On Monday 18 June 2007 08:51, Hartmut Hackmann wrote:
> Hi, Werner
>
> Werner Braun schrieb:
[snip]
> Summing up the test results, i have the impression that this card is
> different from what we have yet.
> I am almost sure that the problem lies in the GPIO configuration. Please
> try the followi
On Tuesday 19 June 2007 10:01, Werner Braun wrote:
[snip]
> In DVB-T, I haven't been
> able to tune in into all stations (e.g. RTL, ZDF), but this might be an
> antenna issue.
It could also be a configuration problem. If, for example, the station
changes its guard interval the [EMAIL PROTECTED
G'day Daniel,
On Mon, Jun 18, 2007 at 09:30:29PM +0200, Daniel Weigl wrote:
> If i set the USB_PID_MSI_DIGI_VOX_MINI_II to 0x0506 i get following dmesg:
> [ 340.530811] usb 6-3: new high speed USB device using ehci_hcd and
> address 8
> [ 340.645215] PM: Adding info for usb:6-3
> [ 340.645315
>since I officially take care about the latest Empia em28xx code I want
>to get that project removed from linuxtv.org.
>Mauro already broke some parts in the incomplete inkernel linux driver.
>Since the few developers here who cannot just shut their mouth and
>accept others work I don't see another
Previous was corrupted.
>since I officially take care about the latest Empia em28xx code I want
>to get that project removed from linuxtv.org.
>Mauro already broke some parts in the incomplete inkernel linux driver.
>Since the few developers here who cannot just shut their mouth and
>accept others
Previous 2 mails were corrupted.
>since I officially take care about the latest Empia em28xx code I want
>to get that project removed from linuxtv.org.
>Mauro already broke some parts in the incomplete inkernel linux driver.
>Since the few developers here who cannot just shut their mouth and
>acce
Sorry, I will removed the quoted message, the message keeps arriving corrupted.
>From a user's point of view, the 2 projects (em28xx and linuxtv.org)
have a huge overlapping and common code.
If I wanted to use them both, would I run into a nightmare, or is it
going to be easy?
Will em28xx still be
Hi
Zenon Mousmoulas schrieb:
> Hartmut Hackmann @ Tuesday, June 19, 2007 12:09 AM:
>> I will attach a modified version of the patch posted by
>> Thomas Unverzagt. It should
>> apply to the current repository.
>> Please test it and report.
>
> Hi,
>
> I just applied the patch to tda10086.c from t
Hi guys!
I'm trying to make my dvb usb key work on linux (debian Sid), so I've
successfully compiled and loaded em28xx kernel module.
The problem is that after I've compiled and loaded em28xx, I can no more
use my uvc camera, even if I try to unload (modprobe - r) em28xx or load
(modprobe) or e
Hi, Werner
Werner Braun schrieb:
> Hartmut,
>
>> Summing up the test results, i have the impression that this card is
> different
>>from what we have yet.
>> I am almost sure that the problem lies in the GPIO configuration. Please try
>> the
>> following:
>> Please keep forcing the card type to
Noticed that someone at TerraTec apparently had coded a binary blob at
some point in time (the included files are dated April/06). See
http://forums.suselinuxsupport.de/index.php?s=&showtopic=51323&view=findpost&p=235296
Doubt very much that it would apply against a more recent kernelbut
adve
Hi all, haven't been following the list for the past 2 weeks, been a bit
busy, however I have a problem...
*If you don't feel like reading my monologue, skip to the bullet points*
I bought a KWorld Digital DVB-S 100 PCI card as a replacement for my POS
DVB-T card. I checked to see if it's suppor
> I'm using MythTV (surprise), and the card gets a 'partial' lock (L_S is
> what's reported by myth), but the signal strength info seems a bit off the
> wall (97% strength, 4.8dB signal/noise). Scanning for the channels went
I duno about everything else, but C/N ratio of 4.8dB is horrible.
Though
Am Mittwoch, den 20.06.2007, 08:29 +0900 schrieb timecop:
> > I'm using MythTV (surprise), and the card gets a 'partial' lock (L_S is
> > what's reported by myth), but the signal strength info seems a bit off the
> > wall (97% strength, 4.8dB signal/noise). Scanning for the channels went
>
> I dun
14 matches
Mail list logo
