Luc de Louw wrote:
>
> Hi!
>
> On Wed, 24 Jan 2001, Juri Haberland wrote:
>
> > [EMAIL PROTECTED] wrote:
> > >
> > > linux-2.4.0
> > >
> > > I have quite a lot of these log messages:
>
>
> >
> > Upgrade your nfs-utils to version 0.2.1
>
> Maybee a dumb question: how to find out the version
Jeremy Hansen wrote:
>
> Just curious if others have noticed that hotmail is unable to deal with
> ECN and wondering if this is a standard that should be encouraged, as in
> should I tell hotmail that perhaps they should look into supporting it, or
> should I not waste my breath and echo 0 >
Hi friends,
I am working in India, and i want to
implement remote desktop protocol for my thin client
so i downloaded the source from the site
www.rdesktop.org and thereafter i tried to execute the
command and i got the following messages :
bash# rdesktop -l 192.168.1.121(my server's IP
sybil.uio.no# uname -a
Linux sybil.uio.no 2.4.1-pre2 #2 SMP Mon Jan 15 09:16:02 CET 2001 i686 unknown
(It's pre3, not pre2.)
Is the bug below a known issue? If not, ask me for more details if
needed. Common for all processes killed is that they have been
SIGSTOPed and then SIGCONTed
I seem to be getting more and more patches that have tabs/spaces
broken and line wrap damage. I've dumped a pile in my queue including
some pcmcia support for sh3 and the like
If your patches are getting ignored please mail yourself a copy and
check your mailer works. If you have problems use
I'm trying to write a server that is able to run specific
diags against various ethernet drivers, knowing only the
interface name (ie eth0).
Can anyone think of a reasonably easy way to tell what driver
(and thus what diag-code), to run against a particular interface?
This information is spit
Just curious if others have noticed that hotmail is unable to deal with
ECN and wondering if this is a standard that should be encouraged, as in
should I tell hotmail that perhaps they should look into supporting it, or
should I not waste my breath and echo 0 > /proc/sys/net/ipv4/tcp_ecn?
On Wed, Jan 24, 2001 at 10:44:43AM -0500, Jeff Garzik wrote:
>I just mentioned this to Bakonyi Ferenc <[EMAIL PROTECTED]>, who
>said that it would be better to roll a new patch without the v4l stuff,
>and update rivafb. rivafb is apparently stable but the v4l code is not
>(yet).
Hi,
I'm
Working to clean all the modular natures of ATA/IDE now
On Wed, 24 Jan 2001, Sergey Kubushin wrote:
> On Wed, 24 Jan 2001, Alan Cox wrote:
>
> Modules don't load. I do usually compile heavily modular kernels, with ide
> and ext2fs being also modular. When trying to load them from initrd, I
Ok:
calypso 47# uname -a
Linux calypso 2.4.0 #6 SMP Wed Jan 24 20:00:01 PST 2001 alpha unknown
calypso 48#
I used the patch at the bottom of this except for the part that patches:
linux/include/asm-alpha/unistd.h
Thanks much for your help on that... Slackware is rocking away on my
Alpha
Found a fix
leave the :
extern long sys_wait4(int, int *, int, struct rusage *);
line in:
linux/include/asm-alpha/unistd.h
On Wed, 24 Jan 2001, Ivan Kokshaysky wrote:
> On Wed, Jan 24, 2001 at 08:23:13AM -0500, Peter Rival wrote:
> > Yeah, I've been bitten by this quite often. Basically,
Sorry it took so long to get back to you on this:
I applied the patch and now am getting this:
alpha_ksyms.c: At top level:
alpha_ksyms.c:133: `sys_wait4' undeclared here (not in a function)
alpha_ksyms.c:133: initializer element for `__ksymtab_sys_wait4.value' is not constant
make[1]: ***
> > http://samba.org/picturebook
> >
> > should have it
>
> Ah, Mr Cox. You are a truly warm and wonderful human being. I can
>
Thank Tridge not me, all I had to do was ask him the URL 8)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
>Hello all,
> I included everyone (boy + dog) so everyone knows the result.
>
> After much testing here is the results. I used the following patch
>
> linux-aic7xxx-6.0.9BETA-2.4.0.diffs
>
> against the ne 2.4.0 kernel sans my patch and happy to report it
> cleaned up the TCQ problem.
