first address must be even.
(Speaking from experience.)
Ciao
Mark
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390;VM.MARIST.EDU]On Behalf Of
Post, Mark K
Sent: 29 October 2002 21:48
To: [EMAIL PROTECTED]
Subject: Re: Qeth Problems
system, but it is now running on the 2.4.17 kernel with the
IBM patches.
Michael Lambert
From: Mark Perry [EMAIL PROTECTED]
Subject: Re: Qeth Problems
In-Reply-To: [EMAIL PROTECTED]
Hi Michael,
you say defined and dedicated, thus I assume this is a zVM Guest?
If so then ensure
- I'm running on a z900 and dmesg shows
microcode of 323 when the QETH starts up.
Ciao
Mark
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390;VM.MARIST.EDU]On Behalf Of
Michael Lambert
Sent: 29 October 2002 22:16
To: [EMAIL PROTECTED]
Subject: Re: Qeth Problems
Mark,
Yes
PROTECTED]
Subject: Re: Qeth Problems
In-Reply-To: [EMAIL PROTECTED]
Hi Michael,
maybe someone else knows better, but the RedHat OCOs don't go as far as
2.4.17 only 2.4.9-38, the SuSE OCOs go as high as 2.4.19?
Even though you have upgraded your Kernel from 2.4.9 to 2.4.17 will the
OCOs
still
/0xF819 is an OSD Express card (level: 0324)
with link type Fast Eth (portname: f221801)
Ciao
Mark
-Original Message-
From: Linux on 390 Port [mailto:LINUX-390;VM.MARIST.EDU]On Behalf Of
Michael Lambert
Sent: 29 October 2002 22:44
To: [EMAIL PROTECTED]
Subject: Re: Qeth Problems
Mark,
I'm
Hi Michael,
Here is a sample of my dmseg from SuSE SLES7 S390x running under zVM 4.3 on
a z900 - Mark Post may wish to examine the device addresses ;-)
qeth: Trying to use card with devnos 0x830A/0x830B/0x8309
qdio : Adapter interruption facility not installed.
qdio : Not all CHSCs supported.
Hello again,
I've been trying to give a linux image access to an OSA via the qeth module
with no luck. I have been following the instructions in the Large Scale
Linux Deployment Redpiece because it deals with Red Hat 7.2 systems, which
is what we run here. While searching through previous posts
: qeth problems
Hello again,
I've been trying to give a linux image access to an OSA via the qeth module
with no luck. I have been following the instructions in the Large Scale
Linux Deployment Redpiece because it deals with Red Hat 7.2 systems, which
is what we run here. While searching through
:
|
| Subject: qeth problems
16 matches
Mail list logo