在 2008-1-24,下午7:45, Chun Tian (binghe) 写道:
在 2008-1-24,下午6:36, Dejan Muhamedagic 写道:
2. external/ipmi cannot work, because ipmitool power reset
sometimes
successfully reset my server but didn't exit with 0, and I have to
modify
the script to let it exit 0 when calling with reset ...
Un
On Thursday 24 January 2008 12:18:11 Dejan Muhamedagic wrote:
> Hi,
>
> On Thu, Jan 24, 2008 at 10:00:45AM +, Peter Clapham wrote:
> > Hello,
> >
> >
> > Following local experience with ipmi stonith, we've found that certain
> > systems (i.e. Sun X4200)would occasionally fail to perform a reset
在 2008-1-24,下午6:36, Dejan Muhamedagic 写道:
2. external/ipmi cannot work, because ipmitool power reset sometimes
successfully reset my server but didn't exit with 0, and I have to
modify
the script to let it exit 0 when calling with reset ...
Under which circumstances was that happen
Hi,
On Thu, Jan 24, 2008 at 10:00:45AM +, Peter Clapham wrote:
> Hello,
>
>
> Following local experience with ipmi stonith, we've found that certain
> systems (i.e. Sun X4200)would occasionally fail to perform a reset.
> Using a power off and then a power on proved far more reliable. So if
>
Hi,
On Thu, Jan 24, 2008 at 03:21:51PM +0800, Chun Tian (binghe) wrote:
> Hi, Dejan
>
> It seems that I have same hardware with you, some HP Proliant DL145 with
> Qlogic BMC which (claims to) support IPMI 1.5
>
> I tried the IPMI power cycle function and my server didn't got any
> response, I th
Hello,
Following local experience with ipmi stonith, we've found that certain
systems (i.e. Sun X4200)would occasionally fail to perform a reset.
Using a power off and then a power on proved far more reliable. So if
scripts are likely to find their way into mixed environments then going
the route
Hi, Dejan
It seems that I have same hardware with you, some HP Proliant DL145
with Qlogic BMC which (claims to) support IPMI 1.5
I tried the IPMI power cycle function and my server didn't got any
response, I think there may be something wrong between the ACPI
interface and server BMC, whi
Hello Dejna,
with my tyan boards I always used power cycle and it never failed on me.
ipmitool -I lan -H 10.0.0.52 -E chassis power cycle
Thomas
___
Linux-HA mailing list
Linux-HA@lists.linux-ha.org
http://lists.linux-ha.org/mailman/listinfo/lin
Hello,
Again on the IPMI.
As it says in the subject, there are two ways to reset a host
using an IPMI device. The external ipmi stonith plugin uses hard
reset and the ipmilan stonith device which is just back goes with
the power cycle.
Testing ipmilan with the Qlogic BMC device, which claims to