Thanks
Alan Cox wrote:
>
> > if anyone finds a way of dimming the brightness make sure you post!
> > besides killing the battery, it also makes it hard to use in dark
> > places such as night flights. i feel as if i'm lighting up the
> > cabin in these cases.
>
> http://samba.org/picturebook
>
>
On Thu, 25 Jan 2001, Anton Altaparmakov wrote:
Don't be silly. I do not use RedHat (I do my own distribution, KSI Linux)
and their mkinitrd is just a script. Furthermore, I don't have ext2fs in the
kernel so their mkinitrd won't work. I do not have ide in the kernel
either...
> As I don't use
As I don't use initrd at all I am a bit out of my depth here but according
to Documentation/Changes you need a new mkinitrd and the version suggested
seems to be 2.8-1. Checking my up-to-date RedHat 7.0 workstation it has
mkinitrd version 2.6-1, so this might be your problem?
Best regards,
On Wed, 24 Jan 2001, Robert Dale wrote:
>
> I bought a laptop which uses an Intel CPU with SpeedStep. Sometimes when
> I boot the kernel recognizes the full MHz, and other times it is much less.
> And of course the BogoMIPS reflect this we well.
>
> I'm wondering if this has any sort of
On Wed, 24 Jan 2001, Alan Cox wrote:
Modules don't load. I do usually compile heavily modular kernels, with ide
and ext2fs being also modular. When trying to load them from initrd, I have
the following output:
=== Cut ===
ide-mod.o: Can't handle sections of type 32131
ide-probe-mod.o: Can't
> does that mean, if I apply ac11 I have already the same like pre9 patch
> plus you patches?
Yes
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
> if anyone finds a way of dimming the brightness make sure you post!
> besides killing the battery, it also makes it hard to use in dark
> places such as night flights. i feel as if i'm lighting up the
> cabin in these cases.
http://samba.org/picturebook
should have it
-
To unsubscribe from
> I was wondering if someone could tell me where I can find
> Xeon Pentium III cpu error messages/codes
In the intel databook. Generally an MCE indicates hardware/power/cooling
issues
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL
[J. A. Magallon]
> I know Linux will never be compiled with any other thing than
> gcc. But what I do not understand is why if there is a standard C way
> of doing something you have to use an strange extension of gcc.
__attribute__((noreturn)) may do other things besides suppress the "no
"David S. Miller" wrote:
>
> I'm back from OZ, and to help deal with my sudden lack of Victoria
> Bitter,
aww.. Poor Dave. I'll have an extra one for you.
> ...
> There is one critical failure I saw reported with zerocopy, where all
> transmits basically failed using a 3c59x card. This
> I sent the below patch to Linus earlier today. I didn't copy
> any mailing list because it's a bit security-related. Oh well.
Its been in -ac for while but using a define since its a constant
so it not a secret 8)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> I think, that is not what we need. Once Ingo wrote, that since HTTP
> serving can also be viewed as a kind of fileserving, it should be
> possible to create a TUX like module for the same framwork, that serves
> using the SMB protocol instead of HTTP...
Kernel SMB is basically not a sane
On 01.25 Peter Samuelson wrote:
>
> [J. A. Magallon]
> > It is harmless, 'cause the last sentence in the funtion is a panic,
> > but it is good to add the 'return 0', just to shut up the compiler.
>
> The correct fix is __attribute__((noreturn)) in the panic() prototype.
> As it happens, this
Hi all,
Well, I upgraded my system to glibc 2.2.1 with few problems. Unfortunately,
there are no improvements in my stability problems. X still dies.
So, I ask again, how can I debug this? How can I determine if this is a
kernel problem or not?
Thanks,
--Rainer
-
To
On Thu, 25 Jan 2001 00:59:07 +0100,
"J . A . Magallon" <[EMAIL PROTECTED]> wrote:
>Just a silly question. The pcmcia modules in 2.4.x get installed in
>/lib/modules/`uname -r`/pcmcia, instead of
>/lib/modules/`uname -r`/kernel/
>
>Is there any special reason for that or is just a harmelss buglet
Because you do not have IDE_PCI enabled.
On Wed, 24 Jan 2001, mirabilos wrote:
> I get:
>
> ide: Assuming 40 MHz system bus speed for PIO modes; override with idebus=xx
>
> ??? you all say it's 33 hardcoded...
