Hi,
On Fri, Feb 29, 2008 at 11:19:50AM +, David Lee wrote:
Someone has reported (on the main linux-ha list) a problem building on
Solaris. One of the aspects was tools/ccdv. So I started looking...
In tools/Makefile.am the program ccdv seems to get special treatment
(which always
On 2008-02-29T11:19:50, David Lee [EMAIL PROTECTED] wrote:
So while I'm visiting this, is there any reason not to simplify this right
down to the usual 'automake' behaviour?
That obscure comment said ...auto-built but not auto-cleaned. Does
anyone know why is it necessary to avoid this
On Fri, 29 Feb 2008, Lars Marowsky-Bree wrote:
On 2008-02-29T11:19:50, David Lee [EMAIL PROTECTED] wrote:
So while I'm visiting this, is there any reason not to simplify this right
down to the usual 'automake' behaviour?
That obscure comment said ...auto-built but not auto-cleaned.
On 2008-02-29T15:39:07, David Lee [EMAIL PROTECTED] wrote:
But if you can pretty it up and --enable-pretty still works, sure.
No, I don't particularly want to get sidetracked into its insides. I was
simply wondering why, from the configure/make perspective, it seems to be
a special case.
I
On Fri, 29 Feb 2008, Lars Marowsky-Bree wrote:
On 2008-02-29T15:39:07, David Lee [EMAIL PROTECTED] wrote:
But if you can pretty it up and --enable-pretty still works, sure.
No, I don't particularly want to get sidetracked into its insides. I was
simply wondering why, from the
Hi,
[...]
But back to the original question:
Is there a way to tell Linux-HA to retry a failed
resource after a
certain amount of time again? [...]
The mentioned cluster had also a feature called auto-clear which
would clear the faulted-state after some time.
I personally
Hi,
I've seen these messages appearing when I connect the hb_gui to the mgmtd:
mgmtd[6819]: 2008/02/29_08:03:51 ERROR: crm_abort: ha_set_tm_time:
Triggered
assert at iso8601.c:887 : rhs-tm_mday 0 || lhs-days == rhs-tm_mday
I also found the same error right now!
Not only from mgmtd, crmd
it works now much better, both systems did a reboot (dont know why),
and now both VM running on the first server, so how can i get the
second server to take back the 2nd VM?
On Thu, Feb 28, 2008 at 1:19 PM, Dejan Muhamedagic [EMAIL PROTECTED] wrote:
Hi,
On Thu, Feb 28, 2008 at 12:11:31PM
Looks like it might be exactly the sort of thing I need. Thanks Andreas.
On 28/02/2008, Andreas Kurz [EMAIL PROTECTED] wrote:
On Thu, Feb 28, 2008 at 11:58 AM, Guy [EMAIL PROTECTED] wrote:
Hi,
I've seen a few howtos that suggest putting /var/lib/nfs on the drbd
volume so that each
Dominik Klein wrote:
Schmidt, Florian wrote:
Hello list,
I still have problem with my heartbeat-config
I want heartbeat to start AFD. I checked the RA for LSB-compatibility
and think that it's right now.
The log file says, that the bash does not find the command afd.
crmd[2725]:
At first I'm sorry for no subject...forgot -.-
The location of the script is /etc/init.d/afdha
I tried it also in /etc/ha.d/resource.d/afdha (the author told me to do so, but
there was an error in the ha-log, that he does not find afdha in /etc/init.d so
I switched it to that place)
Cibadmin
I am getting it too, after midnight on 2/29 in leap year - looks like a
date bug to me :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:linux-ha-
[EMAIL PROTECTED] On Behalf Of Sebastian Reitenbach
Sent: Friday, February 29, 2008 12:31 AM
To: linux-ha@lists.linux-ha.org
On Fri, Feb 29, 2008 at 11:52 AM, Schmidt, Florian
[EMAIL PROTECTED] wrote:
Hello list,
I still have problem with my heartbeat-config
I want heartbeat to start AFD. I checked the RA for LSB-compatibility
and think that it's right now.
