On Wed, Oct 5, 2011 at 3:49 PM, Udi Finkelstein linux...@udif.com wrote:
If you want to simply add a high-speed connection, you may be better off
with an FTDI chip attached to the USB connection.
I don't know how fast the FT232RL is, but the FT232H has a parallel
interface that is certainly
On Tue, Oct 4, 2011 at 6:02 PM, Shachar Shemesh shac...@shemesh.biz wrote:
On 09/15/2011 02:37 PM, Erez D wrote:
Hello
We need to design a system, which communicates data at rates of around
30Mbs via ethernet.
We are designing the hardware from scratch.
I Thought of assembling a board
Hi Erez,
On Wed, Oct 05, 2011 at 09:53:02AM +0200, Erez D wrote:
In the sheevaplug (actually i tested the dockstar).
i got the dockstar for 50USD in israel (used it as an eval board)
it has a 1GB ethernet, i read reports saying it is able to acheve actual
around 320Mbps rates as a router.
i
On Wed, Oct 5, 2011 at 10:18 AM, Baruch Siach bar...@tkos.co.il wrote:
Hi Erez,
On Wed, Oct 05, 2011 at 09:53:02AM +0200, Erez D wrote:
In the sheevaplug (actually i tested the dockstar).
i got the dockstar for 50USD in israel (used it as an eval board)
it has a 1GB ethernet, i read
On 10/05/2011 10:28 AM, Erez D wrote:
The serial baud rates are derived from a clock, which is divided by a
divider (and then usually divided again by 4).
you can set the baud rate to any tandard one (if supported by hardware).
however you can simply supply the divide_by value (if hardware
On Wed, Oct 5, 2011 at 11:14 AM, Shachar Shemesh shac...@shemesh.bizwrote:
On 10/05/2011 10:28 AM, Erez D wrote:
The serial baud rates are derived from a clock, which is divided by a
divider (and then usually divided again by 4).
you can set the baud rate to any tandard one (if supported
If you want to simply add a high-speed connection, you may be better off
with an FTDI chip attached to the USB connection.
I don't know how fast the FT232RL is, but the FT232H has a parallel
interface that is certainly fast enough to get all the USB2 bandwidth.
btw, I found open-rd.org. as far as i see it is a sheeva-plug, and there are
both software, hardware schematics etc...
i think the seeva-plug derivatives (e.g seagate dockstar) are a subset of
that design
I saw websites with instructions on how to add anothe GBE or how to add an
SD to the
On 09/15/2011 02:37 PM, Erez D wrote:
Hello
We need to design a system, which communicates data at rates of around
30Mbs via ethernet.
We are designing the hardware from scratch.
I Thought of assembling a board with a processor (which will run
linux) and a small fpga.
However, I do not
Hello
We need to design a system, which communicates data at rates of around 30Mbs
via ethernet.
We are designing the hardware from scratch.
I Thought of assembling a board with a processor (which will run linux) and
a small fpga.
However, I do not want to invent the wheel. don't want to port
On Sep 15, 2011, at 2:37 PM, Erez D wrote:
We need to design a system, which communicates data at rates of
around 30Mbs via ethernet.
We are designing the hardware from scratch.
Is that bits or bytes? 30M BITS per second is high end router,
dedicated 100Base T, 30M bytes per second is
On Thu, Sep 15, 2011 at 3:06 PM, geoffrey mendelson
geoffreymendel...@gmail.com wrote:
On Sep 15, 2011, at 2:37 PM, Erez D wrote:
We need to design a system, which communicates data at rates of around
30Mbs via ethernet.
We are designing the hardware from scratch.
Is that bits or
12 matches
Mail list logo