Ola Claudinei,
On 28-Oct-99 Claudinei Camargo wrote:
> first of all you i think you need to setup the parport module.
> insmod parport
> insmod parport_pc io=0x378 irq=7 => it's work fine here !
That did it!!! Now it works!!! Thank you so much!!!
73,
Martin
Hi again,
I am really getting frustrated with that Baycom par96. The ser12 worked well on
my system.
Does anybody happen to have a running Baycom par96 connected to a kernel 2.2.x
system? If so, I'd really like to take a look at the init-scripts and configs
(all I want to do is to establish a s
Hello Hans-Peter,
Thanks for your helpful e-mail!
On 27-Oct-99 Hans-Peter Zorn wrote:
>> betazed:~ # ifconfig bcp0 hw ax25 DL8AM-15 up
>> SIOCSIFFLAGS: Device not configured
> Hmm, that error message irritates me. Perhaps something else is wrong,
Does anybody know what an error message like th
Hi again,
After having had some basic success using the Baycom ser12 modem with Linux
(linkt worked, though pms was somewhat stubborn), I tried to upgrade to a
Baycom par96, which left me with a bunch of new problems at the lowest level.
After compiling the suitable module it loaded perfectly u
Hello Gerd,
Thank you for your quick reply. It's appreciated! :-)
On 22-Oct-99 Gerd wrote:
> Why do you want to use /dev/bc0 ?
> They are obsolete.
At that point I didn't know that bcsf0 et al. were network devices. So I kept
looking for them in the /dev directory. %-)
> You can work with if
Hi again,
I've had some success with my BayCom modem! A big thank you to all the helping
hands! :-) However, I got stuck again when I tried to use "call" as suggested
in the HOWTO.
betazed:~ # setserial /dev/ttyS1 uart none
betazed:~ # modprobe hdlcdrv
betazed:~ # modprobe baycom_ser_fdx mode="
Hello Kai,
Thanks for your reply and the info included! It's great to see that SuSE takes
an active interest in ham radio.
On 22-Oct-99 Kai Altenfelder wrote:
> The ax25-utils are obsolet nowadays with kernel version 2.2.x, ax25apps
> and ax25tool are the successors of it. The now missing skele
Hello Tomi,
Thank you very much for your quick help. It's appreciated!
On 22-Oct-99 Tomi Manninen OH2BNS wrote:
> The new baycom devices are _network_ devices and they don't have an entry
> in /dev/. Try "ifconfig bcsf0" to see if the network device is there.
Oh, now I understand!!! So my BayC
Hello there everybody,
Since I am new to this mailing list, I hope I won't ask a question that has
been asked a million times over.
It's about the serial BayCom 1200. After having read all the documentation I
could find via the InterNet (especially the AX25-HOWTO and the linkt online
documentat