The log file says, that the bash does not find the
Mit freundlichen Grüßen
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
ha.org] Im Auftrag von Dominik Klein
Gesendet: Freitag, 29. Februar 2008 12:03
An: General Linux-HA mailing list
Betreff: Re: [Linux-HA] (no subject)
Schmidt, Florian wrote:
Schmidt, Florian wrote:
Hello list,
I still have problem with my heartbeat-config
I want heartbeat to start AFD. I checked the RA for LSB-compatibility
and think that it's right now.
The log file says, that the bash does not find the command afd.
crmd[2725]: 2008/02/29_11:32:00 info:
Hello list,
I still have problem with my heartbeat-config
I want heartbeat to start AFD. I checked the RA for LSB-compatibility
and think that it's right now.
The log file says, that the bash does not find the command afd.
crmd[2725]: 2008/02/29_11:32:00 info: do_lrm_rsc_op: Performing
Schmidt, Florian escribió:
Hello list,
I still have problem with my heartbeat-config
I want heartbeat to start AFD. I checked the RA for LSB-compatibility
and think that it's right now.
The log file says, that the bash does not find the command afd.
Hello!
Can you post your resource
Hi,
On Fri, Feb 29, 2008 at 12:34:28AM +0100, [EMAIL PROTECTED] wrote:
It will reboot the other node if you have a STONITH device configured.
Do you have one?
No, I don't.
Yes I know, I need a stonith device but I don't have a real one yet.
Anyway even without should the node which is
Hi,
On Thu, Feb 28, 2008 at 01:53:08PM -0500, Tao Yu wrote:
On Thu, Feb 28, 2008 at 5:25 AM, Dejan Muhamedagic [EMAIL PROTECTED]
wrote:
Hi,
On Wed, Feb 27, 2008 at 11:45:10AM -0500, Tao Yu wrote:
Running heartbeat 2.1.2 on Centos4.5
The cluster has just two nodes, boxqaha1 and
On 1/4/07, Andrew Beekhof [EMAIL PROTECTED] wrote:
On 1/2/07, Andrew Beekhof [EMAIL PROTECTED] wrote:
On 1/1/07, Christian Froemmel [EMAIL PROTECTED] wrote:
On Mon, 1 Jan 2007, Marian Neubert wrote:
Hello,
crm_verify[11179]: 2007/01/01_12:13:26 ERROR:
[snip]
su $afduser -c afd -a
Try
su - $afduser -c afd -a
---^
Hi,
well this is what the script was before I changed it.^^
I exacetly erased this - because with them, I was not even able to start afd
by hand.
Without them I was able.
su - is very important to change to another user
Damon Estep [EMAIL PROTECTED] wrote:
I am getting it too, after midnight on 2/29 in leap year - looks like a
date bug to me :)
that would explain that I haven't seen it before, and hopefully it will be
fixed automagically by tomorrow ;)
maybe I should create a bug report so that it gets
On CentOS 4.5 with heartbeat 2.1.3-3:
# date
Fr Feb 29 13:21:42 CET 2008
# crm_verify -L
crm_verify[23102]: 2008/02/29_13:19:25 ERROR: crm_abort:
ha_set_tm_time: Triggered assert at iso8601.c:879 :
rhs-tm_mday 0 || lhs-days == rhs-tm_mday
Damon Estep wrote:
I am getting it too, after
Hi,
On Fri, Feb 29, 2008 at 04:55:40PM +0900, Junko IKEDA wrote:
Hi,
I've seen these messages appearing when I connect the hb_gui to the mgmtd:
mgmtd[6819]: 2008/02/29_08:03:51 ERROR: crm_abort: ha_set_tm_time:
Triggered
assert at iso8601.c:887 : rhs-tm_mday 0 || lhs-days ==
Hi,
On Fri, Feb 29, 2008 at 01:34:38PM +0100, Sebastian Reitenbach wrote:
Damon Estep [EMAIL PROTECTED] wrote:
I am getting it too, after midnight on 2/29 in leap year - looks like a
date bug to me :)
that would explain that I haven't seen it before, and hopefully it will be
fixed
Hi,
On Fri, Feb 29, 2008 at 10:07:09AM +0100, Ilkan Akcakaya wrote:
Hi Dejan and all others,
I compiled and installed Heartbeat 2.1.3 successfully.