>
> -BEGIN GEEK CODE BLOCK-
> Version:
[J. A. Magallon]
> It is harmless, 'cause the last sentence in the funtion is a panic,
> but it is good to add the 'return 0', just to shut up the compiler.
The correct fix is __attribute__((noreturn)) in the panic() prototype.
As it happens, this has already been done
Peter
---
On Wed, 24 Jan 2001 [EMAIL PROTECTED] wrote:
> The kernel always says:
>
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>
> at boot time. How would I know if it's safe to say idebus=66? The
> documentation is fairly vague on this.
When the manual for your
On Wed, 24 Jan 2001, Matthias Andree wrote:
> This looks better and it makes FreeBSD able to ls the directory, and on
> touch /mnt/try, I get EROFS on the client, so this is okay; however, the
> access reply does not include EXECUTE permissions which I find strange,
> since the client lists
> > In the 2.2 kernel, I could do the following:
> > echo 1 > /proc/sys/net/ipv4/conf/all/hidden
> > echo 1 > /proc/sys/net/ipv4/conf/lo/hidden
> >
> > The 2.4 kernel does not have these sysctl files any more. Why was
> > this functionality taken out? or was it simply moved to another place
> >
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux voyager 2.4.1-pre9 #1 nie sty 21 23:42:43 CET 2001 i686 pld
Kernel modules 2.4.1
Gnu C 2.95.3
Gnu Make 3.79.1
Binutils
On Wed, Jan 24 2001, First Name Last Name wrote:
> I am seeing hard lockup without OOPS when I write
> 60-40MB into a filesystem created on a regular file via
> loop device, and the problem is quite reproducible.
> Is anybody else suffering from a similar problem?
Yes, at least judging by the
"Maciej W. Rozycki" wrote:
>
> On Wed, 24 Jan 2001, Andrew Morton wrote:
>
> > This is due to a lost APIC interrupt acknowledgement. A workaround
> > is to boot with the `noapic' LILO option.
> >
> > This long-standing and very nasty problem was discussed extensively
> > a week or two ago.
I bought a laptop which uses an Intel CPU with SpeedStep. Sometimes when
I boot the kernel recognizes the full MHz, and other times it is much less.
And of course the BogoMIPS reflect this we well.
I'm wondering if this has any sort of side-effect on the kernel? Will
it disrupt timing loops
In article <[EMAIL PROTECTED]> you wrote:
>> -arp will do that
> Not in Linux 2.2+, all addresses are replied. -arp only
> means "don't talk ARP", in our case we talk through eth0, so we don't
> want to stop it, right?
why not? if you hard wire the MAC Address of your web servers to all
I am seeing hard lockup without OOPS when I write
60-40MB into a filesystem created on a regular file via
loop device, and the problem is quite reproducible.
Is anybody else suffering from a similar problem?
# mount | grep export/scratch
/dev/hda9 on /export/scratch type ext2 (rw)
# dd
Hi everyone,
Just a silly question. The pcmcia modules in 2.4.x get installed in
/lib/modules/`uname -r`/pcmcia, instead of
/lib/modules/`uname -r`/kernel/
Is there any special reason for that or is just a harmelss buglet ?
--
J.A. Magallon
> can someone explain what is nagle or pinpoint explanation :)
nagel's algorithm is used to "wait" with sending of small packets until more
data is available, because sending biger packets has less overhead.
greetings
Bernd
-
To unsubscribe from this list: send the line "unsubscribe
You are correct, this is supposed to be handled by ACPI. However, this has
yet to be implemented in Linux's ACPI support. Check back in 6 months. :)
Regards -- Andy
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, January 24, 2001 2:52 PM
>
I have agpgart compiled into the kernel with both (Intel 440LX/BX/GX and
I815/I840/I850) and Intel I810/I815 drivers. When the kernel boots I get:
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 27M
agppart: agpgart: Detected an Intel
In file included from /usr/src/linux/include/linux/raid/md.h:51,
from init/main.c:25:
/usr/src/linux/include/linux/raid/md_k.h: In function `pers_to_level':
/usr/src/linux/include/linux/raid/md_k.h:39: warning: control reaches end of
non-void function
It is harmless, 'cause the
After upgrading to 2.4.0, insertion of the es1371 modules causes my
machine to freeze right after printing
es1371: version v0.26 time 14:24:35 Jan 24 2001
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x02
PCI: Assigned IRQ11 for device 00:0a.0
The box
[Jonathan Earle]
> Hmm.. so things like routing should be faster then?
