@VM.MARIST.EDU
Subject: Re: ZLINUX TCPIP problem
Srivinas,
After IPL of ZVM I get :
VSWITCH SYSTEM VSW1 STATUS IS READY.
DTCVSW1 is vswitch controller for 0503.P00
DTCVSW2 is vswitch controller for backup device 0506.P00
OK so you do have a VSWITCH defined, and it appears to be using real OSA
devices 503
Srivinas,
After IPL of ZVM I get :
VSWITCH SYSTEM VSW1 STATUS IS READY.
DTCVSW1 is vswitch controller for 0503.P00
DTCVSW2 is vswitch controller for backup device 0506.P00
OK so you do have a VSWITCH defined, and it appears to be using real OSA
devices 503, 504 and 505 (with 506, 507 and 508 as
¨
Regards,
Srinivas G
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Michael
MacIsaac
Sent: Thursday, December 09, 2010 7:20 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: ZLINUX TCPIP problem
From a 3270 console, after RHEL boots, what is the output of
>From a 3270 console, after RHEL boots, what is the output of these
commands:
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# service network restart
"Mike MacIsaac"(845) 433-7061
--
For LINUX-390 subscribe / signoff / arc
Port [mailto:linux-...@vm.marist.edu] On Behalf Of Michael
MacIsaac
Sent: Thursday, December 09, 2010 7:10 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: ZLINUX TCPIP problem
Srinivas,
> Just have to move the LPARS and images.
Did you move this Linux from an LPAR to running under z/VM? If so, t
Srinivas,
> Just have to move the LPARS and images.
Did you move this Linux from an LPAR to running under z/VM? If so, then
you'd probably need to assign the same OSA triplet to the virtual machine
(perhaps through three DEDICATE statements in the user directory entry for
the Linux virtual machine
I get this command in ZVM
cp q v osa
HCPQVD040E Device OSA does not exist
-Original Message-
From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Bruce
Furber
Sent: Thursday, December 09, 2010 6:43 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: ZLINUX TCPIP problem
Step
Step #1 While logged on the virtual machine enter the following you should see
a set of 3 OSA addresses. They need to be Virtual coupled with the Vswitch or
Dedicated to real addresses.
#CP Q V OSA
OSA 1000 ON NIC 1000 UNIT 000 SUBCHANNEL = 0006
1000 DEVTYPE OSA CHPID 02 O
TCPIP problem
> But we are unable to get the TCPIP running.
What are the error messages related to TCP/IP as Linux boots? Is the
virtual machine being attached to a VSWITCH? If so, are you sure there is
no error message regarding the VSWITCH when you log on to the virtual
machine?
"Mike
> But we are unable to get the TCPIP running.
What are the error messages related to TCP/IP as Linux boots? Is the
virtual machine being attached to a VSWITCH? If so, are you sure there is
no error message regarding the VSWITCH when you log on to the virtual
machine?
"Mike MacIsaac"(845) 433-
Sorry. Sent mail with a wrong subject. My apologies.
We have RHL on ZVM. We have moved the ZVM and two linux images on the
Mainframe. But we are unable to get the TCPIP running.
The Network is fine since two ZOS LPARs are functioning on the Same OSA card.
The ZVM TCPIP is fine. I used IPWIZARD
11 matches
Mail list logo