I configured the haresources-files to bring up an ipadress, than drbd (0.7)
and finally mount filesystem.
haresources:
debian2 192.168.1.1
Hello,
I wrote the following lines on top of the script code:
export PATH=$PATH:/home/afdha
export AFD_WORK_DIR=/usr/afd
AFD needs one environment-variable named AFD_WORK_DIR to know, where to
work
I also did chown afdha:501 /usr/afd and chown /home/afdha
How far does this work, because
Some cosmetic changes. Thanks to wschlich.
Regards
Dominik
calc_linux_ha_scores.sh
Description: Bourne shell script
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/linux-ha
See also:
Mit freundlichen Grüßen
Hello,
I wrote the following lines on top of the script code:
export PATH=$PATH:/home/afdha
export AFD_WORK_DIR=/usr/afd
AFD needs one environment-variable named AFD_WORK_DIR to know, where
to
work
I also did chown afdha:501 /usr/afd and chown
Am Freitag, 29. Februar 2008 16:00 schrieb Carlos Alexandre de Souza da Silva:
(...)
When heartbeat is started(on both nodes) my node called pgslave gets
promoted to DC and that cannot happen, my node pgmaster should always be
the active part of the service and also this node needs to always
Hi,
On Fri, Feb 29, 2008 at 12:34:28AM +0100, [EMAIL PROTECTED] wrote:
It will reboot the other node if you have a STONITH device configured.
Do you have one?
No, I don't.
Yes I know, I need a stonith device but I don't have a real one yet.
Anyway even without should the node which is
Hello All
I had a query about the service monitoring in HA v2, I was
wondering if i can configure it in such a way that if a service fails ,
heartbeat should try to restart it say n number of times before it fences the
system
Appreciate your replies
Milind
Hi,
On Fri, Feb 29, 2008 at 08:41:02PM +0530, Milind Talekar wrote:
Hello All
I had a query about the service monitoring in HA v2, I was
wondering if i can configure it in such a way that if a service fails ,
heartbeat should try to restart it say n number of times before
http://www.linux-ha.org/v2/faq/forced_failover?highlight=%28faq%29
Unfortunately as far as I know it's broken in 2.1.3.
On Fri, Feb 29, 2008 at 8:11 AM, Milind Talekar [EMAIL PROTECTED] wrote:
Hello All
I had a query about the service monitoring in HA v2, I was
wondering if i
I had a query about the service monitoring in HA v2, I was
wondering if i can configure it in such a way that if a service fails ,
heartbeat should try to restart it say n number of times before it fences the
system
It will (by default) only fence the system, if stop fails.
If
I have 2 nodes on my setup running na active/passive configuration with
postgresql, drbd and drbdlinks.
When heartbeat is started(on both nodes) my node called pgslave gets
promoted to DC and that cannot happen, my node pgmaster should always be
the active part of the service and also this
Serge,
Thanks a lot for your feedback my problem is solved now :)
-Mensagem original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Em nome de Serge Dubrouski
Enviada em: quinta-feira, 28 de fevereiro de 2008 16:15
Para: General Linux-HA mailing list
Assunto: Re: [Linux-HA] Problems
When heartbeat is started(on both nodes) my node called pgslave gets
promoted to DC and that cannot happen, my node pgmaster should always be
the active part of the service and also this node needs to always try to
get promoted to DC when he have the chance(pgslave gotta spend minimal
time being
Schmidt, Florian wrote:
Mit freundlichen Grüßen
Hello,
I wrote the following lines on top of the script code:
export PATH=$PATH:/home/afdha
export AFD_WORK_DIR=/usr/afd
AFD needs one environment-variable named AFD_WORK_DIR to know, where
to
work
I also did chown afdha:501 /usr/afd
Hello,
I attached my newest config.
This config has a clone resource, a master/slave resource and a normal
resource. I have two nodes (debian and semsor10) and I have serious
problems to understand why happens some situations.
I think this is a normal situation:
Node: semsor10
On Fri, Feb 29, 2008 at 10:03 AM, Dejan Muhamedagic [EMAIL PROTECTED] wrote:
Hi,
On Fri, Feb 29, 2008 at 08:36:59AM -0700, Serge Dubrouski wrote:
http://www.linux-ha.org/v2/faq/forced_failover?highlight=%28faq%29
Unfortunately as far as I know it's broken in 2.1.3.