Other network traffic too. Say you have an FTP server running and it
wants to send a file out to a client. The old way was for it to read()
the file into memory and then write() it to the network socket. To
avoid having
I'm not positive if this is a bug, I'm only able to confirm this from one
other source. Somewhere between (I can't remember exactly which kernel my
server started on) ~2.2.14(or 15) and 2.2.18 my ppp connection
periodically hangs and I have to restart the connection. My situation is
a modem
On Wed, 24 Jan 2001, Vojtech Pavlik wrote:
> On Wed, Jan 24, 2001 at 10:04:50AM -0800, Andre Hedrick wrote:
>
> > > Well, I know this. But I fear hardcoded timings won't really help here,
> > > unless everyone out there ran their chipsets at 33 MHz, in which case the
> >
> > You have to run
On Wed, Jan 24, 2001 at 11:42:52PM +0100, [EMAIL PROTECTED] wrote:
> when linking
Can you privately email me your .config? pre10 should mostly work otherwise
as only a few things are missing now (new bugfixes, old fixes in
drivers/macintosh, and some fb updates to send off to
Hello!
I'm using 2.4.0-ac11 with devfs support. Something is very strange in the
way how devfs behaves with respect to OSS sound drivers.
devfsd version 1.3.10 is running. There is an entry "alias /dev/audio
/dev/sound" in modules.devfs, which is the default.
If the "sound" module is not
I have Alpha system based on AMD 751 & ALI 1543C chipset (Nautilus).
Since I compiled and boot kernel 2.4.0 problem appears.
1. don't work IDE DMA mode at all, only PIO
2. don't work eepro100 support for Intel Ethernet card - driver
reports I use non-busmaster slot (2.2.16 works fine)
3. many
Nono it can't be the BIOS coz then it won't work under Losedoze (old vers, e.g. Wfw
3.11 with Win32s).
AFAIK it's the "keyboard controller" (i.e. the chipset)
For my Scenic Mobile 510 everything works fine under DOS, NT 5 (though _this_ Windoze
_has_ advanced features) and Linnux.
mirabilos
f5ibh wrote:
> > XF4.0.x should work reasonably well. Or you can run accelerated XF on mga:
> > matroxfb is compatible with accelerated XF 3.3.x, and with accelerated
> > XF 4.0.x WITHOUT enabled DRI (as DRI code reprograms hardware even if
> > X are on background) (and 'Option "UseFBDev"' is
On Wed, Jan 24, 2001 at 05:38:54PM -0500, Mark Smith wrote:
> On Wed, Jan 24, 2001 at 07:40:14PM +, Steven Ellmore wrote:
> > My VAIO Z505HS brightness control works under Linux.
> >
> > Shift + Fn + Brightness (F5) dims
> > Fn + Brightness brightens
[...]
> none of these things change my
when linking
ld -T arch/ppc/vmlinux.lds -Ttext 0xc000 -Bstatic arch/ppc/kernel/head.o
init/main.o
init/version.o \
--start-group \
arch/ppc/kernel/kernel.o arch/ppc/mm/mm.o arch/ppc/lib/lib.o kernel/kernel.o
mm/mm.o fs/fs.o
ipc/ipc.o arch/ppc/xmon/x.o \
> Previously unseen. What could be the cause of these messages?
> (Abit BH6 (Intel BX), Logitech Mouseman+ USB)
>
> Jan 24 21:39:15 iq kernel: usb.c: bw_alloc reduced by 118 to 0 for 0
> requesters
> Jan 24 21:39:16 iq kernel: usb.c: bw_alloc increased by 118
> to 118 for 1 requesters
On Wed, Jan 24, 2001 at 07:40:14PM +, Steven Ellmore wrote:
> My VAIO Z505HS brightness control works under Linux.
>
> Shift + Fn + Brightness (F5) dims
> Fn + Brightness brightens
>
> If it makes a difference I'm using Left Shift and Left Fn and as you
> might expect I'm holding both of
I've seen on Kernel Traffic that some people have reported an ext2
corruption with kernel 2.4.0.