Is there a
Hi,
On Fri, Feb 29, 2008 at 09:17:47PM +0530, Milind Talekar wrote:
On Friday 29 February 2008, Serge Dubrouski wrote:
http://www.linux-ha.org/v2/faq/forced_failover?highlight=%28faq%29
Unfortunately as far as I know it's broken in 2.1.3.
On Fri, Feb 29, 2008 at 8:11 AM, Milind Talekar
Him
On Fri, Feb 29, 2008 at 04:59:51PM +0100, Adrian Chapela wrote:
Hello,
I attached my newest config.
Which version do you run? Apparently, Andrew improved multistate
resources in 2.1.3.
Thanks,
Dejan
This config has a clone resource, a master/slave resource and a normal
resource. I
Dejan Muhamedagic [EMAIL PROTECTED] wrote:
Hi,
On Fri, Feb 29, 2008 at 01:34:38PM +0100, Sebastian Reitenbach wrote:
Damon Estep [EMAIL PROTECTED] wrote:
I am getting it too, after midnight on 2/29 in leap year - looks like
a
date bug to me :)
that would explain that I haven't
Hi,
On Fri, Feb 29, 2008 at 08:36:59AM -0700, Serge Dubrouski wrote:
http://www.linux-ha.org/v2/faq/forced_failover?highlight=%28faq%29
Unfortunately as far as I know it's broken in 2.1.3.
Is there a bugzilla for that?
Thanks,
Dejan
On Fri, Feb 29, 2008 at 8:11 AM, Milind Talekar [EMAIL
Dejan Muhamedagic escribió:
Him
On Fri, Feb 29, 2008 at 04:59:51PM +0100, Adrian Chapela wrote:
Hello,
I attached my newest config.
Which version do you run? Apparently, Andrew improved multistate
resources in 2.1.3.
Yes I know and I am running 2.1.3 to do tests and in another
I did some google about the ucast errors, but not much info came arround.
What can be the cause of this? I rebooted and/or restarted the
machines but always on both machines the log fills with the following
Feb 29 16:17:15 xen-B1 heartbeat: [2974]: ERROR: write failure on
ucast eth0.: No such
Because one of the nodes is a very powerfull server and the other nodes is on a
more modest configuration so I would want to use the best machine all the time
possible.
-Mensagem original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Michael Schwartzkopff
Enviada em:
Hi,
On Fri, Feb 29, 2008 at 04:20:29PM -0300, Carlos Alexandre de Souza da Silva
wrote:
Because one of the nodes is a very powerfull server and the
other nodes is on a more modest configuration so I would want
to use the best machine all the time possible.
The DC location and the resources'
Hi,
On Fri, Feb 29, 2008 at 10:14:55AM -0700, Serge Dubrouski wrote:
On Fri, Feb 29, 2008 at 10:03 AM, Dejan Muhamedagic [EMAIL PROTECTED] wrote:
Hi,
On Fri, Feb 29, 2008 at 08:36:59AM -0700, Serge Dubrouski wrote:
http://www.linux-ha.org/v2/faq/forced_failover?highlight=%28faq%29
Hi,
On Fri, Feb 29, 2008 at 06:20:58PM +0100, Adrian Chapela wrote:
Dejan Muhamedagic escribi?:
Him
On Fri, Feb 29, 2008 at 04:59:51PM +0100, Adrian Chapela wrote:
Hello,
I attached my newest config.
Which version do you run? Apparently, Andrew improved multistate
resources in
I'm renting some cheap boxes from a provider that won't offer anything
except a standard bundle. This includes a single network card + net
connection and nothing else.
How sensible is it to attempt a DRBD setup using two of these boxes?
What ways might it actually go split brain if I put
Dejan Muhamedagic escribió:
Hi,
On Fri, Feb 29, 2008 at 06:20:58PM +0100, Adrian Chapela wrote:
Dejan Muhamedagic escribi?:
Him
On Fri, Feb 29, 2008 at 04:59:51PM +0100, Adrian Chapela wrote:
Hello,
I attached my newest config.
Which version do you run?
53 matches
Mail list logo