It happened to me yesterday with a different configuration than the one
reported on the original posting so i just want to report the problem
again :
I was doing some standard work on my system and
I get:
ide: Assuming 40 MHz system bus speed for PIO modes; override with idebus=xx
??? you all say it's 33 hardcoded...
-BEGIN GEEK CODE BLOCK-
Version: 3.12+custom(^=href;C-style-comments)
GO/S dx@ s--: a---> C++ UL P--- L++$(-^lang) E/joe W+(++)
N? o K? w-(+$) O+>+++ M--
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer
-fno-strict-aliasing -D__powerpc__ -fsigned-char -msoft-float -pipe -ffixed-r2
-Wno-uninitialized
-mmultiple -mstring-c -o pmac_pci.o pmac_pci.c
pmac_pci.c: In function
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer
-fno-strict-aliasing -D__powerpc__ -fsigned-char -msoft-float -pipe -ffixed-r2
-Wno-uninitialized
-mmultiple -mstring-c -o signal.o signal.c
signal.c:57: conflicting types for `sys_wait4'
Hello,
On 24 Jan 2001, Bernd Eckenfels wrote:
> > The problem is complex and can't be solved with ifconfig -arp
>
> why?
Search for "arp" in the LVS mailing list:
http://marc.theaimsgroup.com/?l=linux-virtual-server=1=2
This problem is analyzed from many perspectives. The solution
The kernel always says:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
at boot time. How would I know if it's safe to say idebus=66? The
documentation is fairly vague on this.
Thanks,
Dave
--
David M. Meyer
[EMAIL PROTECTED]
-
To unsubscribe from this
Previously unseen. What could be the cause of these messages?
(Abit BH6 (Intel BX), Logitech Mouseman+ USB)
Jan 24 21:39:15 iq kernel: usb.c: bw_alloc reduced by 118 to 0 for 0
requesters
Jan 24 21:39:16 iq kernel: usb.c: bw_alloc increased by 118 to 118 for 1
requesters
Jan 24 21:44:22 iq
Hi Petr,
> It looks like that there is some problem with screen offset computation then.
> Can you try 'video=matrox:cross4MB' instead of '...:nopan'? I did not
video=matrox:cross4MB works too !
> XF4.0.x should work reasonably well. Or you can run accelerated XF on mga:
> matroxfb is
According to Grover, Andrew:
> This is pretty weird, since the latest ACPI update went in pre10, and it was
> pretty minor. That you are saying problems started in pre8 implies this is
> not a problem with the ACPI driver, but something else.. hmm..
>
> So it worked in pre7 and broke in pre8?
I
Comprehensive System Accounting (CSA) provides the ability to
track system resource utilization per job and charge back
the cost of those resources to users. Los Alamos National
Laboratory (LANL) and SGI worked together to provide this
job accounting feature on Linux.
CSA job
This is pretty weird, since the latest ACPI update went in pre10, and it was
pretty minor. That you are saying problems started in pre8 implies this is
not a problem with the ACPI driver, but something else.. hmm..
So it worked in pre7 and broke in pre8?
Regards -- Andy
> Date: Wed, 24 Jan
Jie Zhou wrote:
> > > 3. After I run the /sbin/lilo, it says the new kernel is added to the
> > > system. HOwever when I restart the system and go into the labeled kernel
> > > I choose, the system gets stucked after these two lines:
> > > Loading kernel...
> > > Uncompressing
The eepro100 driver appears to have timeout problems with the
Intel PRO/100 VM network card. I have such a card embedded in
my work machine.
The NIC has a 82562-equivalent controller chip.
The eepro100 driver does correctly initialize the network card and
network traffic does work for a time
> Recently, i got a new and shiny PIII 700Mhz, 64MB box, with Intel
> motherboard based on the i815e chipset, with intergrated
> NIC/Audio/Graphic.
> The machine ran smoothly with the supplied 2.2.16 kernel, yet i decided
> to upgrade to 2.4.0.
> But since upgrading to 2.4.0, i have
> > What are "zerocopy patch set"s?
>
> Basically, if you want to send something to the network, the
> kernel has to
> copy your data to its memory space. It is an overhead and with these
> patches, the kernel doesn't has to do it. So it is faster.
> Moreover, few
> ethernet cards are able to
[EMAIL PROTECTED] ("Jonathan Earle") writes:
> > I'm back from OZ, and to help deal with my sudden lack of Victoria
> > Bitter, I've made a new zerocopy patch set.
>
> What are "zerocopy patch set"s?
Basically, if you want to send something to the network, the kernel has to
copy your data to
Los Alamos National Laboratory (LANL) and SGI collaborated
to provide an accounting solution called Comprehensive System
Accounting (CSA). CSA is for demanding Linux users who require the
ability to track system resource utilization and charge back the cost
of those resources used to the actual
úÄÒÁ×ÓÔ×ÕÊÔÅ!
éÚ×ÉÎÉÔÅ ÍÅÎÑ ÚÁ ×ÔÏÒÖÅÎÉÅ × ÷ÁÛÉ ÐÏËÏÉ, Ñ ÎÅ ÏÔÎÉÍÕ
ÍÎÏÇÏ ×ÒÅÍÅÎÉ Õ ÷ÁÓ.
--
ðÏÌÕÞÉÔÅ VISA-ËÁÒÔÕ ÂÅÚ ÇÏÄÏ×ÏÊ ÐÌÁÔÙ.
ôÁË ÖÅ ×ÁÍ ÂÕÄÕÔ ÐÌÁÔÉÔØ ÚÁ ÒÅÆÅÒÁÌÏ× ÐÅÒ×ÏÇÏ ÕÒÏ×ÎÑ - $10.00 É ÐÏ
$2.00 ÚÁ ÒÅÆÅÒÁÌÏ× ÄÏ 10-ÇÏ
On Wed, 24 Jan 2001, Jie Zhou wrote:
> 2. after 'make bzImage', if I don't have any module to install, then I
> don't need to run either 'make modules' or 'make modules_install',
> is this correct?
Correct.
Cheers,
- Bill
Jie Zhou wrote:
>
> Hi, all,
>
> I got about 30 warning msgs like this during the process of "make
> bzImage", is it a fatal problem or not?
> "Warning: using '%eax' instead of '%ax' due to "l" suffix"
Nothing to worry about.
> 2. after 'make bzImage', if I don't have any module to
On 24 Jan 2001, Mark Longair wrote:
> It turned out that this was caused by using autofw to forward a range
> of ports (2300-2400 in this case.) It seems that these ports aren't
> reserved in any way, so eventually the server tries to use one as a
> local port on an outgoing connection.
>
> I'm
> I'm back from OZ, and to help deal with my sudden lack of Victoria
> Bitter, I've made a new zerocopy patch set.
What are "zerocopy patch set"s?
Cheers!
Jon
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the
Hi everyone!
I have a Dell computer with this marvelous builtin sound chipset. It's an
AC97 compatable and it plays only sounds at 48 kHz, nothing more. I just
got an oops this afternoon. I decoded it and got many errors with acpi, I
don't know if it's normal or not but here is the
** Reply to message from Jeff Hartmann <[EMAIL PROTECTED]> on Wed, 24 Jan
2001 14:15:32 -0700
> Pages with multiple mappings aren't really supported by the Intel ia32
> architecture. The trick you do above works, but is strongly discouraged
> by the Intel documentation. The documentation
Hi, all,
I got about 30 warning msgs like this during the process of "make
bzImage", is it a fatal problem or not?
"Warning: using '%eax' instead of '%ax' due to "l" suffix"
2. after 'make bzImage', if I don't have any module to install, then I
don't need to run either 'make modules' or
I'm back from OZ, and to help deal with my sudden lack of Victoria
Bitter, I've made a new zerocopy patch set. You will notice that
it is now significantly smaller than previous versions. This is
because all of the straight bug fixes and cleanups in my tree made
it into 2.4.1-pre10. What
Timur Tabi wrote:
> ** Reply to message from Jeff Hartmann <[EMAIL PROTECTED]> on Wed, 24 Jan
> 2001 13:41:41 -0700
>
>
>> When you mark a page UCWC, you better
>> have removed all cached mappings or your asking for REAL trouble.
>
>
> What exactly do you mean by "removed all cached
David S. Miller [[EMAIL PROTECTED]] wrote:
> Wrong, your one-line fix may make it build correctly but it
> will not produce working quota 32-bit syscall code there.
>
> Someone needs to fixup the conversion code, I don't have time to track
> the AC series (it actually duplicates a lot of
Hi,
Looking at the code for sock_no_fcntl() in net/core.c, I cannot specify
"0" as a value for F_SETOWN, unless I'm the superuser. I believe this to
be a bug, it stops de-registering an interest in SIGURG signals. Let me
know if you want a patch.
Cheers
Chris
-
To unsubscribe from this list:
On Wed, 24 Jan 2001, Isabelle, Francois wrote:
> There is something I try to do using Linux and I think you may have a clue:
>
> I want to use the external loopback of my ethernet interface to test it. I
> want the data to actually go through the cable and I don't want internal
> logic to
On 18 Jan 2001, Kai Henningsen wrote:
> > This info is just plain wrong. Unfortunately, ISDN syncPPP isn't using the
> > generic PPP layer yet.
>
> So, is this still planned? Any sort of timeline?
Yes, however, it's always planned to dump the old ISDN link layer at some
point and switch over
Hello!
> must be). Is there another RFC?
It is exactly this place.
As soon as BSD uses this feature, it is must for us.
> Could you check what happened in line 2066 of this tcpdump?
> 2066 16:31:43.108759 eth0 > static.8664 > dynamic.ih.lucent.com.39406:
> . 1583720:1583720(0) ack
On Wed, 24 Jan 2001 08:32:35 -0500,
Paul Gortmaker <[EMAIL PROTECTED]> wrote:
>I'm curious as to what boot argument equivalent you envision for e.g.
>
>options ne io=0x280,0x300 irq=10,12 bad=0,1
ne.io=0x280,0x300 ne.irq=10,12 ne.bad=0,1. I might even be generous
and handle ne{io=0x280,0x300
On Wed, Jan 24, 2001 at 11:03:34PM +0300, [EMAIL PROTECTED] wrote:
> Hello!
>
> > I read through the tcpdump, and it seems that Linux completely ignores
> > packets with out-of-window sequence numbers:
>
> Yes, Linux is __very__ not right doing this. RFC requires to accept
> ACK, URG and RST on
> Copying between vfat <-> vfat partitions is so slow. It seems
> that it's vfat/msdos kernel driver problem because I tried to copy
I reported this years ago, with a 700 kB file on a floppy and
a 4 MB file on a Zip disk. In both cases mcopy was several times
faster than the kernel code.
-
To
** Reply to message from Jeff Hartmann <[EMAIL PROTECTED]> on Wed, 24 Jan
2001 13:41:41 -0700
> When you mark a page UCWC, you better
> have removed all cached mappings or your asking for REAL trouble.
What exactly do you mean by "removed all cached mappings"? Does that mean that
if one
There is something I try to do using Linux and I think you may have a clue:
I want to use the external loopback of my ethernet interface to test it. I
want the data to actually go through the cable and I don't want internal
logic to bypass this process.
There is only one interface available, so
Timur Tabi wrote:
> ** Reply to message from Jeff Hartmann <[EMAIL PROTECTED]> on Wed, 24 Jan
> 2001 11:45:43 -0700
>
>
>
>> I'm actually writing support for the PAT as we speak. I already have
>> working code for PAT setup. Just having a parameter for ioremap is not
>> enough,
Wrong, your one-line fix may make it build correctly but it
will not produce working quota 32-bit syscall code there.
Someone needs to fixup the conversion code, I don't have time to track
the AC series (it actually duplicates a lot of networking stuff I just
pushed to Linus and ended up in
> Yes, Linux is __very__ not right doing this. RFC requires to accept
> ACK, URG and RST on any segment adjacent to window, even if window
> is zero.
>
Interesting: I checked the RFC 793 and came to the conclusion that Linux
is correct. ("special allowance should be made to accept valid ACKs"
can someone explain what is nagle or pinpoint explanation :)
lynx
On Sun, 21 Jan 2001, Chris Wedgwood wrote:
> On Sat, Jan 20, 2001 at 07:35:12PM -0500, Dan Maas wrote:
>
> Bingo! With this fix, 2.2.18 performance becomes almost identical to 2.4.0
> performance. I assume 2.4.0
** Reply to message from Jeff Hartmann <[EMAIL PROTECTED]> on Wed, 24 Jan
2001 11:45:43 -0700
> I'm actually writing support for the PAT as we speak. I already have
> working code for PAT setup. Just having a parameter for ioremap is not
> enough, unfortunately. According to the Intel
1 - 100 of 444 matches
Mail list logo
